Balooforever Posté(e) le 2 février 2019 Partager Posté(e) le 2 février 2019 Version: 1.2.1-7779 (2019-01-29) Important Note The update is expected to be available for all regions within the next few weeks, although the time of release in each region may vary slightly. What's New Added support for displaying the device name of offline devices. Added support for the option to appoint Ethernet as uplink connection for Wi-Fi points. Added support for Control Panel > Upgrade & Restore page to display the established Wi-Fi system. Added support for the option to enable/disable generating Firewall rules automatically when setting up Port Forwarding, DMZ, and UPnP. Enhanced speed for DS-Lite. Enhanced DHCP compatibility for specific ISPs. Fixed Issues Fixed an issue where Safe Access might fail to block websites when DNS server is in the local network. Fixed an issue where RT2600ac might fail to recognize certain USB devices when the option to "Downgrade USB3.0 device to reduce interference to 2.4GHz signal" is enabled. Fixed an issue where the LED indicators and the Wi-Fi status might not work properly together on RT2600ac. Fixed an issue where SRM might not work properly when the network is connected to certain PPTP servers. Fixed an issue where SRM might not be able to access the Internet when IPv6 server is in the local network, or when the network has been connected via IPv6 for a period of time. Fixed an issue where the hit count of first rules in Firewall might not update. Fixed an issue where SRM might not work properly when the network is connected via certain 4G LTE dongles. Fixed an issue where SRM might not be able to resolve subnet conflicts properly during bootup. Fixed an issue where SRM might erase UPnP rules during the boot-up process. Fixed an issue where QoS might not be able to work properly when a VPN Plus client is connected, or when IPTV is enabled. Fixed an issue where SRM might fail to communicate with a device that is connected to a local network via a switch. Fixed an issue where Guest Network might not be able to work properly under bridge mode on RT1900ac. Fixed an issue where Firewall might not allow configuration when the option to "Generate firewall rules automatically" is not enabled for Port Forwarding and UPnP. Fixed an issue where SRM might not be able to work properly when the network is connected via iPhone tethering. Fixed an issue where Wi-Fi points might not be able to turn off LED indicators when an Ethernet backhaul connection is set up. Fixed an issue where IPTV might not be able to work properly when IGMP Proxy is enabled. Fixed an issue where Password Rotation might not be able to work properly with WPA3-Personal. Fixed an issue where SRM might prematurely show an upgrade as complete. Fixed an issue where SRM might not display the correct time. Fixed an issue where PPPoE might not be able to re-establish the connection once it has disconnected. Fixed an issue where Wi-Fi Connect might not correct display IP address of device which is connected to the Guest Network when the Synology router is under bridge mode,. Security Updates Fixed a security vulnerability regarding Linux kernel (CVE-2017-13168). Fixed a security vulnerability regarding SQLite (CVE-2018-20346). Known Issues and Limitations Press "Repair" in the Package Center after manually updating might cause Packages not to work or be removed. Please download package from Synology website and manually install it. Lien vers le commentaire Partager sur d’autres sites More sharing options...
unPixel Posté(e) le 2 février 2019 Partager Posté(e) le 2 février 2019 Installée depuis quelques jours mais merci pour l'info 😉 Lien vers le commentaire Partager sur d’autres sites More sharing options...
pikeupe Posté(e) le 3 février 2019 Partager Posté(e) le 3 février 2019 slt merci Lien vers le commentaire Partager sur d’autres sites More sharing options...
Tostos94 Posté(e) le 4 février 2019 Partager Posté(e) le 4 février 2019 Merci pour l'information Lien vers le commentaire Partager sur d’autres sites More sharing options...
Einsteinium Posté(e) le 10 février 2019 Partager Posté(e) le 10 février 2019 Y a que chez ou par fois la vue des appareils connectés part en sucette et sa joue la guirlande aussi bien en lan que wifi ? Lien vers le commentaire Partager sur d’autres sites More sharing options...
unPixel Posté(e) le 10 février 2019 Partager Posté(e) le 10 février 2019 Je sais pas, j'ai pas le nez sur l'interface du routeur très souvent. J'essaierai d'aller voir. Lien vers le commentaire Partager sur d’autres sites More sharing options...
Tostos94 Posté(e) le 13 février 2019 Partager Posté(e) le 13 février 2019 j'ai pas de souci depuis la mise à jour au niveau guirlande 😋 Lien vers le commentaire Partager sur d’autres sites More sharing options...
unPixel Posté(e) le 13 février 2019 Partager Posté(e) le 13 février 2019 Moi j'en suis satisfait car elle m'a permit de virer le modem SFR ce qui fait que j'ai pu enfin relier uniquement l'ONT SFR à mon routeur. Avant, il y avait un soucis de bail avec des coupures internet toutes les 5 minutes 🤔 Lien vers le commentaire Partager sur d’autres sites More sharing options...
Tostos94 Posté(e) le 14 février 2019 Partager Posté(e) le 14 février 2019 hier j'ai eu un bug pendant 4 heures je ne pouvait plus accéder à l'interface de mon routeur Lien vers le commentaire Partager sur d’autres sites More sharing options...
unPixel Posté(e) le 14 février 2019 Partager Posté(e) le 14 février 2019 Et c'était quoi le message d'erreur ? Lien vers le commentaire Partager sur d’autres sites More sharing options...
Tostos94 Posté(e) le 14 février 2019 Partager Posté(e) le 14 février 2019 le message classique , Veuillez vérifier les paramètres suivants. -Vous avez saisi le QuickConnect ID correct. -www est sous tension et connecté à Internet. -Le service de relais QuickConnect est activé pour www (dans Panneau de configuration > QuickConnect > Avancé > Options). au bout de 4 heures sans aucun reboot du routeur j'ai retrouvé l'accès. Pendant le laps de temps j'avais bien ma connexion à domicile qui fonctionnait car je pouvais depuis l’extérieur accéder à mes caméras Lien vers le commentaire Partager sur d’autres sites More sharing options...
unPixel Posté(e) le 15 février 2019 Partager Posté(e) le 15 février 2019 Donc c'était certainement un soucis avec Quickconnect. Quand on vous conseille de passer par votre propre domaine 😧 Lien vers le commentaire Partager sur d’autres sites More sharing options...
Tostos94 Posté(e) le 18 février 2019 Partager Posté(e) le 18 février 2019 oui j'ai fait le nécessaire depuis je pensais pas que l'on aurait des problèmes de se type. Lien vers le commentaire Partager sur d’autres sites More sharing options...
Messages recommandés
Archivé
Ce sujet est désormais archivé et ne peut plus recevoir de nouvelles réponses.