kfar
-
Compteur de contenus
28 -
Inscription
-
Dernière visite
Messages posté(e)s par kfar
-
-
Bonjour
0 -
Up
Personne a une idée ???
Edit : Je réussi a résoudre une parti de mon problème c'est à dire le lancement au demarrage du syno !! Maintenant ca fonctionne super bien !! Il me reste plus qu'à touver c'est quoi ce problème de luminosité.
0 -
Bonjour
0 -
C'est surement du
0 -
j ai un probleme pour mettre le script au demarrage car apres la webcam apparait en deconnecter !!! est ce que quelqu un peut m aider ??? merci d avance
0 -
bon alors moi je dis chapeau bas a sp@ro car j ai reussi a me d
0 -
Sp@ro tu m'a oubli
0 -
C'est possible mais lors de ton test avec un live cd c'
0 -
j'attends de tes nouvelles !!!
0 -
Super merci beaucoup
0 -
salut
Alors voila ou j'en suis :
J'ai installer le bootstrap et pour le faire j'ai suivi ce tuto (http://syno.haeflinger.com/index.php/DS110J) tout c'est bien passer !!! puis j'ai modifier /etc/profile
ensuite
J'ai installer le paquet openssh-sftp-server (ipkg install openssh-sftp-server) tout c'est bien passer aussi
J'ai modifier /etc/passwd
mais j'ai toujours l'erreur : "error looking up user group - Command 'groups' failed with return code 127 and error message -ash: groups: not found." avec winscp
quelqu'un aurait une idée ???
Y a t il une commande pour lancer openssh-sftp-server ??
0 -
j'ai lu sur un forum qu'il fallait ov518.ko enfin je ne sais pas mais j'
0 -
et bien l
0 -
ok je vais suivre ce tuto http://syno.haeflinger.com/index.php/DS110J mais ma question est de savoir si ce fichier (http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/stable/syno-mvkw-bootstrap_1.2-7_arm.xsh) est il compatible avec mon mat
0 -
C'est fou normalement c'est bien le ov511.ko qu'il te faut !!!!
As tu eux une erreur lors du chargement ???
As tu bien brancher ta webcam seulement apr
0 -
- installer le bootstrap correspondant au modèle
Ou puis je le trouver ??? et comment ca s'intall ???
- se connecter en telnet ou ssh avec le compte root + mdp d'adminCa je crois que je peux le faire !!
- installer le paquet openssh-sftp-server (ipkg install openssh-sftp-server)ok
- modifier le fichier /etc/passwd et mettre un shell valide aux utilisateurs désirés (remplacer le dernier champ, mettre la même chose que rootCa me parait un peu compliqué mais à quoi ressemble le dernier champ (histoire que je ne modifie pas n'importe quoi)
Encore merci pour votre aide
0 -
salut
0 -
salut
Voila le retour de la commande dmesg sous ubuntu live cd
Linux video capture interface: v2.00 [ 94.157017] ov511: USB OV518 video device found [ 94.158083] ov511: Device revision 1 [ 94.170074] ov511: Compression required with OV518...enabling [ 95.540159] ov511: Sensor is an OV6630AF [ 95.743241] ov511: Device at usb-0000:00:1a.0-1 registered to minor 0 [ 95.743282] usbcore: registered new interface driver ov511 [ 95.743287] ov511: v1.64 for Linux 2.5 : ov511 USB Camera Driver
0 -
ok je vois ca demain avec un live cd ubuntu !!!
0 -
Merci
voici le retour des commande demandées :
lsmod :
Module Size Used by Tainted: P ov511 69192 0 pwc 80708 0 v4l2_common 16832 0 videodev 37824 3 ov511,pwc,v4l2_common v4l1_compat 14404 1 videodev usbhid 26628 0 hid 32004 1 usbhid usblp 11808 0 usb_storage 37056 0 uhci_hcd 20812 0 ohci_hcd 18116 0 ehci_hcd 33516 0 xt_state 1952 1 xt_tcpudp 2880 0 xt_multiport 2976 1 ipt_REDIRECT 1632 0 iptable_nat 5316 0 nf_nat 14934 2 ipt_REDIRECT,iptable_nat nf_conntrack_ipv4 7748 3 iptable_nat nf_conntrack 49064 4 xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4 iptable_filter 2208 1 ip_tables 10216 2 iptable_nat,iptable_filter x_tables 11204 6 xt_state,xt_tcpudp,xt_multiport,ipt_REDIRECT,iptable_nat,ip_tables ds110j_synobios 19448 0 ecryptfs 95956 0 isofs 32360 0 udf 86924 0 zlib_inflate 14912 1 isofs fuse 46772 0 nfsd 90628 1 exportfs 3616 1 nfsd ppp_async 8992 0 crc_ccitt 1696 1 ppp_async ppp_generic 18900 1 ppp_async slhc 5632 1 ppp_generic snd_pcm_oss 38432 0 snd_mixer_oss 15072 1 snd_pcm_oss snd_usb_audio 81796 0 snd_pcm 66148 2 snd_pcm_oss,snd_usb_audio snd_timer 19268 1 snd_pcm snd_hwdep 6980 1 snd_usb_audio snd_usb_lib 16672 1 snd_usb_audio snd_rawmidi 20160 1 snd_usb_lib snd_seq_device 6796 1 snd_rawmidi snd 46392 9 snd_pcm_oss,snd_mixer_oss,snd_usb_audio,snd_pcm,snd_timer,snd_hwdep,snd_usb_lib,snd_rawmidi,snd_seq_device snd_page_alloc 7272 1 snd_pcm soundcore 5860 1 snd quota_v2 8832 2 usbcore 120468 11 ov511,pwc,usbhid,usblp,usb_storage,uhci_hcd,ohci_hcd,ehci_hcd,snd_usb_audio,snd_usb_lib sg 27296 0 ntfs 98788 0 vfat 10304 0 fat 47132 1 vfat appletalk 29868 20 psnap 2916 1 appletalk llc 5716 1 psnap
dmesg :usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Linux video capture interface: v2.00 pwc: Philips webcam module version 10.0.13 loaded. pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. usbcore: registered new interface driver Philips webcam findhostd uses obsolete (PF_INET,SOCK_PACKET) eth0: link down eth0: link up, full duplex, speed 100 Mbps eth0: link down eth0: link up, full duplex, speed 100 Mbps usb 1-1.2: USB disconnect, address 3 usbcore: registered new interface driver ov511 ov511: v1.64 for Linux 2.5:ov511 USB Camera Driver usb 1-1.1: new full speed USB device using ehci_marvell and address 4 usb 1-1.1: configuration #1 chosen from 1 choice Got empty serial number. Generate serial number from product.
J'attends tes instruction Sp@ro
0 -
AHAH !!!
Me suis tromp
0 -
lsmod
Module Size Used by Tainted: P pwc 80708 0 v4l2_common 16832 0 videodev 37824 2 pwc,v4l2_common v4l1_compat 14404 1 videodev usbhid 26628 0 hid 32004 1 usbhid usblp 11808 0 usb_storage 37056 0 uhci_hcd 20812 0 ohci_hcd 18116 0 ehci_hcd 33516 0 xt_state 1952 1 xt_tcpudp 2880 0 xt_multiport 2976 1 ipt_REDIRECT 1632 0 iptable_nat 5316 0 nf_nat 14934 2 ipt_REDIRECT,iptable_nat nf_conntrack_ipv4 7748 3 iptable_nat nf_conntrack 49064 4 xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4 iptable_filter 2208 1 ip_tables 10216 2 iptable_nat,iptable_filter x_tables 11204 6 xt_state,xt_tcpudp,xt_multiport,ipt_REDIRECT,iptable_nat,ip_tables ds110j_synobios 19448 0 ecryptfs 95956 0 isofs 32360 0 udf 86924 0 zlib_inflate 14912 1 isofs fuse 46772 0 nfsd 90628 1 exportfs 3616 1 nfsd ppp_async 8992 0 crc_ccitt 1696 1 ppp_async ppp_generic 18900 1 ppp_async slhc 5632 1 ppp_generic snd_pcm_oss 38432 0 snd_mixer_oss 15072 1 snd_pcm_oss snd_usb_audio 81796 0 snd_pcm 66148 2 snd_pcm_oss,snd_usb_audio snd_timer 19268 1 snd_pcm snd_hwdep 6980 1 snd_usb_audio snd_usb_lib 16672 1 snd_usb_audio snd_rawmidi 20160 1 snd_usb_lib snd_seq_device 6796 1 snd_rawmidi snd 46392 9 snd_pcm_oss,snd_mixer_oss,snd_usb_audio,snd_pcm,snd_timer,snd_hwdep,snd_usb_lib,snd_rawmidi,snd_seq_device snd_page_alloc 7272 1 snd_pcm soundcore 5860 1 snd quota_v2 8832 2 usbcore 120468 10 pwc,usbhid,usblp,usb_storage,uhci_hcd,ohci_hcd,ehci_hcd,snd_usb_audio,snd_usb_lib sg 27296 0 ntfs 98788 0 vfat 10304 0 fat 47132 1 vfat appletalk 29868 20 psnap 2916 1 appletalk llc 5716 1 psnap
j'ai d
0 -
salut Sp@ro
Et merci pour ton aide !! Voici le retour des dmesg :
ize 4MB BOOT_ROM_CS ....no such DEV_BOOTCS ....no such CRYPT_ENG ....base f0000000, size 2MB Detected Tclk 200000000 and SysClk 400000000 MV Buttons Device Load Marvell USB EHCI Host controller #0: c7c37200 PCI: bus0: Fast back to back transfers enabled SCSI subsystem initialized libata version 3.00 loaded. NET: Registered protocol family 2 Time: kw_clocksource clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 4096K Use the XOR engines (acceleration) for enhancing the following functions: o RAID 5 Xor calculation o kernel memcpy o kenrel memzero Number of XOR engines to use: 4 cesadev_init(c001185c) mvCesaInit: sessions=10240, queue=64, pSram=f0000000 MV Buttons Driver Load VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) async_tx: api initialized (sync-only) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.5 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize loop: module loaded Load Marvell Ethernet Driver o Cached descriptors in DRAM o DRAM SW cache-coherency o Single RX Queue support - ETH_DEF_RXQ=0 o Single TX Queue support - ETH_DEF_TXQ=0 o TCP segmentation offload enabled o Receive checksum offload enabled o Transmit checksum offload enabled o Rx descripors: q0=128 o Tx descripors: q0=532 o Loading network interface: eth0 Driver 'sd' needs updating - please use bus_type methods Integrated Sata device found scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter scsi 0:0:0:0: Direct-Access Hitachi HDP725050GLA360 GM4O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk physmap platform flash device: 00400000 at f8000000 SPI Serial flash detected @ 0xf8000000, 4096KB (64sec x 64KB) Searching for RedBoot partition table in SYNOMTD-0 at offset 0x3f0000 6 RedBoot partitions found on MTD device SYNOMTD-0 SYNOMTD flash bank 0: Using RedBoot partition definition Creating 6 MTD partitions on "SYNOMTD-0": 0x00000000-0x00080000 : "RedBoot" 0x00080000-0x00280000 : "zImage" 0x00280000-0x003c0000 : "rd.gz" 0x003c0000-0x003d0000 : "vendor" vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0. Serial Number: A4G8N00037 0x003d0000-0x003f0000 : "RedBoot Config" 0x003f0000-0x00400000 : "FIS directory" md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int32x1 73 MB/s raid6: int32x2 MB/s raid6: int32x4 83 MB/s raid6: int32x8 74 MB/s raid6: using algorithm int32x4 (83 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com dm_crypt using the OCF package. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). ds110j_synobios: module license 'Synology Inc.' taints kernel. synobios: load, major number 201 Brand: Synology Model: DS-110j synobios: unload kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem). Trying to move old root to /initrd ... okay Freeing init memory: 116K Adding 2097136k swap on /dev/hda2. Priority:-1 extents:1 across:2097136k NET: Registered protocol family 5 NTFS driver 2.1.29 [Flags: R/O MODULE]. sd 0:0:0:0: Attached scsi generic sg0 type 0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver snd-usb-audio PPP generic driver version 2.4.2 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.9) encryptfs using the OCF package. synobios: load, major number 201 Brand: Synology Model: DS-110j eth0: mac address changed eth0: started eth0: link down eth0: link up, full duplex, speed 100 Mbps kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with writeback data mode. ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (2048 buckets, 8192 max) ehci_marvell ehci_marvell.70059: Marvell Orion EHCI ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 usb 1-1: new high speed USB device using ehci_marvell and address 2 Initializing USB Mass Storage driver... usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected Got empty serial number. Generate serial number from product. usb 1-1.1: new full speed USB device using ehci_marvell and address 3 usb 1-1.1: configuration #1 chosen from 1 choice Got empty serial number. Generate serial number from product. usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usblp usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Linux video capture interface: v2.00 pwc: Philips webcam module version 10.0.13 loaded. pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. usbcore: registered new interface driver Philips webcam findhostd uses obsolete (PF_INET,SOCK_PACKET)
/dev/video0 existe bien avec rw-r--r-- comme permission !!
@++
0 -
Salut
Merci au modo qui a validé le pwc.ko
J'ai suivi ton tuto à la lettre mais tout ce passe super bien jusqu'à la dernière commande
./mjpg_streamer -i "input_uvc.so" -o "output_http.so -w ./www -p 8099 -c utilisateur:motdepasse" MJPG Streamer Version.: 2.0 ERROR: could not find input plugin Perhaps you want to adjust the search path with: # export LD_LIBRARY_PATH=/path/to/plugin/folder dlopen: input_uvc.so: cannot open shared object file: No such file or directory
Celle là j'ai reussi à corriger en relisant le topic cependant j'ai encore une erreur sur la dernière commande :./mjpg_streamer -i "/volume1/public/USB_Webcam/mjpg-streamer/input_uvc.so" -o "/volume1/public/USB_Webcam/mjpg-streamer/output_http.so -w ./www -p 8099 -c yyy:zzzz" MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 5 i: Format............: MJPEG ERROR opening V4L interface: No such device or address Init v4L2 failed !! exit fatal i: init_VideoIn failed
Est ce que vous pouvez m'aider ??
0
Installer Serveur Xmpp/jabber
dans Modifications Logiciels
Posté(e)
Salut !!
As tu réussi l'install de ton serveur Xmpp ??? Je voulais installer la meme chose mais j'ai trouver ca trop compliquer.
@+