This site uses cookies! Learn More

Ce site utilise des cookies !

En continuant à utiliser ce site, vous vous engagez à nous permettre de stocker des cookies sur votre ordinateur.

 

Si nous utilisons des cookies et retenons des données anonymes, c’est pour nous aider à mieux gérer notre mesure d’audience, aider nos partenaires commerciaux à nous rémunérer et nos partenaires publicitaires à proposer des annonces qui vous correspondent.

 

Grâce à ces cookies, le forum est en mesure de savoir qui écrit un message et utile pour le système d'authentification.

 

En cliquant sur « J'accepte », vous acceptez l'utilisation par NAS-Forum de cookies publicitaires et de mesure d'audience fine.

cocolabombe0

Membres
  • Compteur de contenus

    59
  • Inscription

  • Dernière visite

À propos de cocolabombe0

  • Rang
    Novice Syno
  • Date de naissance 14/06/1991

Profile Information

  • Gender
    Male

Visiteurs récents du profil

1 142 visualisations du profil
  1. Voila mes données Cette ligne a un affaiblissement de 11,19 dB lié à la distance de 941 mètres qui la sépare du central de ... . Elle est composée d'une portion de 941 mètres de câble de cuivre (0,6 mm) . Fait sans TV Orange http://www.speedtest.net/my-result/5061965907
  2. Ma configuration actuelle: Livebox: 192.168.1.1 Liveplay: 192.168.1.13 Asus: 192.168.1.14 WAN / Lan 192.168.2.1 Tous mes adresses ip sont en 192.168.2.x avec les ip fixe. Livebox, j'ai mis DMZ 192.168.1.14 Donc je pense que c'est exactement ce que tu me dis plus haut. Idem un truc que j'ai du mal à comprendre, c'est comment mettre plex vers l'extérieur. Règle dans le routeur (déclencheur de port, redirection de port, DMZ, etc), Le DMZ sur le routeur est désactivé. J'ai encore beaucoup de travail si je dois refaire tous mes ips surtout qu'il y en a pleins de fixe comme mes deux nas dans les deux sens (routeur et nas).
  3. j'ai les mêmes valeurs avec tv eteint et allumer. tv eteint: http://www.speedtest.net/my-result/5046219654 tv allumer: http://www.speedtest.net/my-result/5046228097 Je vais essayé de rebooter la livebox pour voir. J'ai un meilleur débit mais pas terrible pour la VDSL je trouve Je peux dire que j'ai déjà eu plus mais bon je sais que mon installation n'est pas optimale. Je crois que les prises sont en dérivation et non en étoile sur l'arrivé de la ligne. Je n'ai pas le boitier DTI donc je ne peux pas tester. Et je suis derrière un routeur asus qui lui est devant ma livebox.
  4. Et j'ai une dernière question. J'ai juste verifier en local mais quand je vais sur xxx.synology.me me renvoie sur ma livebox? On ne peux me renvoyé comme quickconnect sur mon nas? Le quickconnect en local me renvoie bien sur mon nas mais sur le lan 3. Peut importe vu que j'ai quand même accès.
  5. Ok donc dans DMZ livebox, je m'ai mon adresse lan 1 192.168.2.xx C'est bien ça? Ou je dois mettre l'adresse 192.168.1.xx du routeur?
  6. Il y a juste le DMZ qui reste à faire alors. Je croyais qu'il était à éviter. Si je le fais, que va m'apporter en plus le DMZ? Ok pour la dernière question.
  7. Je suis en vdsl2 aussi. J'ai la livebox play et derrière le Asus-AC68U. Lors du test, j'avais la tv orange mise sur une chaine de canal+. Je trouve que ca fait pas beaucoup pour une fois. J'ai déjà eu plus. Donc c'est possible de supprimer la livebox pour juste le routeur asus? Tout en conservant la TV et le téléphone? Sans TV orange allumé livebox: asus: Livebox Etat de la ligne DSL 2.1 statut du lien DSL actif 2.2 mode de synchronisation DSL VDSL 2.3 dernière synchronisation DSL 14 janvier 2016, 03 h 03 m 2.4 durée de la synchronisation DSL 16 j 18 h 46 m 59 s Débit et marge au bruit 2.5 débit de synchronisation DSL montante 880 Kb/s 2.6 débit de synchronisation DSL descendante 17976 Kb/s 2.7 marge de bruit liaison descendante 9.1 dB Indicateur de qualité de la ligne (erreurs) 2.8 secondes erronées du sens descendant (depuis la dernière synchronisation) 38 2.9 secondes gravement erronées du sens descendant (depuis la dernière synchronisation) 25
  8. Bonsoir, j'ai des problèmes sur l'environnement réseau quand je fais le test avec EZ-internet. J'ai une livebox et un routeur Asus RT-AC68U. Mon nas est un DS1513+. J'ai lu que l'on ne pouvais pas mettre la livebox play en bridge. Comment faire pour que tout soit redirigé (bien configuré) vers le routeur Asus. Est ce possible sinon de brancher les deux passerelles (192.168.1.x de Orange et 192.168.2.x de Asus) sur le NAS. Comme ça, en plus, j'aurais accès à mon nas sur les deux réseaux? J'ai quasi rien de branché sur ma livebox (juste 2 périphérique pas encore mis sur le routeur asus) et bien sur la TV. Je pense que je vais supprimer la couverture wifi de la livebox après. Comme ça, je serais sur même si je préfère la laisser, on ne sais jamais. J'espère que vous pourrez m'aider? Cordialement Nicolas.
  9. Je l'ai branché direct sur le pc. Même problème. J'ai redémarré le synology et tout refonctionne. J'ai supprimé mon volume des 5 disques, retirer les deux en trop et refait un volume en SHR 1 disque
  10. Je vais essayer demain mais c'est pas pratique.
  11. Du logiciel Assistant . Erreur La Configuration rapide ne s'est pas terminée en raison d'une perte de connexion. Fermez le dialogue et réessayez ultérieusement. Je n'ai plus accès au DSM. Je pense que cela peut venir de mon routeur (aucune règle de créée car je ne sais pas comment les faires). En faite, j'ai: Livebox (192.168.1.1) -> Décodeur Orange -> Routeur Asus (RT-AC68U) -> Téléphone par internet Sur le routeur, il y a tous mes périphérique TV, ordi, Hub, switch, box domotique, etc. Tout ce qu'il y a le réseau internet. J'ai pris toutes les adresses attribué en DHCP vers une adresse Fixe. J'avais essayé en désactivant le DHCP Orange et le wifi mais ça ne suffit pas.
  12. Je n'arrive pas à configurer depuis le logiciel. J'ai essayé en manuel et en DHCP mais erreur de configuration.
  13. C'est une bonne nouvelle pour mes disques?
  14. DiskStation> smartctl -d sat -a /dev/sda smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAK9U6US LU WWN Device Id: 5 000cca 22beebc86 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Dec 31 11:35:30 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 575) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 82 3 Spin_Up_Time 0x0007 141 141 024 Pre-fail Always - 527 (Average 565) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 149 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17229 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 34 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 821 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 821 194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 21/55) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17226 - # 2 Extended offline Completed without error 00% 17207 - # 3 Short offline Completed without error 00% 11750 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdb smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAK9WGTS LU WWN Device Id: 5 000cca 22beec4ff Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Dec 31 11:39:18 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 560) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 78 3 Spin_Up_Time 0x0007 137 137 024 Pre-fail Always - 532 (Average 595) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 153 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17229 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 39 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 831 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 831 194 Temperature_Celsius 0x0002 133 133 000 Old_age Always - 45 (Min/Max 19/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17225 - # 2 Short offline Completed without error 00% 17145 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdc smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK2301PAK3162T LU WWN Device Id: 5 000cca 22beba81d Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Dec 31 11:39:20 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 566) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 82 3 Spin_Up_Time 0x0007 139 139 024 Pre-fail Always - 538 (Average 575) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 149 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 35 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17227 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 35 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 825 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 825 194 Temperature_Celsius 0x0002 139 139 000 Old_age Always - 43 (Min/Max 20/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17224 - # 2 Short offline Completed without error 00% 17144 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdd smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1301PAKNWLJS LU WWN Device Id: 5 000cca 22bf3c588 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Dec 31 11:39:21 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 559) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 77 3 Spin_Up_Time 0x0007 134 134 024 Pre-fail Always - 549 (Average 603) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 147 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17230 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 33 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 822 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 822 194 Temperature_Celsius 0x0002 139 139 000 Old_age Always - 43 (Min/Max 21/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17226 - # 2 Short offline Completed without error 00% 17146 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sde smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAKA5V3S LU WWN Device Id: 5 000cca 22beee827 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Dec 31 11:39:34 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 568) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 78 3 Spin_Up_Time 0x0007 138 138 024 Pre-fail Always - 517 (Average 601) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 151 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 35 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17229 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 36 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 825 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 825 194 Temperature_Celsius 0x0002 146 146 000 Old_age Always - 41 (Min/Max 15/55) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17225 - # 2 Short offline Completed without error 00% 17145 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Test doit être terminé. Aucun erreur je crois.