Aller au contenu

Pas de volume suite à upgrade de 6.0 à 6.0.3 (sur DS1010+)


simkard

Messages recommandés

Hello à tous,

Récemment, je me suis amusé à faire ingurgiter les packages de DSM plus récents pour mon DS1010+.

Evidemment, il aura fallu extraire, modifier, compacter, calculer des checksums, etc ... sur les fichiers, mais dans l'ensemble tout s'est bien passé.

Néanmoins, des choses cloches entre la 6.0 et la 6.0.3 (et supérieures) :

  • Plus d'affichage de la consommation CPU/RAM (Moniteur système refuse de s'ouvrir avec une erreur étrange // voir screenshot attaché)
  • Le(s) volume(s) sont automatiquement démontés mais restent accessibles par l'accès SSH
  • Les journaux /var/log sont remplis de saletés probablement liées à la root cause du problème :
    • /var/log/messages
      • 07:58:10+02:00 Synology kernel: [    0.000000] ACPI: RSDP 00000000000f9db0 00014 (v00 ACPIAM)
        07:58:10+02:00 Synology kernel: [    0.000000] ACPI: RSDT 00000000bf690000 0003C (v01 041610 RSDT1824 20100416 MSFT 00000097)
        07:58:10+02:00 Synology kernel: [    0.000000] ACPI: FACP 00000000bf690200 00084 (v01 041610 FACP1824 20100416 MSFT 00000097)
        07:58:10+02:00 Synology kernel: [    0.000000] ACPI: DSDT 00000000bf690440 06848 (v01  1AAAA 1AAAA000 00000000 INTL 20051117)
        07:58:10+02:00 Synology kernel: [    0.000000] ACPI: FACS 00000000bf69e000 00040
        07:58:10+02:00 Synology kernel: [    0.000000] ACPI: APIC 00000000bf690390 0006C (v01 041610 APIC1824 20100416 MSFT 00000097)
        07:58:10+02:00 Synology kernel: [    0.000000] ACPI: MCFG 00000000bf690400 0003C (v01 041610 OEMMCFG  20100416 MSFT 00000097)
        07:58:10+02:00 Synology kernel: [    0.000000] ACPI: OEMB 00000000bf69e040 00072 (v01 041610 OEMB1824 20100416 MSFT 00000097)
        07:58:10+02:00 Synology kernel: [    0.000000] ACPI: HPET 00000000bf69a440 00038 (v01 041610 OEMHPET  20100416 MSFT 00000097)
        07:58:10+02:00 Synology kernel: [    0.000000] ACPI: GSCI 00000000bf69e0c0 02024 (v01 041610 GMCHSCI  20100416 MSFT 00000097)
        07:58:10+02:00 Synology kernel: [    0.000000] Zone ranges:
        07:58:10+02:00 Synology kernel: [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
        07:58:10+02:00 Synology kernel: [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
        07:58:10+02:00 Synology kernel: [    0.000000]   Normal   empty
        07:58:10+02:00 Synology kernel: [    0.000000] Movable zone start for each node
        07:58:10+02:00 Synology kernel: [    0.000000] Early memory node ranges
        07:58:10+02:00 Synology kernel: [    0.000000]   node   0: [mem 0x00001000-0x0009efff]
        07:58:10+02:00 Synology kernel: [    0.000000]   node   0: [mem 0x00100000-0xbf68ffff]
        07:58:10+02:00 Synology kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 773178
        07:58:10+02:00 Synology kernel: [    0.000000] Internal HD num: 0
        07:58:10+02:00 Synology kernel: [    0.000000] Internal netif num: 2
        07:58:10+02:00 Synology kernel: [    0.000000] Synology Hardware Version: DS1010+-j
        07:58:10+02:00 Synology kernel: [    0.000000] Serial Number: XXXXXXXXXX
        07:58:10+02:00 Synology kernel: [    0.025533] ACPI: All ACPI Tables successfully acquired
        07:58:10+02:00 Synology kernel: [    0.200354] raid6: sse2x1   gen()   113 MB/s
        07:58:10+02:00 Synology kernel: [    0.221200] raid6: sse2x1   xor()   701 MB/s
        07:58:10+02:00 Synology kernel: [    0.242332] raid6: sse2x2   gen()   390 MB/s
        07:58:10+02:00 Synology kernel: [    0.263218] raid6: sse2x2   xor()  1220 MB/s
        07:58:10+02:00 Synology kernel: [    0.284260] raid6: sse2x4   gen()   746 MB/s
        07:58:10+02:00 Synology kernel: [    0.305199] raid6: sse2x4   xor()  1365 MB/s
        07:58:10+02:00 Synology kernel: [    0.310006] raid6: using algorithm sse2x4 gen() (746 MB/s)
        07:58:10+02:00 Synology kernel: [    0.315005] raid6: .... xor() 1365 MB/s, rmw enabled
        07:58:10+02:00 Synology kernel: [    0.320005] raid6: using ssse3x2 recovery algorithm
        07:58:10+02:00 Synology kernel: [    0.349297] ACPI: Executed 1 blocks of module-level executable AML code
        07:58:10+02:00 Synology umount: can't umount /initrd: Invalid argument
        07:58:10+02:00 Synology kernel: [    0.795763] ACPI: Enabled 2 GPEs in block 00 to 3F
        07:58:10+02:00 Synology kernel: [    4.302499] bounce pool size: 64 pages
        07:58:10+02:00 Synology kernel: [    4.315046] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
        07:58:10+02:00 Synology kernel: [    8.922004] ata7: limiting SATA link speed to 1.5 Gbps
        07:58:10+02:00 Synology kernel: [   10.952470] ata8: limiting SATA link speed to 1.5 Gbps
        07:58:10+02:00 Synology kernel: [   13.657788] pineview_synobios: module license 'Synology Inc.' taints kernel.
        07:58:10+02:00 Synology kernel: [   13.665042] Disabling lock debugging due to kernel taint
        07:58:10+02:00 Synology kernel: [   13.671402] 2018-10-8 5:58:2 UTC
        07:58:10+02:00 Synology kernel: [   13.678963] Brand: Synology
        07:58:10+02:00 Synology kernel: [   13.681809] Model: DS-1010+
        07:58:10+02:00 Synology kernel: [   13.684642] set group disks wakeup number to 5, spinup time deno 1
        07:58:10+02:00 Synology kernel: [   14.231480] synobios: unload
        07:58:10+02:00 Synology kernel: [   14.293311] md: invalid raid superblock magic on sda5
        07:58:10+02:00 Synology kernel: [   14.298378] md: sda5 does not have a valid v0.90 superblock, not importing!
        07:58:10+02:00 Synology kernel: [   14.343542] md: invalid raid superblock magic on sdb5
        07:58:10+02:00 Synology kernel: [   14.348610] md: sdb5 does not have a valid v0.90 superblock, not importing!
        07:58:10+02:00 Synology kernel: [   14.421316] md: invalid raid superblock magic on sdc5
        07:58:10+02:00 Synology kernel: [   14.426384] md: sdc5 does not have a valid v0.90 superblock, not importing!
        07:58:10+02:00 Synology kernel: [   14.480543] md: invalid raid superblock magic on sdd5
        07:58:10+02:00 Synology kernel: [   14.485603] md: sdd5 does not have a valid v0.90 superblock, not importing!
        07:58:10+02:00 Synology kernel: [   14.573768] md: invalid raid superblock magic on sde5
        07:58:10+02:00 Synology kernel: [   14.578830] md: sde5 does not have a valid v0.90 superblock, not importing!
        07:58:10+02:00 Synology kernel: [   14.600089] md: sda2 has different UUID to sda1
        07:58:10+02:00 Synology kernel: [   14.607881] md: sdb2 has different UUID to sda1
        07:58:10+02:00 Synology kernel: [   14.615672] md: sdc2 has different UUID to sda1
        07:58:10+02:00 Synology kernel: [   14.623453] md: sdd2 has different UUID to sda1
        07:58:10+02:00 Synology kernel: [   14.631246] md: sde2 has different UUID to sda1
        07:58:10+02:00 Synology s30_synocheckuser: s30_synocheckuser.c:383 The number of cron command fields is invalid! iNum=1
        07:58:10+02:00 Synology s30_synocheckuser: s30_synocheckuser.c:383 The number of cron command fields is invalid! iNum=1
        07:58:13+02:00 Synology s30_synocheckuser: SYSTEM:   Last message 's30_synocheckuser.c:' repeated 1 times, suppressed by syslog-ng on Synology
        07:58:13+02:00 Synology synoservice: synoservice.c:1575 pause gcpd due to require service cupsd runkey is stop
        07:58:13+02:00 Synology root: mkcert: Verifying certificate in [/usr/syno/etc/certificate/system/default].
        07:58:14+02:00 Synology [   26.196924] init: syno-auth-check main process (4892) killed by TERM signal
        07:58:14+02:00 Synology synonetd: net_if_is_link.c:40 Cannot get link status: No such device
        07:58:14+02:00 Synology synonetd: net_if_is_link.c:119 get link status failed on eth0
        07:58:15+02:00 Synology synonetd: net_if_is_link.c:40 Cannot get link status: No such device
        07:58:15+02:00 Synology synonetd: net_if_is_link.c:119 get link status failed on eth0
        07:58:17+02:00 Synology kernel: [   28.118915] 2018-10-8 5:58:17 UTC
        07:58:17+02:00 Synology kernel: [   28.126611] Brand: Synology
        07:58:17+02:00 Synology kernel: [   28.129523] Model: DS-1010+
        07:58:17+02:00 Synology kernel: [   28.132405] set group disks wakeup number to 5, spinup time deno 1
        07:58:22+02:00 Synology interface-catcher: eth0 (dhcp) is added
        07:58:22+02:00 Synology interface-catcher: eth1 (dhcp) is added
        07:58:22+02:00 Synology interface-catcher: lo (inet 127.0.0.1 netmask 255.0.0.0 ) is added
        07:58:23+02:00 Synology dhcp-client: started on eth0
        07:58:25+02:00 Synology dhcp-client: started on eth1
        07:58:25+02:00 Synology kernel: [   37.093378] md: md2: current auto_remap = 0
        07:58:25+02:00 Synology kernel: [   37.097682] md: md2: flushing inflight I/O
        07:58:26+02:00 Synology kernel: [   37.107718] md: resync of RAID array md2
        07:58:26+02:00 Synology spacetool.shared: spacetool.c:3088 [Info] Old vg path: [/dev/vg1000], New vg path: [/dev/vg1000], UUID: [cU8wIS-uckM-eUmu-rW07-nG21-fFyk-tUfDiy]
        07:58:26+02:00 Synology spacetool.shared: spacetool.c:3095 [Info] Activate all VG
        07:58:26+02:00 Synology spacetool.shared: spacetool.c:3106 Activate LVM [/dev/vg1000]
        07:58:26+02:00 Synology spacetool.shared: spacetool.c:3149 space: [/dev/vg1000]
        07:58:26+02:00 Synology spacetool.shared: spacetool.c:3175 space: [/dev/vg1000], ndisk: [5]
        07:58:27+02:00 Synology [   38.143177] init: dhcp-client (eth0) main process (8242) killed by TERM signal
        07:58:27+02:00 Synology dhcp-client: stopped on eth0
        07:58:27+02:00 Synology dhcp-client: started on eth0
        07:58:27+02:00 Synology spacetool.shared: hotspare_repair_config_set.c:36 Failed to hup synostoraged
        07:58:27+02:00 Synology synovspace: virtual_space_conf_check.c:78 [INFO] "PASS" checking configuration of virtual space [FCACHE], app: [1]
        07:58:27+02:00 Synology synovspace: virtual_space_conf_check.c:74 [INFO] No implementation, skip checking configuration of virtual space [HA]
        07:58:27+02:00 Synology synovspace: virtual_space_conf_check.c:74 [INFO] No implementation, skip checking configuration of virtual space [SNAPSHOT_ORG]
        07:58:27+02:00 Synology synovspace: vspace_wrapper_load_all.c:76 [INFO] No virtual layer above space: [/volume1] / [/dev/vg1000/lv]
        07:58:29+02:00 Synology dhcp-client: eth0 get new IP 172.16.0.200/24
        07:58:29+02:00 Synology synocheckhotspare: synocheckhotspare.c:149 [INFO] No hotspare config, skip hotspare config check. [0x2000 virtual_space_layer_get.c:98]
        07:58:31+02:00 Synology synocheckiscsitrg: iscsi_snapshot_repair.c:177 opendir(/volume1/@Snapshot) failed, err=No such file or directory
        07:58:32+02:00 Synology syno_hdd_util: Model:[ST2000DL003-9VT166], Firmware:[CC32], S/N:[5YD544N3] in [/dev/sde] is not ssd
        07:58:32+02:00 Synology syno_hdd_util: Model:[ST2000VN004-2E4164], Firmware:[SC60], S/N:[W524SLDS] in [/dev/sdd] is not ssd
        07:58:32+02:00 Synology syno_hdd_util: Model:[ST2000DL003-9VT166], Firmware:[CC32], S/N:[6YD0YDBQ] in [/dev/sdc] is not ssd
        07:58:32+02:00 Synology syno_hdd_util: Model:[ST32000542AS], Firmware:[CC34], S/N:[5XW0D3BQ] in [/dev/sdb] is not ssd
        07:58:32+02:00 Synology syno_hdd_util: Model:[ST2000DM001-1CH164], Firmware:[CC29], S/N:[Z1E7AGT3] in [/dev/sda] is not ssd
        07:58:32+02:00 Synology synobackupd: (9856) [err] command_server.cpp:341 add watch to [/usr/local/share/synobackup] failed
        07:58:32+02:00 Synology dhclient: eth0 emit network ready event
        07:58:32+02:00 Synology kernel: [   43.965951] sd 8:0:0:0: [synoboot] Asking for cache data failed
        07:58:32+02:00 Synology kernel: [   43.971951] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
        07:58:32+02:00 Synology kernel: [   43.981467] sd 8:0:0:0: [synoboot] Asking for cache data failed
        07:58:32+02:00 Synology kernel: [   43.987490] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
        07:58:32+02:00 Synology kernel: [   44.091744] sd 8:0:0:0: [synoboot] Asking for cache data failed
        07:58:32+02:00 Synology kernel: [   44.097765] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
        07:58:33+02:00 Synology dms: nginx_deploy.cpp:579 Failed to open share memory, No such file or directory
        07:58:33+02:00 Synology dms: nginx_deploy.cpp:579 Failed to open share memory, No such file or directory

        07:58:33+02:00 Synology dms: nginx_deploy.cpp:579 Failed to open share memory, No such file or directory
        07:58:34+02:00 Synology dms: SYSTEM: Last message 'nginx_deploy.cpp:579' repeated 4 times, suppressed by syslog-ng on Synology
        07:58:34+02:00 Synology manutild: manutild.c:2866 /.start_manutild not exist, finish manutild
        07:58:35+02:00 Synology root: mkcert: Verifying certificate in [/usr/syno/etc/certificate/system/default].
        07:58:36+02:00 Synology synoiscsiep: iscsi_start_all.cpp:96 Successfully started iSCSI service.
        07:58:37+02:00 Synology [   48.338429] init: iscsi_pluginserverd main process (11090) terminated with status 255
        07:58:37+02:00 Synology [   48.346650] init: iscsi_pluginserverd main process ended, respawning
        07:58:37+02:00 Synology [   48.551428] init: iscsi_pluginserverd main process (11141) terminated with status 255
        07:58:37+02:00 Synology [   48.560002] init: iscsi_pluginserverd main process ended, respawning
        07:58:48+02:00 Synology [   60.191923] init: smbd main process (11308) killed by TERM signal
        07:58:50+02:00 Synology synoiscsiep: iscsi_stop_all.cpp:110 Terminated all lunbackup processes.
        07:58:50+02:00 Synology synoiscsiep: iscsi_stop_all.cpp:162 Successfully stopped iSCSI service.
        07:58:50+02:00 Synology synocheckiscsitrg: iscsi_snapshot_repair.c:177 opendir(/volume1/@Snapshot) failed, err=No such file or directory
        07:58:54+02:00 Synology synocheckshare: synocheckshare_vol_unmount.c:147 Unmount Share [INTERNAL] [/dev/vg1000/lv] [/volume1]
        07:58:57+02:00 Synology umount: Kill the process "dms" with /volume1/@appstore/MediaServer/sbin/dms.
        07:58:57+02:00 Synology umount: Kill the process "lighttpd" with /volume1/@appstore/MediaServer/sbin/lighttpd.
        07:58:57+02:00 Synology umount: Kill the process "dms" with /volume1/@appstore/MediaServer/synovte.
        07:58:57+02:00 Synology umount: kill the process "dms" [pid = 10082] using /volume1/@appstore/MediaServer/sbin/dms
        07:58:58+02:00 Synology dhclient: eth1 emit network ready event
        07:58:59+02:00 Synology dnsdsm: Check failed. H
        07:58:59+02:00 Synology synousbdisk: RCClean succeeded
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1304 ##### ACTION:add
        07:59:01+02:00 Synology hotplugd: DEVNAME:sda
        07:59:01+02:00 Synology hotplugd: DEVGUID:Z1E7AGT30
        07:59:01+02:00 Synology hotplugd: DEVPATH:sda
        07:59:01+02:00 Synology hotplugd: SUBSYSTEM:block
        07:59:01+02:00 Synology hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1400 ==== SATA disk [sda] hotswap [add] ====
        07:59:01+02:00 Synology hotplugd: disk/smartctl_enable.c:99 open /dev/sda failed.
        07:59:01+02:00 Synology hotplugd: SmartFirmAndSerialRead(146) open device /dev/sda fail
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1418 SmartFirmAndSerialRead failed
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1421 ==== SATA disk [sda] Model: [ST2000DM001-1CH164      ] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1422 ==== SATA disk [sda] Serial number: [] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1423 ==== SATA disk [sda] Firmware version: [] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1304 ##### ACTION:add
        07:59:01+02:00 Synology hotplugd: DEVNAME:sdb
        07:59:01+02:00 Synology hotplugd: DEVGUID:5XW0D3BQ0
        07:59:01+02:00 Synology hotplugd: DEVPATH:sdb
        07:59:01+02:00 Synology hotplugd: SUBSYSTEM:block
        07:59:01+02:00 Synology hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1f.2/ata2/host1/target1:0:0/1:0:0:0
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1400 ==== SATA disk [sdb] hotswap [add] ====
        07:59:01+02:00 Synology hotplugd: disk/smartctl_enable.c:99 open /dev/sdb failed.
        07:59:01+02:00 Synology hotplugd: SmartFirmAndSerialRead(146) open device /dev/sdb fail
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1418 SmartFirmAndSerialRead failed
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1421 ==== SATA disk [sdb] Model: [ST32000542AS            ] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1422 ==== SATA disk [sdb] Serial number: [] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1423 ==== SATA disk [sdb] Firmware version: [] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1304 ##### ACTION:add
        07:59:01+02:00 Synology hotplugd: DEVNAME:sdc
        07:59:01+02:00 Synology hotplugd: DEVGUID:6YD0YDBQ0
        07:59:01+02:00 Synology hotplugd: DEVPATH:sdc
        07:59:01+02:00 Synology hotplugd: SUBSYSTEM:block
        07:59:01+02:00 Synology hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:0/2:0:0:0
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1400 ==== SATA disk [sdc] hotswap [add] ====
        07:59:01+02:00 Synology hotplugd: disk/smartctl_enable.c:99 open /dev/sdc failed.
        07:59:01+02:00 Synology hotplugd: SmartFirmAndSerialRead(146) open device /dev/sdc fail
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1418 SmartFirmAndSerialRead failed
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1421 ==== SATA disk [sdc] Model: [ST2000DL003-9VT166      ] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1422 ==== SATA disk [sdc] Serial number: [] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1423 ==== SATA disk [sdc] Firmware version: [] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1304 ##### ACTION:add
        07:59:01+02:00 Synology hotplugd: DEVNAME:sdd
        07:59:01+02:00 Synology hotplugd: DEVGUID:W524SLDS0
        07:59:01+02:00 Synology hotplugd: DEVPATH:sdd
        07:59:01+02:00 Synology hotplugd: SUBSYSTEM:block
        07:59:01+02:00 Synology hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1f.2/ata4/host3/target3:0:0/3:0:0:0
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1400 ==== SATA disk [sdd] hotswap [add] ====
        07:59:01+02:00 Synology hotplugd: disk/smartctl_enable.c:99 open /dev/sdd failed.
        07:59:01+02:00 Synology hotplugd: SmartFirmAndSerialRead(146) open device /dev/sdd fail
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1418 SmartFirmAndSerialRead failed
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1421 ==== SATA disk [sdd] Model: [ST2000VN004-2E4164      ] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1422 ==== SATA disk [sdd] Serial number: [] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1423 ==== SATA disk [sdd] Firmware version: [] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1304 ##### ACTION:add
        07:59:01+02:00 Synology hotplugd: DEVNAME:sde
        07:59:01+02:00 Synology hotplugd: DEVGUID:5YD544N30
        07:59:01+02:00 Synology hotplugd: DEVPATH:sde
        07:59:01+02:00 Synology hotplugd: SUBSYSTEM:block
        07:59:01+02:00 Synology hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1f.2/ata5/host4/target4:0:0/4:0:0:0
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1400 ==== SATA disk [sde] hotswap [add] ====
        07:59:01+02:00 Synology hotplugd: disk/smartctl_enable.c:99 open /dev/sde failed.
        07:59:01+02:00 Synology hotplugd: SmartFirmAndSerialRead(146) open device /dev/sde fail
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1418 SmartFirmAndSerialRead failed
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1421 ==== SATA disk [sde] Model: [ST2000DL003-9VT166      ] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1422 ==== SATA disk [sde] Serial number: [] ====
        07:59:01+02:00 Synology hotplugd: hotplugd.c:1423 ==== SATA disk [sde] Firmware version: [] ====
        07:59:02+02:00 Synology serv-bootup-timeout.sh: all service finish boot up.
        07:59:02+02:00 Synology synofstool: volume_fs_cache_dump.c:38 [Info] NO volume exists, skip generate fstab
        07:59:02+02:00 Synology root: == DSM 6.0 8754-0 finished boot up ==

        07:59:30+02:00 Synology sk: SmartDataRead(102) open device /dev/sda fail
        07:59:30+02:00 Synology sk: disk/disk_temperature_get.c:75 read value /dev/sda fail
        07:59:30+02:00 Synology sk: SmartDataRead(102) open device /dev/sdb fail
        07:59:30+02:00 Synology sk: disk/disk_temperature_get.c:75 read value /dev/sdb fail
        07:59:30+02:00 Synology sk: SmartDataRead(102) open device /dev/sdc fail
        07:59:30+02:00 Synology sk: disk/disk_temperature_get.c:75 read value /dev/sdc fail
        07:59:30+02:00 Synology sk: SmartDataRead(102) open device /dev/sdd fail
        07:59:30+02:00 Synology sk: disk/disk_temperature_get.c:75 read value /dev/sdd fail
        07:59:30+02:00 Synology sk: SmartDataRead(102) open device /dev/sde fail
        07:59:30+02:00 Synology sk: disk/disk_temperature_get.c:75 read value /dev/sde fail
        08:00:25+02:00 Synology kernel: [  157.147156] perf interrupt took too long (2519 > 5000), lowering kernel.perf_event_max_sample_rate to 50000
        08:00:30+02:00 Synology sk: SmartDataRead(102) open device /dev/sda fail
        08:00:30+02:00 Synology sk: disk/disk_temperature_get.c:75 read value /dev/sda fail
        08:00:30+02:00 Synology sk: SmartDataRead(102) open device /dev/sdb fail
        08:00:30+02:00 Synology sk: disk/disk_temperature_get.c:75 read value /dev/sdb fail

    • /var/log/scemd.log
      • 19:31:08+02:00 Synology syno_scemd_connector: scemd_connector/scemd_connector.c:133 Fail to sendto() for scemd connector client.
        19:31:09+02:00 Synology syno_scemd_connector: scemd_connector/scemd_connector.c:133 Fail to sendto() for scemd connector client.
        19:31:13+02:00 Synology syno_scemd_connector: scemd_connector/scemd_connector.c:133 Fail to sendto() for scemd connector client.
        19:31:15+02:00 Synology syno_scemd_connector: SYSTEM:    Last message 'scemd_connector/scem' repeated 2 times, suppressed by syslog-ng on Synology
        19:31:15+02:00 Synology scemd: event_handler.c:291 event handler thread 139921202009856 created
        19:31:15+02:00 Synology scemd: event_handler.c:98 Fail to sendto() for scemd event handler client.
        19:31:15+02:00 Synology scemd: show_module_type.c:35 fan_type=6, raid_type=1, led_type=3, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=0, fan_number=1, eunit_pwron_type=2, pis_type=0, rtc_type=3, lcm_type=2, wifi_wps_type=254
        19:31:16+02:00 Synology syno_scemd_connector: scemd_connector/scemd_connector.c:133 Fail to sendto() for scemd connector client.
        19:31:43+02:00 Synology scemd: fan_config_get.c:46 Type: INTERNAL Fan Mode: LOW
        19:31:43+02:00 Synology scemd: cpu_frequency_handler.c:75 glob cpu gover fail
        19:31:43+02:00 Synology scemd: manage_services.c:497 hw polling thread 139921185224448 created
        19:31:43+02:00 Synology scemd: manage_services.c:497 disk led ctrl thread 139921109022464 created
        19:31:43+02:00 Synology scemd: manage_services.c:497 scemd connector thread 139921100629760 created
        19:31:43+02:00 Synology scemd: scemd_connector.c:150 scemd connector thread start.
        19:31:43+02:00 Synology scemd: manage_services.c:497 led ctrl thread 139921092237056 created
        19:31:46+02:00 Synology scemd: SmartDataRead(102) open device /dev/sda fail
        19:31:46+02:00 Synology scemd: disk/disk_temperature_get.c:75 read value /dev/sda fail
        19:31:46+02:00 Synology scemd: SmartDataRead(102) open device /dev/sdb fail
        19:31:46+02:00 Synology scemd: disk/disk_temperature_get.c:75 read value /dev/sdb fail
        19:31:46+02:00 Synology scemd: SmartDataRead(102) open device /dev/sdc fail
        19:31:46+02:00 Synology scemd: disk/disk_temperature_get.c:75 read value /dev/sdc fail
        19:31:46+02:00 Synology scemd: SmartDataRead(102) open device /dev/sdd fail
        19:31:46+02:00 Synology scemd: disk/disk_temperature_get.c:75 read value /dev/sdd fail
        19:31:46+02:00 Synology scemd: SmartDataRead(102) open device /dev/sde fail
        19:31:46+02:00 Synology scemd: disk/disk_temperature_get.c:75 read value /dev/sde fail
        19:31:46+02:00 Synology scemd: SmartDataRead(102) open device /dev/sda fail
        19:31:46+02:00 Synology scemd: disk/disk_temperature_get.c:75 read value /dev/sda fail
        ...
        2018-10-07T19:31:47+02:00 Synology scemd: fan_config_get.c:46 Type: INTERNAL Fan Mode: LOW
        2018-10-07T19:31:47+02:00 Synology scemd: raid_sys_volume_check.c:164 MD0 active disks 5, designed disks 5
        2018-10-07T19:31:47+02:00 Synology scemd: raid_sys_volume_check.c:164 MD1 active disks 5, designed disks 5
        2018-10-07T19:31:47+02:00 Synology scemd: polling_hibernation_timer.c:1194 Hibernation enable, idle minutes 20
        ...
        2018-10-07T19:33:17+02:00 Synology scemd: manutild_ip_check.c:40 stop manutild.
        ...
        2018-10-07T19:53:58+02:00 Synology scemd: disk_xml.c:352 Error: Failed to get firmware and SN of /dev/sda
        2018-10-07T19:53:59+02:00 Synology scemd: fan_config_get.c:46 Type: INTERNAL Fan Mode: LOW
        2018-10-07T19:53:59+02:00 Synology scemd: fan/fan_table_type_disk_temperature_ops.c:69 Get temperature failed
        2018-10-07T19:53:59+02:00 Synology scemd: fan/fan_table_type_disk_temperature_ops.c:69 Get temperature failed
        2018-10-07T19:53:59+02:00 Synology scemd: fan/fan_table_type_disk_temperature_ops.c:69 Get temperature failed
        2018-10-07T19:53:59+02:00 Synology scemd: SYSTEM:   Last message 'fan/fan_table_type_d' repeated 4 times, suppressed by syslog-ng on Synology
        2018-10-07T19:53:59+02:00 Synology scemd: fan/fan_table_type_disk_temperature_ops.c:220 Invalid Disks temperature -1
        2018-10-07T19:53:59+02:00 Synology scemd: fan/fan_config_table_lookup.c:175  <disk_temperature> Temperature Get fail
        2018-10-07T19:53:59+02:00 Synology scemd: cpu_frequency_handler.c:75 glob cpu gover fail
        2018-10-07T19:54:03+02:00 Synology scemd: event_handler.c:291 event handler thread 139903537268480 created
        2018-10-07T19:54:03+02:00 Synology scemd: show_module_type.c:35 fan_type=6, raid_type=1, led_type=3, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=0, fan_number=1, eunit_pwron_type=2, pis_type=0, rtc_type=3, lcm_type=2, wifi_wps_type=254

 

Je pense que le problème vient clairement de la partie "scemd" qui ne semble pas pouvoir communiquer correctement et/ou récupérer les valeurs provenant de plusieurs sources.

Je vais peut être tenter le coup de récupérer des morceaux de l'ancien DSM (6.0) et les intégrer dans le 6.0.3 pour voir si il y a du mieux ... sinon je partirai dans une recherche comparative de tous les fichiers entre les 2 versions et avec un petit peu de chance je finirai par mettre le doigt sur le problème.

NB : Lors de la création des packages que j'ai donné à manger au Syno, j'ai volontairement laissé les fichiers /usr/syno/etc.defaults/scemd.xml intacts ... je n'aurais peut être pas dû finalement ? 🙂

 

Sinon, si vous avez des idées, je suis preneur ! 🙂

 

Merci d'avance

Lien vers le commentaire
Partager sur d’autres sites

  • 1 an après...

Hello,

Dans ce forum au post suivant:

Tu indiques au 26 Oct que pour finir tu as réussi a faire "digérer" du DSM 6.2.1 a ton DS1010+. Donc on peut considérer que ce post ci, ou tu indiques tout un paquet de problèmes est résolu?

Si c'est le cas, c'est sympa de passer le post en RESOLU. si non les gens s'y perde un peu.

Merci.

 

 

Lien vers le commentaire
Partager sur d’autres sites

Rejoindre la conversation

Vous pouvez publier maintenant et vous inscrire plus tard. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.

Invité
Répondre à ce sujet…

×   Collé en tant que texte enrichi.   Coller en tant que texte brut à la place

  Seulement 75 émoticônes maximum sont autorisées.

×   Votre lien a été automatiquement intégré.   Afficher plutôt comme un lien

×   Votre contenu précédent a été rétabli.   Vider l’éditeur

×   Vous ne pouvez pas directement coller des images. Envoyez-les depuis votre ordinateur ou insérez-les depuis une URL.

×
×
  • Créer...

Information importante

Nous avons placé des cookies sur votre appareil pour aider à améliorer ce site. Vous pouvez choisir d’ajuster vos paramètres de cookie, sinon nous supposerons que vous êtes d’accord pour continuer.