cocolabombe0

Bonsoir, en faite; je m'étais assuré de vidé les identifiants enregistré. Mais là, je me suis dis pourquoi ne pas en enregistré manuellement et ça a fonctionné. Donc j'ai pu reprendre normalement avec ce nom.

Bonjour, j'ai eu un soucis avec mon Synology DS1513+ suite à un conteneur docker qui me flingue mon stockage. J'ai donc tout réinitialisé et passé de DSM 6 à DSM 7.1 Celà fait pas mal de différence mais bon, faut bien avancer. J'ai un soucis pour me connecter avec mon Hostname. En \\ip_local pas de soucis. J'ai testé sur 2 utilisateurs. Quand je me connecte en \\Diskstation visible sur Services de fichiers -> SMB c'est bien cette adresse de marqué. Lorsque j'essaie de m'y connecter, j'ai toujours ce message. Pourtant le mot de passe est bien correct et j'ai bien les permissions sur tout (2 Administrateurs). Sur la découverte de réseau, j'ai bien le Diskstation qui est présent. J'arrive donc à mettre l'adresse local du syno et je m'y connecte pourtant il est pas présent dans la liste des réseaux. J'ai bien SMBv2 sur mon pc windows. Je n'ai rien changé entre le DSM6 et le DSM 7 sur mon pc. Je pense qu'il y a encore un paramètre que je n'ai pas vu qui est à faire sur le synology. Merci d'avance.

Voila mes données Cette ligne a un affaiblissement de 11,19 dB lié à la distance de 941 mètres qui la sépare du central de ... . Elle est composée d'une portion de 941 mètres de câble de cuivre (0,6 mm) . Fait sans TV Orange http://www.speedtest.net/my-result/5061965907

Ma configuration actuelle: Livebox: 192.168.1.1 Liveplay: 192.168.1.13 Asus: 192.168.1.14 WAN / Lan 192.168.2.1 Tous mes adresses ip sont en 192.168.2.x avec les ip fixe. Livebox, j'ai mis DMZ 192.168.1.14 Donc je pense que c'est exactement ce que tu me dis plus haut. Idem un truc que j'ai du mal à comprendre, c'est comment mettre plex vers l'extérieur. Règle dans le routeur (déclencheur de port, redirection de port, DMZ, etc), Le DMZ sur le routeur est désactivé. J'ai encore beaucoup de travail si je dois refaire tous mes ips surtout qu'il y en a pleins de fixe comme mes deux nas dans les deux sens (routeur et nas).

j'ai les mêmes valeurs avec tv eteint et allumer. tv eteint: http://www.speedtest.net/my-result/5046219654 tv allumer: http://www.speedtest.net/my-result/5046228097 Je vais essayé de rebooter la livebox pour voir. J'ai un meilleur débit mais pas terrible pour la VDSL je trouve Je peux dire que j'ai déjà eu plus mais bon je sais que mon installation n'est pas optimale. Je crois que les prises sont en dérivation et non en étoile sur l'arrivé de la ligne. Je n'ai pas le boitier DTI donc je ne peux pas tester. Et je suis derrière un routeur asus qui lui est devant ma livebox.

Et j'ai une dernière question. J'ai juste verifier en local mais quand je vais sur xxx.synology.me me renvoie sur ma livebox? On ne peux me renvoyé comme quickconnect sur mon nas? Le quickconnect en local me renvoie bien sur mon nas mais sur le lan 3. Peut importe vu que j'ai quand même accès.

Ok je viens de le rajouter.

Ok donc dans DMZ livebox, je m'ai mon adresse lan 1 192.168.2.xx C'est bien ça? Ou je dois mettre l'adresse 192.168.1.xx du routeur?

Il y a juste le DMZ qui reste à faire alors. Je croyais qu'il était à éviter. Si je le fais, que va m'apporter en plus le DMZ? Ok pour la dernière question.

Je suis en vdsl2 aussi. J'ai la livebox play et derrière le Asus-AC68U. Lors du test, j'avais la tv orange mise sur une chaine de canal+. Je trouve que ca fait pas beaucoup pour une fois. J'ai déjà eu plus. Donc c'est possible de supprimer la livebox pour juste le routeur asus? Tout en conservant la TV et le téléphone? Sans TV orange allumé livebox: asus: Livebox Etat de la ligne DSL 2.1 statut du lien DSL actif 2.2 mode de synchronisation DSL VDSL 2.3 dernière synchronisation DSL 14 janvier 2016, 03 h 03 m 2.4 durée de la synchronisation DSL 16 j 18 h 46 m 59 s Débit et marge au bruit 2.5 débit de synchronisation DSL montante 880 Kb/s 2.6 débit de synchronisation DSL descendante 17976 Kb/s 2.7 marge de bruit liaison descendante 9.1 dB Indicateur de qualité de la ligne (erreurs) 2.8 secondes erronées du sens descendant (depuis la dernière synchronisation) 38 2.9 secondes gravement erronées du sens descendant (depuis la dernière synchronisation) 25

Bonsoir, j'ai des problèmes sur l'environnement réseau quand je fais le test avec EZ-internet. J'ai une livebox et un routeur Asus RT-AC68U. Mon nas est un DS1513+. J'ai lu que l'on ne pouvais pas mettre la livebox play en bridge. Comment faire pour que tout soit redirigé (bien configuré) vers le routeur Asus. Est ce possible sinon de brancher les deux passerelles (192.168.1.x de Orange et 192.168.2.x de Asus) sur le NAS. Comme ça, en plus, j'aurais accès à mon nas sur les deux réseaux? J'ai quasi rien de branché sur ma livebox (juste 2 périphérique pas encore mis sur le routeur asus) et bien sur la TV. Je pense que je vais supprimer la couverture wifi de la livebox après. Comme ça, je serais sur même si je préfère la laisser, on ne sais jamais. J'espère que vous pourrez m'aider? Cordialement Nicolas.

Je l'ai branché direct sur le pc. Même problème. J'ai redémarré le synology et tout refonctionne. J'ai supprimé mon volume des 5 disques, retirer les deux en trop et refait un volume en SHR 1 disque

Je vais essayer demain mais c'est pas pratique.

Du logiciel Assistant . Erreur La Configuration rapide ne s'est pas terminée en raison d'une perte de connexion. Fermez le dialogue et réessayez ultérieusement. Je n'ai plus accès au DSM. Je pense que cela peut venir de mon routeur (aucune règle de créée car je ne sais pas comment les faires). En faite, j'ai: Livebox (192.168.1.1) -> Décodeur Orange -> Routeur Asus (RT-AC68U) -> Téléphone par internet Sur le routeur, il y a tous mes périphérique TV, ordi, Hub, switch, box domotique, etc. Tout ce qu'il y a le réseau internet. J'ai pris toutes les adresses attribué en DHCP vers une adresse Fixe. J'avais essayé en désactivant le DHCP Orange et le wifi mais ça ne suffit pas.

Je n'arrive pas à configurer depuis le logiciel. J'ai essayé en manuel et en DHCP mais erreur de configuration.

C'est une bonne nouvelle pour mes disques?

DiskStation> smartctl -d sat -a /dev/sda smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAK9U6US LU WWN Device Id: 5 000cca 22beebc86 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Dec 31 11:35:30 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 575) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 82 3 Spin_Up_Time 0x0007 141 141 024 Pre-fail Always - 527 (Average 565) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 149 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17229 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 34 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 821 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 821 194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 21/55) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17226 - # 2 Extended offline Completed without error 00% 17207 - # 3 Short offline Completed without error 00% 11750 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdb smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAK9WGTS LU WWN Device Id: 5 000cca 22beec4ff Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Dec 31 11:39:18 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 560) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 78 3 Spin_Up_Time 0x0007 137 137 024 Pre-fail Always - 532 (Average 595) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 153 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17229 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 39 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 831 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 831 194 Temperature_Celsius 0x0002 133 133 000 Old_age Always - 45 (Min/Max 19/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17225 - # 2 Short offline Completed without error 00% 17145 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdc smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK2301PAK3162T LU WWN Device Id: 5 000cca 22beba81d Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Dec 31 11:39:20 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 566) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 82 3 Spin_Up_Time 0x0007 139 139 024 Pre-fail Always - 538 (Average 575) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 149 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 35 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17227 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 35 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 825 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 825 194 Temperature_Celsius 0x0002 139 139 000 Old_age Always - 43 (Min/Max 20/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17224 - # 2 Short offline Completed without error 00% 17144 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdd smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1301PAKNWLJS LU WWN Device Id: 5 000cca 22bf3c588 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Dec 31 11:39:21 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 559) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 77 3 Spin_Up_Time 0x0007 134 134 024 Pre-fail Always - 549 (Average 603) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 147 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17230 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 33 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 822 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 822 194 Temperature_Celsius 0x0002 139 139 000 Old_age Always - 43 (Min/Max 21/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17226 - # 2 Short offline Completed without error 00% 17146 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sde smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAKA5V3S LU WWN Device Id: 5 000cca 22beee827 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Dec 31 11:39:34 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 568) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 78 3 Spin_Up_Time 0x0007 138 138 024 Pre-fail Always - 517 (Average 601) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 151 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 35 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17229 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 36 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 825 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 825 194 Temperature_Celsius 0x0002 146 146 000 Old_age Always - 41 (Min/Max 15/55) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17225 - # 2 Short offline Completed without error 00% 17145 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Test doit être terminé. Aucun erreur je crois.

Ouai, c'est sur. Et demain pour voir le résultat, je devrait refaire la requete 2?

DiskStation> smartctl -d sat -a /dev/sda smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAK9U6US LU WWN Device Id: 5 000cca 22beebc86 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 22:59:51 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 575) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 82 3 Spin_Up_Time 0x0007 141 141 024 Pre-fail Always - 527 (Average 565) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 149 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17217 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 34 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 821 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 821 194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 21/55) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17207 - # 2 Short offline Completed without error 00% 11750 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdb smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAK9WGTS LU WWN Device Id: 5 000cca 22beec4ff Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 22:59:53 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 560) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 78 3 Spin_Up_Time 0x0007 137 137 024 Pre-fail Always - 532 (Average 595) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 153 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17217 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 39 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 831 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 831 194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 19/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 17145 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdc smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK2301PAK3162T LU WWN Device Id: 5 000cca 22beba81d Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 22:59:55 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 566) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 82 3 Spin_Up_Time 0x0007 139 139 024 Pre-fail Always - 538 (Average 575) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 149 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 35 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17215 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 35 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 824 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 824 194 Temperature_Celsius 0x0002 142 142 000 Old_age Always - 42 (Min/Max 20/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 17144 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdd smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1301PAKNWLJS LU WWN Device Id: 5 000cca 22bf3c588 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 22:59:57 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 559) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 77 3 Spin_Up_Time 0x0007 134 134 024 Pre-fail Always - 549 (Average 603) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 147 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17217 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 33 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 821 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 821 194 Temperature_Celsius 0x0002 146 146 000 Old_age Always - 41 (Min/Max 21/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 17146 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdesmartctl -d sat -t long /dev/sda smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org ERROR: smartctl takes ONE device name as the final command-line argument. You have provided 2 device names: /dev/sdesmartctl /dev/sda Use smartctl -h to get a usage summary DiskStation> smartctl -d sat -t long /dev/sdb smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 560 minutes for test to complete. Test will complete after Thu Dec 31 08:20:41 2015 Use smartctl -X to abort test. Smartctl: Failed to send email notify msg to scemd. DiskStation> smartctl -d sat -t long /dev/sdc smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 566 minutes for test to complete. Test will complete after Thu Dec 31 08:26:43 2015 Use smartctl -X to abort test. Smartctl: Failed to send email notify msg to scemd. DiskStation> smartctl -d sat -t long /dev/sdd smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 559 minutes for test to complete. Test will complete after Thu Dec 31 08:19:46 2015 Use smartctl -X to abort test. Smartctl: Failed to send email notify msg to scemd. DiskStation> clear DiskStation> smartctl -d sat -a /dev/sda smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAK9U6US LU WWN Device Id: 5 000cca 22beebc86 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 23:01:20 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 575) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 82 3 Spin_Up_Time 0x0007 141 141 024 Pre-fail Always - 527 (Average 565) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 149 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17217 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 34 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 821 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 821 194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 21/55) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17207 - # 2 Short offline Completed without error 00% 11750 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdb smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAK9WGTS LU WWN Device Id: 5 000cca 22beec4ff Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 23:01:21 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 560) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 78 3 Spin_Up_Time 0x0007 137 137 024 Pre-fail Always - 532 (Average 595) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 153 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17217 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 39 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 831 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 831 194 Temperature_Celsius 0x0002 133 133 000 Old_age Always - 45 (Min/Max 19/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 17145 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdc smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK2301PAK3162T LU WWN Device Id: 5 000cca 22beba81d Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 23:01:23 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 566) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 82 3 Spin_Up_Time 0x0007 139 139 024 Pre-fail Always - 538 (Average 575) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 149 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 35 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17215 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 35 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 824 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 824 194 Temperature_Celsius 0x0002 142 142 000 Old_age Always - 42 (Min/Max 20/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 17144 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdd smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1301PAKNWLJS LU WWN Device Id: 5 000cca 22bf3c588 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 23:01:25 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 559) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 77 3 Spin_Up_Time 0x0007 134 134 024 Pre-fail Always - 549 (Average 603) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 147 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17218 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 33 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 821 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 821 194 Temperature_Celsius 0x0002 142 142 000 Old_age Always - 42 (Min/Max 21/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 17146 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sde smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAKA5V3S LU WWN Device Id: 5 000cca 22beee827 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 23:01:28 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 568) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 78 3 Spin_Up_Time 0x0007 138 138 024 Pre-fail Always - 517 (Average 601) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 151 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 35 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17216 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 36 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 824 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 824 194 Temperature_Celsius 0x0002 150 150 000 Old_age Always - 40 (Min/Max 15/55) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 17145 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Et la deuxième requète: DiskStation> smartctl -d sat -t long /dev/sdb smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mod e" successful. Testing has begun. Please wait 560 minutes for test to complete. Test will complete after Thu Dec 31 08:20:41 2015 Use smartctl -X to abort test. Smartctl: Failed to send email notify msg to scemd. DiskStation> smartctl -d sat -t long /dev/sdc smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mod e" successful. Testing has begun. Please wait 566 minutes for test to complete. Test will complete after Thu Dec 31 08:26:43 2015 Use smartctl -X to abort test. Smartctl: Failed to send email notify msg to scemd. DiskStation> smartctl -d sat -t long /dev/sdd smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mod e" successful. Testing has begun. Please wait 559 minutes for test to complete. Test will complete after Thu Dec 31 08:19:46 2015 Use smartctl -X to abort test. Smartctl: Failed to send email notify msg to scemd. DiskStation> clear DiskStation> smartctl -d sat -a /dev/sda smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAK9U6US LU WWN Device Id: 5 000cca 22beebc86 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 23:01:20 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support . Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 575) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAI LED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 82 3 Spin_Up_Time 0x0007 141 141 024 Pre-fail Always - 527 (Average 565) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 149 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17217 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 34 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 821 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 821 194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 21/55) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of _first_error # 1 Extended offline Completed without error 00% 17207 - # 2 Short offline Completed without error 00% 11750 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdb smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAK9WGTS LU WWN Device Id: 5 000cca 22beec4ff Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 23:01:21 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support . Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 560) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAI LED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 78 3 Spin_Up_Time 0x0007 137 137 024 Pre-fail Always - 532 (Average 595) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 153 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17217 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 39 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 831 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 831 194 Temperature_Celsius 0x0002 133 133 000 Old_age Always - 45 (Min/Max 19/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of _first_error # 1 Short offline Completed without error 00% 17145 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdc smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK2301PAK3162T LU WWN Device Id: 5 000cca 22beba81d Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 23:01:23 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support . Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 566) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAI LED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 82 3 Spin_Up_Time 0x0007 139 139 024 Pre-fail Always - 538 (Average 575) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 149 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 35 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17215 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 35 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 824 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 824 194 Temperature_Celsius 0x0002 142 142 000 Old_age Always - 42 (Min/Max 20/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of _first_error # 1 Short offline Completed without error 00% 17144 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sdd smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1301PAKNWLJS LU WWN Device Id: 5 000cca 22bf3c588 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 23:01:25 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support . Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 559) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAI LED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 77 3 Spin_Up_Time 0x0007 134 134 024 Pre-fail Always - 549 (Average 603) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 147 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17218 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 33 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 821 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 821 194 Temperature_Celsius 0x0002 142 142 000 Old_age Always - 42 (Min/Max 21/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of _first_error # 1 Short offline Completed without error 00% 17146 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. DiskStation> smartctl -d sat -a /dev/sde smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Serial Number: PK1331PAKA5V3S LU WWN Device Id: 5 000cca 22beee827 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Dec 30 23:01:28 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support . Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 568) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAI LED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 78 3 Spin_Up_Time 0x0007 138 138 024 Pre-fail Always - 517 (Average 601) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 151 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 35 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17216 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 36 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 824 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 824 194 Temperature_Celsius 0x0002 150 150 000 Old_age Always - 40 (Min/Max 15/55) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of _first_error # 1 Short offline Completed without error 00% 17145 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Quelques problèmes de copier coller

En faite, j'ai toujours acces au ssh. C'est le seul truc que j'ai toujours. ET tant mieux.

Bonsoir, je pense que c'est terminer. DiskStation> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md2 : active raid6 sda5[0] sde5[4] sdd5[3] sdc5[2] sdb5[1] 11706850944 blocks super 1.2 level 6, 64k chunk, algorithm 18 [5/5] [UUUUU] md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] sde2[4] 2097088 blocks [5/5] [UUUUU] md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] sde1[4] 2490176 blocks [5/5] [UUUUU] unused devices: <none> Mais j'ai un problème. Je n'avais plus accès à mon interface DSM depuis la mise à jour du raid et là, accès refusé Edit: dans synology assistant, je suis en non configuré. Ca veut dire que je dois tout réinstallé? Si oui, j'ai perdu mon temps pour faire le changement de raid?

Oh oui bien avancé 28 decembre 01h DiskStation> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md2 : active raid6 sda5[0] sde5[4] sdd5[3] sdc5[2] sdb5[1] 11706850944 blocks super 1.2 level 6, 64k chunk, algorithm 2 [5/5] [UUUUU] [>....................] reshape = 1.3% (54279860/3902283648) finish=2933.6min speed=21860K/sec md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] sde2[4] 2097088 blocks [5/5] [UUUUU] md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] sde1[4] 2490176 blocks [5/5] [UUUUU] unused devices: <none> 29 Décembre 22h15 DiskStation> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md2 : active raid6 sda5[0] sde5[4] sdd5[3] sdc5[2] sdb5[1] 11706850944 blocks super 1.2 level 6, 64k chunk, algorithm 2 [5/5] [UUUUU] [=================>...] reshape = 89.6% (3498124416/3902283648) finish=329.6min speed=20434K/sec md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] sde2[4] 2097088 blocks [5/5] [UUUUU] md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] sde1[4] 2490176 blocks [5/5] [UUUUU] unused devices: <none>

Dec 15 00:00:01 DiskStation synopkg: pkgcurltool.cpp:261 Failed to curl perform, code=28, err=Error Dec 15 00:02:02 DiskStation synopkg: pkgcurltool.cpp:261 Failed to curl perform, code=28, err=Error Dec 15 00:04:03 DiskStation synopkg: pkgcurltool.cpp:261 Failed to curl perform, code=28, err=Error Dec 15 00:04:04 DiskStation synopkg: pkgcurltool.cpp:428 Failed to download https://payment.synology.com/api/getPackageList.php, code=28, err=Error Dec 15 00:06:48 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[1] Dec 15 00:10:18 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[2] Dec 15 00:24:50 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[1] Dec 15 00:39:20 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 15 00:41:51 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100] Dec 15 00:41:51 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed Dec 15 00:41:51 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology] Dec 15 00:44:54 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll. Dec 15 00:45:24 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100] Dec 15 00:45:24 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed Dec 15 00:45:24 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology] Dec 15 00:51:59 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll. Dec 15 00:52:29 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100] Dec 15 00:52:29 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed Dec 15 00:52:29 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology] Dec 15 01:00:53 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll. Dec 15 01:01:23 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100] Dec 15 01:01:23 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed Dec 15 01:01:23 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology] Dec 15 01:13:52 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[1] Dec 15 01:16:53 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll. Dec 15 01:17:23 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100] Dec 15 01:17:23 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed Dec 15 01:17:23 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology] Dec 15 01:31:23 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[1] Dec 15 01:34:37 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll. Dec 15 01:35:08 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100] Dec 15 01:35:08 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed Dec 15 01:35:08 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology] Dec 15 01:51:52 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll. Dec 15 01:52:22 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100] Dec 15 01:52:22 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed Dec 15 01:52:22 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology] Dec 15 01:58:21 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[1] Dec 15 02:13:52 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll. Dec 15 02:13:54 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology] Dec 16 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 16 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology] Dec 16 03:32:05 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 16 03:32:32 DiskStation ddnsd: ddnsd.c:2862 DDNS got IP changed. UpdateAll. Dec 16 03:32:35 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology] Dec 16 17:05:33 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 16 21:06:50 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 17 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 17 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology] Dec 18 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 18 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology] Dec 18 17:07:06 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 19 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 19 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology] Dec 19 19:43:34 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 20 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 20 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology] Dec 20 03:25:28 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 20 17:08:56 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 20 21:10:12 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 21 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 21 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology] Dec 21 17:06:03 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 22 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 22 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology] Dec 22 14:51:08 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 22 17:02:39 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 23 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 23 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology] Dec 23 03:34:52 DiskStation ddnsd: ddnsd.c:2862 DDNS got IP changed. UpdateAll. Dec 23 03:34:53 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [90.7.77.64] at [Synology] Dec 23 21:10:42 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 24 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 24 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [90.7.77.64] at [Synology] Dec 24 17:36:03 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 25 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 25 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [90.7.77.64] at [Synology] Dec 25 04:19:11 DiskStation entry.cgi_SYNO.Core.PortForwarding.RouterConf[1].get[30420]: src/libsynoportmap.cpp:514 file=/etc/portforward/router.conf not exists Dec 25 04:22:04 DiskStation entry.cgi_SYNO.Core.PortForwarding.RouterConf[1].get[32127]: src/libsynoportmap.cpp:514 file=/etc/portforward/router.conf not exists Dec 25 04:40:06 DiskStation entry.cgi_SYNO.Core.EzInternet[1].get[3965]: SYNO.Core.EzInternet.cpp:39 Failed to get key[step] in file[/tmp/ezinternet.step]. Dec 25 04:40:21 DiskStation entry.cgi_SYNO.Core.EzInternet[1].get[4073]: SYNO.Core.EzInternet.cpp:39 Failed to get key[step] in file[/tmp/ezinternet.step]. Dec 25 04:43:30 DiskStation entry.cgi_SYNO.Core.EzInternet[1].get[4888]: SYNO.Core.EzInternet.cpp:39 Failed to get key[step] in file[/tmp/ezinternet.step]. killall: synolunbkp: no process killed Dec 25 04:43:36 DiskStation [1655738.933709] init: dhcp-client (eth0) main process (9513) killed by TERM signal Dec 25 04:43:36 DiskStation dhcp-client: stopped on eth0 Dec 25 04:43:36 DiskStation entry.cgi_SYNO.Core.Network.Ethernet[1].set[4988]: net_route_table_edit.c:72 eth3 ip route del failed, instead of route Dec 25 04:43:37 DiskStation [1655739.712415] init: smbd main process (13846) killed by TERM signal Dec 25 04:43:42 DiskStation synorelayd: src/libsynoportmap.cpp:514 file=/etc/portforward/router.conf not exists Dec 25 04:43:42 DiskStation synorelayd: src/libsynoportmapHelper.cpp:151 SLibSynoPortMapRouterDetect() success: manual/non-support change port router Dec 25 04:43:42 DiskStation entry.cgi_SYNO.Core.Network[1].set[4988]: common_setting.cpp:292 check dns_primary: 81.253.149.14 -> 81.253.149.14 Dec 25 04:43:47 DiskStation entry.cgi_SYNO.Core.PortForwarding[1].detect[5801]: lib/libsynonetcheck.cpp:359 Public IP level is 2 Dec 25 04:43:47 DiskStation entry.cgi_SYNO.Core.PortForwarding[1].detect[5801]: src/libsynoportmap.cpp:357 nPublicIPLevel=2 > 1, can not do portforwarding Dec 25 04:43:49 DiskStation entry.cgi_SYNO.Core.PortForwarding[1].detect[5801]: src/libsynoportmap.cpp:379 All network env checks are pass Dec 25 04:43:51 DiskStation entry.cgi_SYNO.Core.PortForwarding[1].detect[5801]: src/NatpmpDetector.cpp:92 remove SZF_AIRPORT_LIST=/tmp/airport.tcp.local failed Dec 25 04:43:51 DiskStation entry.cgi_SYNO.Core.PortForwarding[1].detect[5896]: src/UpnpDetector.cpp:117 Detected brand=ASUSTeK Computer Inc. model=RT-AC68U version=3.0.0.4.378 Dec 25 04:49:17 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [90.7.77.64] at [Synology] Dec 25 08:39:52 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 25 18:03:39 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 25 23:21:21 DiskStation cups-lpd[21388]: Unable to connect to server: Connection refused Dec 26 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 26 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [90.7.77.64] at [Synology] Dec 26 14:19:31 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 26 14:26:57 DiskStation entry.cgi_SYNO.Core.Share[1].delete[20713]: share.cpp:2258 [3D] Success to delete. Dec 26 14:27:12 DiskStation entry.cgi_SYNO.Core.Share[1].delete[21144]: share.cpp:2258 [film] Success to delete. Dec 26 14:27:21 DiskStation entry.cgi_SYNO.Core.Share[1].delete[21558]: share.cpp:2258 [games] Success to delete. Dec 26 14:27:50 DiskStation entry.cgi_SYNO.Core.Share[1].delete[22028]: share.cpp:2258 [saga] Success to delete. Dec 26 14:27:58 DiskStation entry.cgi_SYNO.Core.Share[1].delete[22430]: share.cpp:2258 [Serie TV] Success to delete. Dec 26 14:28:18 DiskStation php: Failed to get VERSION Dec 26 14:28:18 DiskStation php: In AddOtherKeyServer: OnlineUpdateSynoKey failed Dec 26 16:41:43 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 26 17:02:20 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 26 17:21:08 DiskStation kernel: [1787536.866591] sd 9:0:0:0: [sdq] No Caching mode page found Dec 26 17:21:08 DiskStation kernel: [1787536.872177] sd 9:0:0:0: [sdq] Assuming drive cache: write through Dec 26 17:21:08 DiskStation kernel: [1787536.881616] sd 9:0:0:0: [sdq] No Caching mode page found Dec 26 17:21:08 DiskStation kernel: [1787536.887153] sd 9:0:0:0: [sdq] Assuming drive cache: write through Dec 26 17:21:08 DiskStation kernel: [1787536.942219] sd 9:0:0:0: [sdq] No Caching mode page found Dec 26 17:21:08 DiskStation kernel: [1787536.947745] sd 9:0:0:0: [sdq] Assuming drive cache: write through Dec 26 17:21:09 DiskStation hotplugd: hotplugd.c:1031 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/003, usbid=13fd:1240:57442D575831314435355058 [0x2200 file_get_section_value.c:53] Dec 26 17:21:09 DiskStation hotplugd: hotplugd.c:1274 ##### ACTION:add Dec 26 17:21:09 DiskStation hotplugd: DEVNAME:sdq Dec 26 17:21:09 DiskStation hotplugd: DEVICE:/proc/bus/usb/006/003 Dec 26 17:21:09 DiskStation hotplugd: DEVGUID:57442D5758313144353550580 Dec 26 17:21:09 DiskStation hotplugd: DEVPATH:sdq Dec 26 17:21:09 DiskStation hotplugd: SUBSYSTEM:block Dec 26 17:21:09 DiskStation hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1d.7/usb6/6-2/6-2:1.0/host9/target9:0:0/9:0:0:0 Dec 26 17:21:10 DiskStation hotplugd: hotplugd.c:1440 ==== USB disk [sdq] plugged in ==== Dec 26 17:21:10 DiskStation hotplugd: hotplugd.c:1441 goto USB disk, szDeviceName=sdq Dec 26 17:21:10 DiskStation hotplugd: volume_parts_info_get_by_dev.c:95 Dev:sdq cannot find PostfixNumber. Dec 26 17:21:10 DiskStation kernel: [1787538.471489] CIFS VFS: Malformed UNC in devname. Dec 26 17:21:10 DiskStation kernel: [1787538.897135] UDF-fs: warning (device sdq1): udf_fill_super: No partition found (1) Dec 26 17:21:10 DiskStation hotplugd: volume_external_mount.c:276 mount USB disk sdq1 partition 1 failed. [0x2C00 volume_external_part_mount.c:288] Dec 26 17:21:16 DiskStation synocheckshare: synocheckshare_vol_mount.c:47 Export Share [USB] [/dev/sdq2] [/volumeUSB1/usbshare1-2] Dec 26 17:21:44 DiskStation synocheckshare: synocheckshare_vol_unmount.c:147 Unmount Share [USB] [/dev/sdq2] [/volumeUSB1/usbshare1-2] Dec 26 17:22:07 DiskStation kernel: [1787596.001046] EXT3-fs (sdq1): Ignoring deprecated oldalloc option Dec 26 17:22:07 DiskStation kernel: [1787596.007192] EXT3-fs (sdq1): error: couldn't mount because of unsupported optional features (2c0) Dec 26 17:22:09 DiskStation synocheckshare: synocheckshare_vol_mount.c:47 Export Share [USB] [/dev/sdq1] [/volumeUSB1/usbshare] Dec 26 17:23:03 DiskStation kernel: [1787651.159052] Result: hostbyte=0x01 driverbyte=0x00 Dec 26 17:23:03 DiskStation kernel: [1787651.167668] cdb[0]=0x2a: 2a 00 04 40 d5 c0 00 00 f0 00 Dec 26 17:23:03 DiskStation kernel: [1787651.173234] end_request: I/O error, dev sdq, sector 71357888 Dec 26 17:23:03 DiskStation kernel: [1787651.187525] Result: hostbyte=0x01 driverbyte=0x00 Dec 26 17:23:03 DiskStation kernel: [1787651.196086] cdb[0]=0x2a: 2a 00 04 40 d6 b0 00 00 f0 00 Dec 26 17:23:03 DiskStation kernel: [1787651.201656] end_request: I/O error, dev sdq, sector 71358128 Dec 26 17:23:03 DiskStation kernel: [1787651.207651] Aborting journal on device sdq1-8. Dec 26 17:23:03 DiskStation kernel: [1787651.212294] JBD2: Error -5 detected when updating journal superblock for sdq1-8. Dec 26 17:23:03 DiskStation kernel: [1787651.219929] journal commit I/O error Dec 26 17:23:04 DiskStation hotplugd: usb_get_device_id.c:49 Get usb info failed, DEVICE=/proc/bus/usb/006/003 Dec 26 17:23:04 DiskStation hotplugd: hotplugd.c:1023 failed get usb device id from usb config, DEVICE=/proc/bus/usb/006/003 Dec 26 17:23:04 DiskStation hotplugd: hotplugd.c:1274 ##### ACTION:remove Dec 26 17:23:04 DiskStation hotplugd: DEVNAME:sdq Dec 26 17:23:04 DiskStation hotplugd: DEVICE:/proc/bus/usb/006/003 Dec 26 17:23:04 DiskStation hotplugd: DEVGUID:57442D5758313144353550580 Dec 26 17:23:04 DiskStation hotplugd: DEVPATH:sdq Dec 26 17:23:04 DiskStation hotplugd: SUBSYSTEM:block Dec 26 17:23:04 DiskStation hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1d.7/usb6/6-2/6-2:1.0/host9/target9:0:0/9:0:0:0 Dec 26 17:23:04 DiskStation hotplugd: hotplugd.c:1449 ==== USB disk [sdq] plugged out==== Dec 26 17:23:04 DiskStation hotplugd: SYNOReadOneSectorFromDev(57): failed to open device [/dev/sdq] (errno = 2) Dec 26 17:23:04 DiskStation hotplugd: disk_size_get.c:42 Failed to open /dev/sdq, errno=No such file or directory Dec 26 17:23:04 DiskStation hotplugd: volume_parts_info_get_by_dev.c:301 failed to get disk '/dev/sdq' size Dec 26 17:23:04 DiskStation synocheckshare: synocheckshare_vol_unmount.c:147 Unmount Share [USB] [/dev/sdq1] [/volumeUSB1/usbshare] Dec 26 17:23:04 DiskStation kernel: [1787653.102087] EXT4-fs error (device sdq1): ext4_find_entry:1469: inode #2: comm BackupShareDele: reading directory lblock 0 Dec 26 17:23:04 DiskStation kernel: [1787653.113507] EXT4-fs error (device sdq1): ext4_read_inode_bitmap:175: comm BackupShareDele: Cannot read inode bitmap - block_group = 0, inode_bitmap = 1228 Dec 26 17:23:04 DiskStation BackupShareDelete: share_tmp_path_get.c:42 Failed to mkdir, path=/volumeUSB1/usbshare/@tmp Dec 26 17:23:04 DiskStation BackupShareDelete: (32766) [err] share_backup_data.cpp:35 SYNOShareTmpPathGet: [0x0B00 share_tmp_path_get.c:43] Dec 26 17:23:04 DiskStation BackupShareDelete: (32766) [err] share_delete.cpp:44 remove cache on [usbshare1] Dec 26 17:23:05 DiskStation kernel: [1787653.621365] EXT4-fs error (device sdq1): ext4_put_super:840: Couldn't clean up the journal Dec 26 17:23:05 DiskStation kernel: [1787653.629889] EXT4-fs (sdq1): Remounting filesystem read-only Dec 26 18:00:26 DiskStation entry.cgi_SYNO.Core.Upgrade.Server[1].check[10210]: rssfile.cpp:90 failed to exec cmd=[wget --user-agent=synology_cedarview_1513+ DSM5.2-5644 Update 2 (dsmupdate) -O /var/run/autoupdate_tmp_file_RSS https://update.synology.com/autoupdate/genRSS.php?tz=Amsterdam&unique=synology_cedarview_1513%2B&major=5&minor=2&build_num=5644], ret=4, No such file or directory Dec 26 18:00:26 DiskStation entry.cgi_SYNO.Core.Upgrade.Server[1].check[10210]: dsmupdate.cpp:231 Fail to get RSS file Dec 26 18:00:26 DiskStation entry.cgi_SYNO.Core.Upgrade.Server[1].check[10210]: dsmupdate.cpp:392 Fail to get latest DSM info Dec 26 18:03:44 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 26 18:03:52 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[10210]: pkgcurltool.cpp:261 Failed to curl perform, code=28, err=Error Dec 26 18:03:55 DiskStation entry.cgi_SYNO.Core.Upgrade.Server[1].check[10859]: rssfile.cpp:90 failed to exec cmd=[wget --user-agent=synology_cedarview_1513+ DSM5.2-5644 Update 2 (dsmupdate) -O /var/run/autoupdate_tmp_file_RSS https://update.synology.com/autoupdate/genRSS.php?tz=Amsterdam&unique=synology_cedarview_1513%2B&major=5&minor=2&build_num=5644], ret=4, No such file or directory Dec 26 18:03:55 DiskStation entry.cgi_SYNO.Core.Upgrade.Server[1].check[10859]: dsmupdate.cpp:231 Fail to get RSS file Dec 26 18:03:55 DiskStation entry.cgi_SYNO.Core.Upgrade.Server[1].check[10859]: dsmupdate.cpp:392 Fail to get latest DSM info Dec 26 18:04:23 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[10210]: pkgcurltool.cpp:261 Failed to curl perform, code=35, err=Error Dec 26 18:04:23 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[10210]: pkgcurltool.cpp:423 Failed to download https://payment.synology.com/api/getPackageList.php, code=35, err=Error Dec 26 19:41:58 DiskStation entry.cgi_SYNO.Core.Share[1].delete[12644]: share.cpp:2258 [wii] Success to delete. Dec 26 19:42:12 DiskStation entry.cgi_SYNO.Core.Share[1].delete[13217]: share.cpp:2258 [autre] Success to delete. Dec 26 20:04:54 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 26 20:28:06 DiskStation entry.cgi_SYNO.Core.PortForwarding.RouterConf[1].get[27327]: src/libsynoportmap.cpp:514 file=/etc/portforward/router.conf not exists Dec 26 20:53:26 DiskStation PkgSynoMan.cgi: pkgcurltool.cpp:444 http://packages.synocommunity.com, Failed to request packages, httpResponseCode=502 Dec 26 20:53:26 DiskStation PkgSynoMan.cgi: pkgcurltool.cpp:444 http://packages.synocommunity.com, Failed to request packages, httpResponseCode=502 Dec 26 20:54:38 DiskStation PkgSynoMan.cgi: pkgserver.cpp:253 Failed to read data. Dec 26 20:54:38 DiskStation PkgSynoMan.cgi: pkgserver.cpp:253 Failed to read data. Dec 26 20:54:38 DiskStation PkgSynoMan.cgi: pkgserver.cpp:615 Failed to curl perform, code=42, err=Error, url=https://global.download.synology.com/download/spk/SurveillanceStation/7.1-4080/SurveillanceStation-cedarview-7.1-4080.spk Dec 26 22:29:18 DiskStation synomediaparserd: mediapar_media.c (50) Failed to get misc info from file [/volume1/video/Bluray/Le Seigneur des anneaux INTEGRAL BLU RAY/LA COMMUNAUTE DE L'ANNEAU-FULL BLU-RAY/BDMV/STREAM/00003.m2ts]. Dec 26 22:29:22 DiskStation synomediaparserd: mediapar_media.c (50) Failed to get misc info from file [/volume1/video/Bluray/Le Seigneur des anneaux INTEGRAL BLU RAY/LA COMMUNAUTE DE L'ANNEAU-FULL BLU-RAY/BDMV/STREAM/00017.m2ts]. Dec 26 22:29:31 DiskStation synomediaparserd: mediapar_media.c (50) Failed to get misc info from file [/volume1/video/Bluray/Le Seigneur des anneaux INTEGRAL BLU RAY/LE RETOUR DU ROI-FULL BLU RAY/BDMV/STREAM/00003.m2ts]. Dec 26 22:29:36 DiskStation synomediaparserd: mediapar_media.c (50) Failed to get misc info from file [/volume1/video/Bluray/SNOWPIERCER/BDMV/STREAM/00066.m2ts]. Dec 26 22:29:40 DiskStation synomediaparserd: mediapar_media.c (50) Failed to get misc info from file [/volume1/video/Bluray/SNOWPIERCER/BDMV/STREAM/00067.m2ts]. Dec 26 22:29:52 DiskStation synomediaparserd: mediapar_media.c (50) Failed to get misc info from file [/volume1/video/Bluray/La Belle et La Bête 2014 1080p BluRay VC-1 DTS-HD MA 5.1-WiHD/LABELLEETLABETE/BDMV/STREAM/00006.m2ts]. Dec 26 22:52:06 DiskStation entry.cgi_SYNO.Core.Share[1].delete[9807]: share.cpp:2258 [logiciel] Success to delete. Dec 27 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 27 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [90.7.77.64] at [Synology] Dec 27 13:09:58 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[1] Dec 27 16:41:36 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 27 21:14:37 DiskStation kernel: [1887904.264827] md: md2: current auto_remap = 0 Dec 27 21:14:37 DiskStation kernel: [1887904.269286] md: reshape of RAID array md2 Dec 27 22:14:44 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)] Dec 27 22:58:43 DiskStation kernel: [1894148.282671] INFO: task jbd2/dm-0-8:11795 blocked for more than 120 seconds. Dec 27 22:58:43 DiskStation kernel: [1894148.289837] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Dec 27 22:58:43 DiskStation kernel: [1894148.305180] ffff88007981fcd8 0000000000000046 0000000000000001 ffff88007acd0770 Dec 27 22:58:43 DiskStation kernel: [1894148.312866] 0000000000000286 ffff88007ec26a30 ffff88007981ffd8 ffff88007981ffd8 Dec 27 22:58:43 DiskStation kernel: [1894148.320659] ffff88007981ffd8 ffff88007ec26a30 0000000000000246 ffff88007981fe08 Dec 27 22:58:43 DiskStation kernel: [1894148.328340] Call Trace: Dec 27 22:58:43 DiskStation kernel: [1894148.330986] [<ffffffff811d08c9>] ? jbd2_journal_commit_transaction+0x1e9/0x16c0 Dec 27 22:58:43 DiskStation kernel: [1894148.338593] [<ffffffff810634de>] ? update_curr+0x8e/0xe0 Dec 27 22:58:43 DiskStation kernel: [1894148.344191] [<ffffffff81065749>] ? dequeue_task_fair+0x1d9/0x6b0 Dec 27 22:58:43 DiskStation kernel: [1894148.350477] [<ffffffff8105cabb>] ? update_rq_clock+0x2b/0x50 Dec 27 22:58:43 DiskStation kernel: [1894148.356405] [<ffffffff8148a87b>] ? __schedule+0x27b/0x6a0 Dec 27 22:58:43 DiskStation kernel: [1894148.362092] [<ffffffff810412d4>] ? lock_timer_base.isra.28+0x34/0x70 Dec 27 22:58:43 DiskStation kernel: [1894148.368725] [<ffffffff81054560>] ? finish_wait+0xa0/0xa0 Dec 27 22:58:43 DiskStation kernel: [1894148.374341] [<ffffffff811d4e94>] ? kjournald2+0xb4/0x240 Dec 27 22:58:43 DiskStation kernel: [1894148.379953] [<ffffffff81054560>] ? finish_wait+0xa0/0xa0 Dec 27 22:58:43 DiskStation kernel: [1894148.385547] [<ffffffff811d4de0>] ? jbd2_journal_release_jbd_inode+0x120/0x120 Dec 27 22:58:43 DiskStation kernel: [1894148.392961] [<ffffffff81053f85>] ? kthread+0xb5/0xc0 Dec 27 22:58:43 DiskStation kernel: [1894148.398220] [<ffffffff81053ed0>] ? kthread_create_on_node+0x120/0x120 Dec 27 22:58:43 DiskStation kernel: [1894148.404951] [<ffffffff8148c42c>] ? ret_from_fork+0x7c/0xb0 Dec 27 22:58:43 DiskStation kernel: [1894148.410736] [<ffffffff81053ed0>] ? kthread_create_on_node+0x120/0x120 Dec 27 22:58:43 DiskStation kernel: [1894148.417476] INFO: task mysqld:13876 blocked for more than 120 seconds. Dec 27 22:58:43 DiskStation kernel: [1894148.424201] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Dec 27 22:58:43 DiskStation kernel: [1894148.439538] ffff8800686c3ba8 0000000000000086 ffff8800686c3b58 ffff88007acd0770 Dec 27 22:58:43 DiskStation kernel: [1894148.447247] 0000000000000001 ffff880075fa21c0 ffff8800686c3fd8 ffff8800686c3fd8 Dec 27 22:58:43 DiskStation kernel: [1894148.454940] ffff8800686c3fd8 ffff880075fa21c0 0000000000000246 ffff88007a82f800 Dec 27 22:58:43 DiskStation kernel: [1894148.462641] Call Trace: Dec 27 22:58:43 DiskStation kernel: [1894148.465297] [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0 Dec 27 22:58:43 DiskStation kernel: [1894148.471580] [<ffffffff81054560>] ? finish_wait+0xa0/0xa0 Dec 27 22:58:43 DiskStation kernel: [1894148.477187] [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150 Dec 27 22:58:43 DiskStation kernel: [1894148.483566] [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80 Dec 27 22:58:43 DiskStation kernel: [1894148.489611] [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240 Dec 27 22:58:43 DiskStation kernel: [1894148.495897] [<ffffffff8110d179>] ? update_time+0x79/0xc0 Dec 27 22:58:43 DiskStation kernel: [1894148.501496] [<ffffffff81111d60>] ? __mnt_want_write+0x40/0x60 Dec 27 22:58:43 DiskStation kernel: [1894148.507527] [<ffffffff8110d3ac>] ? touch_atime+0xfc/0x140 Dec 27 22:58:43 DiskStation kernel: [1894148.513249] [<ffffffff810b34e4>] ? generic_file_aio_read+0x5c4/0x710 Dec 27 22:58:43 DiskStation kernel: [1894148.519892] [<ffffffff810eee2b>] ? do_sync_read+0x6b/0xa0 Dec 27 22:58:44 DiskStation kernel: [1894148.525589] [<ffffffff810f00b9>] ? vfs_read+0xa9/0x190 Dec 27 22:58:44 DiskStation kernel: [1894148.531030] [<ffffffff810f068d>] ? SyS_pread64+0x9d/0xb0 Dec 27 22:58:44 DiskStation kernel: [1894148.536656] [<ffffffff8108b73d>] ? compat_sys_clock_gettime+0x7d/0x90 Dec 27 22:58:44 DiskStation kernel: [1894148.543391] [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e Dec 27 22:58:44 DiskStation kernel: [1894148.549487] INFO: task mysqld:13877 blocked for more than 120 seconds. Dec 27 22:58:44 DiskStation kernel: [1894148.556280] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Dec 27 22:58:44 DiskStation kernel: [1894148.571598] ffff88004548fba8 0000000000000086 ffff88004548fb58 ffff88007acd0770 Dec 27 22:58:44 DiskStation kernel: [1894148.579305] 0000000000000001 ffff88006b3704c0 ffff88004548ffd8 ffff88004548ffd8 Dec 27 22:58:44 DiskStation kernel: [1894148.587015] ffff88004548ffd8 ffff88006b3704c0 0000000000000246 ffff88007a82f800 Dec 27 22:58:44 DiskStation kernel: [1894148.594726] Call Trace: Dec 27 22:58:44 DiskStation kernel: [1894148.597381] [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0 Dec 27 22:58:44 DiskStation kernel: [1894148.603674] [<ffffffff81054560>] ? finish_wait+0xa0/0xa0 Dec 27 22:58:44 DiskStation kernel: [1894148.609271] [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150 Dec 27 22:58:44 DiskStation kernel: [1894148.615651] [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80 Dec 27 22:58:44 DiskStation kernel: [1894148.621667] [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240 Dec 27 22:58:44 DiskStation kernel: [1894148.627976] [<ffffffff8110d179>] ? update_time+0x79/0xc0 Dec 27 22:58:44 DiskStation kernel: [1894148.633577] [<ffffffff81111d60>] ? __mnt_want_write+0x40/0x60 Dec 27 22:58:44 DiskStation kernel: [1894148.639614] [<ffffffff8110d3ac>] ? touch_atime+0xfc/0x140 Dec 27 22:58:44 DiskStation kernel: [1894148.645306] [<ffffffff810b34e4>] ? generic_file_aio_read+0x5c4/0x710 Dec 27 22:58:44 DiskStation kernel: [1894148.651945] [<ffffffff810eee2b>] ? do_sync_read+0x6b/0xa0 Dec 27 22:58:44 DiskStation kernel: [1894148.657626] [<ffffffff810f00b9>] ? vfs_read+0xa9/0x190 Dec 27 22:58:44 DiskStation kernel: [1894148.663052] [<ffffffff810f068d>] ? SyS_pread64+0x9d/0xb0 Dec 27 22:58:44 DiskStation kernel: [1894148.668660] [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e Dec 27 22:58:44 DiskStation kernel: [1894148.674709] INFO: task Plex Media Serv:25260 blocked for more than 120 seconds. Dec 27 22:58:44 DiskStation kernel: [1894148.682209] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Dec 27 22:58:44 DiskStation kernel: [1894148.697514] ffff88006136fae8 0000000000200086 0000000000000001 ffff88007acd00c0 Dec 27 22:58:44 DiskStation kernel: [1894148.705204] ffff88006136fac8 ffff88005ef2f750 ffff88006136ffd8 ffff88006136ffd8 Dec 27 22:58:44 DiskStation kernel: [1894148.712915] ffff88006136ffd8 ffff88005ef2f750 0000000000200246 ffff88007a82f800 Dec 27 22:58:44 DiskStation kernel: [1894148.720629] Call Trace: Dec 27 22:58:44 DiskStation kernel: [1894148.723295] [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0 Dec 27 22:58:44 DiskStation kernel: [1894148.729582] [<ffffffff81054560>] ? finish_wait+0xa0/0xa0 Dec 27 22:58:44 DiskStation kernel: [1894148.735175] [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150 Dec 27 22:58:44 DiskStation kernel: [1894148.741547] [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80 Dec 27 22:58:44 DiskStation kernel: [1894148.747575] [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240 Dec 27 22:58:44 DiskStation kernel: [1894148.753890] [<ffffffff8110d179>] ? update_time+0x79/0xc0 Dec 27 22:58:44 DiskStation kernel: [1894148.759521] [<ffffffff81110d19>] ? mnt_clone_write+0x9/0x30 Dec 27 22:58:44 DiskStation kernel: [1894148.765396] [<ffffffff8110d257>] ? file_update_time+0x97/0xf0 Dec 27 22:58:44 DiskStation kernel: [1894148.771464] [<ffffffff810b2bda>] ? __generic_file_aio_write+0x18a/0x3f0 Dec 27 22:58:44 DiskStation kernel: [1894148.778356] [<ffffffff810b2eaa>] ? generic_file_aio_write+0x6a/0xe0 Dec 27 22:58:44 DiskStation kernel: [1894148.784921] [<ffffffff8118a9c8>] ? ext4_file_write+0xc8/0x420 Dec 27 22:58:44 DiskStation kernel: [1894148.790978] [<ffffffff810fec4c>] ? filename_lookup.isra.35+0x2c/0x80 Dec 27 22:58:44 DiskStation kernel: [1894148.797620] [<ffffffff811033ad>] ? user_path_at_empty+0x6d/0xc0 Dec 27 22:58:44 DiskStation kernel: [1894148.803826] [<ffffffff810eed8b>] ? do_sync_write+0x6b/0xa0 Dec 27 22:58:44 DiskStation kernel: [1894148.809592] [<ffffffff810efd7b>] ? vfs_write+0xcb/0x360 Dec 27 22:58:44 DiskStation kernel: [1894148.815113] [<ffffffff8102e3d1>] ? sys32_stat64+0x21/0x30 Dec 27 22:58:44 DiskStation kernel: [1894148.820813] [<ffffffff810f059d>] ? SyS_write+0x6d/0xc0 Dec 27 22:58:44 DiskStation kernel: [1894148.826235] [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e Dec 27 22:58:44 DiskStation kernel: [1894148.832288] INFO: task python:13361 blocked for more than 120 seconds. Dec 27 22:58:44 DiskStation kernel: [1894148.839005] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Dec 27 22:58:44 DiskStation kernel: [1894148.854349] ffff88005f2339e8 0000000000200086 0000000017f00901 ffff88007acd00c0 Dec 27 22:58:44 DiskStation kernel: [1894148.862048] ffff8800502ae470 ffff88007ae6afe0 ffff88005f233fd8 ffff88005f233fd8 Dec 27 22:58:44 DiskStation kernel: [1894148.869758] ffff88005f233fd8 ffff88007ae6afe0 0000000000000000 ffff88007ae6afe0 Dec 27 22:58:44 DiskStation kernel: [1894148.877497] Call Trace: Dec 27 22:58:44 DiskStation kernel: [1894148.880151] [<ffffffff81120980>] ? do_thaw_one+0x60/0x60 Dec 27 22:58:44 DiskStation kernel: [1894148.885750] [<ffffffff8148ae1b>] ? io_schedule+0x8b/0xd0 Dec 27 22:58:44 DiskStation kernel: [1894148.891378] [<ffffffff8112098a>] ? sleep_on_buffer+0xa/0x20 Dec 27 22:58:44 DiskStation kernel: [1894148.897221] [<ffffffff81488711>] ? __wait_on_bit_lock+0x51/0xb0 Dec 27 22:58:44 DiskStation kernel: [1894148.903446] [<ffffffff810b1b1a>] ? find_get_page+0x1a/0xa0 Dec 27 22:58:44 DiskStation kernel: [1894148.909201] [<ffffffff81120980>] ? do_thaw_one+0x60/0x60 Dec 27 22:58:44 DiskStation kernel: [1894148.914813] [<ffffffff814887ef>] ? out_of_line_wait_on_bit_lock+0x7f/0xa0 Dec 27 22:58:44 DiskStation kernel: [1894148.921981] [<ffffffff81054590>] ? autoremove_wake_function+0x30/0x30 Dec 27 22:58:44 DiskStation kernel: [1894148.928727] [<ffffffff811cfa3e>] ? do_get_write_access+0x7e/0x490 Dec 27 22:58:44 DiskStation kernel: [1894148.935121] [<ffffffff811221bd>] ? __getblk+0x1d/0x2e0 Dec 27 22:58:44 DiskStation kernel: [1894148.940553] [<ffffffff811cffaa>] ? jbd2_journal_get_write_access+0x2a/0x50 Dec 27 22:58:44 DiskStation kernel: [1894148.947713] [<ffffffff811b0669>] ? __ext4_journal_get_write_access+0x39/0x90 Dec 27 22:58:44 DiskStation kernel: [1894148.955055] [<ffffffff811b88f0>] ? ext4_free_blocks+0x330/0xa60 Dec 27 22:58:44 DiskStation kernel: [1894148.961258] [<ffffffff81121799>] ? __find_get_block+0x99/0x1d0 Dec 27 22:58:44 DiskStation kernel: [1894148.967406] [<ffffffff811ae1b7>] ? ext4_ext_remove_space+0xb17/0xd90 Dec 27 22:58:44 DiskStation kernel: [1894148.974054] [<ffffffff811af8b1>] ? ext4_ext_truncate+0xa1/0xd0 Dec 27 22:58:44 DiskStation kernel: [1894148.980211] [<ffffffff81192b9d>] ? ext4_truncate+0x2ad/0x2f0 Dec 27 22:58:44 DiskStation kernel: [1894148.986161] [<ffffffff81195758>] ? ext4_evict_inode+0x3e8/0x420 Dec 27 22:58:44 DiskStation kernel: [1894148.992411] [<ffffffff8110cf32>] ? evict+0xa2/0x190 Dec 27 22:58:44 DiskStation kernel: [1894148.997640] [<ffffffff810ff4dd>] ? do_unlinkat+0x19d/0x1f0 Dec 27 22:58:44 DiskStation kernel: [1894149.003515] [<ffffffff8102e3d1>] ? sys32_stat64+0x21/0x30 Dec 27 22:58:44 DiskStation kernel: [1894149.009235] [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e Dec 27 23:00:44 DiskStation kernel: [1894268.965280] INFO: task jbd2/dm-0-8:11795 blocked for more than 120 seconds. Dec 27 23:00:44 DiskStation kernel: [1894268.972445] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Dec 27 23:00:44 DiskStation kernel: [1894268.987783] ffff88007981fcd8 0000000000000046 0000000000000001 ffff88007acd0770 Dec 27 23:00:44 DiskStation kernel: [1894268.995456] 0000000000000286 ffff88007ec26a30 ffff88007981ffd8 ffff88007981ffd8 Dec 27 23:00:44 DiskStation kernel: [1894269.003157] ffff88007981ffd8 ffff88007ec26a30 0000000000000246 ffff88007981fe08 Dec 27 23:00:44 DiskStation kernel: [1894269.010859] Call Trace: Dec 27 23:00:44 DiskStation kernel: [1894269.013505] [<ffffffff811d08c9>] ? jbd2_journal_commit_transaction+0x1e9/0x16c0 Dec 27 23:00:44 DiskStation kernel: [1894269.021107] [<ffffffff810634de>] ? update_curr+0x8e/0xe0 Dec 27 23:00:44 DiskStation kernel: [1894269.026712] [<ffffffff81065749>] ? dequeue_task_fair+0x1d9/0x6b0 Dec 27 23:00:44 DiskStation kernel: [1894269.033030] [<ffffffff8105cabb>] ? update_rq_clock+0x2b/0x50 Dec 27 23:00:44 DiskStation kernel: [1894269.039020] [<ffffffff8148a87b>] ? __schedule+0x27b/0x6a0 Dec 27 23:00:44 DiskStation kernel: [1894269.044707] [<ffffffff810412d4>] ? lock_timer_base.isra.28+0x34/0x70 Dec 27 23:00:44 DiskStation kernel: [1894269.051334] [<ffffffff81054560>] ? finish_wait+0xa0/0xa0 Dec 27 23:00:44 DiskStation kernel: [1894269.056939] [<ffffffff811d4e94>] ? kjournald2+0xb4/0x240 Dec 27 23:00:44 DiskStation kernel: [1894269.062523] [<ffffffff81054560>] ? finish_wait+0xa0/0xa0 Dec 27 23:00:44 DiskStation kernel: [1894269.068131] [<ffffffff811d4de0>] ? jbd2_journal_release_jbd_inode+0x120/0x120 Dec 27 23:00:44 DiskStation kernel: [1894269.075540] [<ffffffff81053f85>] ? kthread+0xb5/0xc0 Dec 27 23:00:44 DiskStation kernel: [1894269.080800] [<ffffffff81053ed0>] ? kthread_create_on_node+0x120/0x120 Dec 27 23:00:44 DiskStation kernel: [1894269.087516] [<ffffffff8148c42c>] ? ret_from_fork+0x7c/0xb0 Dec 27 23:00:44 DiskStation kernel: [1894269.093293] [<ffffffff81053ed0>] ? kthread_create_on_node+0x120/0x120 Dec 27 23:00:44 DiskStation kernel: [1894269.100082] INFO: task mysqld:13876 blocked for more than 120 seconds. Dec 27 23:00:44 DiskStation kernel: [1894269.106792] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Dec 27 23:00:44 DiskStation kernel: [1894269.122184] ffff8800686c3ba8 0000000000000086 ffff8800686c3b58 ffff88007acd0770 Dec 27 23:00:44 DiskStation kernel: [1894269.129906] 0000000000000001 ffff880075fa21c0 ffff8800686c3fd8 ffff8800686c3fd8 Dec 27 23:00:44 DiskStation kernel: [1894269.137617] ffff8800686c3fd8 ffff880075fa21c0 0000000000000246 ffff88007a82f800 Dec 27 23:00:44 DiskStation kernel: [1894269.145311] Call Trace: Dec 27 23:00:44 DiskStation kernel: [1894269.147989] [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0 Dec 27 23:00:44 DiskStation kernel: [1894269.154299] [<ffffffff81054560>] ? finish_wait+0xa0/0xa0 Dec 27 23:00:44 DiskStation kernel: [1894269.159914] [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150 Dec 27 23:00:44 DiskStation kernel: [1894269.166297] [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80 Dec 27 23:00:44 DiskStation kernel: [1894269.172344] [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240 Dec 27 23:00:44 DiskStation kernel: [1894269.178649] [<ffffffff8110d179>] ? update_time+0x79/0xc0 Dec 27 23:00:44 DiskStation kernel: [1894269.184244] [<ffffffff81111d60>] ? __mnt_want_write+0x40/0x60 Dec 27 23:00:44 DiskStation kernel: [1894269.190283] [<ffffffff8110d3ac>] ? touch_atime+0xfc/0x140 Dec 27 23:00:44 DiskStation kernel: [1894269.195958] [<ffffffff810b34e4>] ? generic_file_aio_read+0x5c4/0x710 Dec 27 23:00:44 DiskStation kernel: [1894269.202596] [<ffffffff810eee2b>] ? do_sync_read+0x6b/0xa0 Dec 27 23:00:44 DiskStation kernel: [1894269.208315] [<ffffffff810f00b9>] ? vfs_read+0xa9/0x190 Dec 27 23:00:44 DiskStation kernel: [1894269.213741] [<ffffffff810f068d>] ? SyS_pread64+0x9d/0xb0 Dec 27 23:00:44 DiskStation kernel: [1894269.219344] [<ffffffff8108b73d>] ? compat_sys_clock_gettime+0x7d/0x90 Dec 27 23:00:44 DiskStation kernel: [1894269.226063] [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e Dec 27 23:00:44 DiskStation kernel: [1894269.232118] INFO: task mysqld:13877 blocked for more than 120 seconds. Dec 27 23:00:44 DiskStation kernel: [1894269.238843] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Dec 27 23:00:44 DiskStation kernel: [1894269.254170] ffff88004548fba8 0000000000000086 ffff88004548fb58 ffff88007acd0770 Dec 27 23:00:44 DiskStation kernel: [1894269.261860] 0000000000000001 ffff88006b3704c0 ffff88004548ffd8 ffff88004548ffd8 Dec 27 23:00:44 DiskStation kernel: [1894269.269563] ffff88004548ffd8 ffff88006b3704c0 0000000000000246 ffff88007a82f800 Dec 27 23:00:44 DiskStation kernel: [1894269.277308] Call Trace: Dec 27 23:00:44 DiskStation kernel: [1894269.279973] [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0 Dec 27 23:00:44 DiskStation kernel: [1894269.286264] [<ffffffff81054560>] ? finish_wait+0xa0/0xa0 Dec 27 23:00:44 DiskStation kernel: [1894269.291886] [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150 Dec 27 23:00:44 DiskStation kernel: [1894269.298272] [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80 Dec 27 23:00:44 DiskStation kernel: [1894269.304332] [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240 Dec 27 23:00:44 DiskStation kernel: [1894269.310640] [<ffffffff8110d179>] ? update_time+0x79/0xc0 Dec 27 23:00:44 DiskStation kernel: [1894269.316236] [<ffffffff81111d60>] ? __mnt_want_write+0x40/0x60 Dec 27 23:00:44 DiskStation kernel: [1894269.322266] [<ffffffff8110d3ac>] ? touch_atime+0xfc/0x140 Dec 27 23:00:44 DiskStation kernel: [1894269.327951] [<ffffffff810b34e4>] ? generic_file_aio_read+0x5c4/0x710 Dec 27 23:00:44 DiskStation kernel: [1894269.334594] [<ffffffff810eee2b>] ? do_sync_read+0x6b/0xa0 Dec 27 23:00:44 DiskStation kernel: [1894269.340286] [<ffffffff810f00b9>] ? vfs_read+0xa9/0x190 Dec 27 23:00:44 DiskStation kernel: [1894269.345722] [<ffffffff810f068d>] ? SyS_pread64+0x9d/0xb0 Dec 27 23:00:44 DiskStation kernel: [1894269.351306] [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e Dec 27 23:00:44 DiskStation kernel: [1894269.357438] INFO: task mysqld:14935 blocked for more than 120 seconds. Dec 27 23:00:44 DiskStation kernel: [1894269.364219] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Dec 27 23:00:44 DiskStation kernel: [1894269.379561] ffff880068527ae8 0000000000000086 0000000000000000 ffffffff81812440 Dec 27 23:00:44 DiskStation kernel: [1894269.387267] 0000000000000000 ffff88006b23e380 ffff880068527fd8 ffff880068527fd8 Dec 27 23:00:44 DiskStation kernel: [1894269.394941] ffff880068527fd8 ffff88006b23e380 0000000000000246 ffff88007a82f800 Dec 27 23:00:44 DiskStation kernel: [1894269.402634] Call Trace: Dec 27 23:00:44 DiskStation kernel: [1894269.405281] [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0 Dec 27 23:00:44 DiskStation kernel: [1894269.411566] [<ffffffff81054560>] ? finish_wait+0xa0/0xa0 Dec 27 23:00:44 DiskStation kernel: [1894269.417159] [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150 Dec 27 23:00:44 DiskStation kernel: [1894269.423529] [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80 Dec 27 23:00:44 DiskStation kernel: [1894269.429555] [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240 Dec 27 23:00:44 DiskStation kernel: [1894269.435835] [<ffffffff8110d179>] ? update_time+0x79/0xc0 Dec 27 23:00:44 DiskStation kernel: [1894269.441441] [<ffffffff81110d19>] ? mnt_clone_write+0x9/0x30 Dec 27 23:00:44 DiskStation kernel: [1894269.447281] [<ffffffff8110d257>] ? file_update_time+0x97/0xf0 Dec 27 23:00:44 DiskStation kernel: [1894269.453328] [<ffffffff810b2bda>] ? __generic_file_aio_write+0x18a/0x3f0 Dec 27 23:00:44 DiskStation kernel: [1894269.460242] [<ffffffff810b2eaa>] ? generic_file_aio_write+0x6a/0xe0 Dec 27 23:00:44 DiskStation kernel: [1894269.466809] [<ffffffff8118a9c8>] ? ext4_file_write+0xc8/0x420 Dec 27 23:00:44 DiskStation kernel: [1894269.472840] [<ffffffff810d9a62>] ? page_add_new_anon_rmap+0x32/0xf0 Dec 27 23:00:45 DiskStation kernel: [1894269.479405] [<ffffffff810d064c>] ? handle_pte_fault+0x8ac/0x920 Dec 27 23:00:45 DiskStation kernel: [1894269.485616] [<ffffffff810eed8b>] ? do_sync_write+0x6b/0xa0 Dec 27 23:00:45 DiskStation kernel: [1894269.491375] [<ffffffff810efd7b>] ? vfs_write+0xcb/0x360 Dec 27 23:00:45 DiskStation kernel: [1894269.496887] [<ffffffff81075d6a>] ? getnstimeofday+0xa/0x30 Dec 27 23:00:45 DiskStation kernel: [1894269.502665] [<ffffffff810f073d>] ? SyS_pwrite64+0x9d/0xb0 Dec 27 23:00:45 DiskStation kernel: [1894269.508371] [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e Dec 27 23:00:45 DiskStation kernel: [1894269.514406] INFO: task Plex Media Serv:25260 blocked for more than 120 seconds. Dec 27 23:00:45 DiskStation kernel: [1894269.521898] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Dec 27 23:00:45 DiskStation kernel: [1894269.537198] ffff88006136fae8 0000000000200086 0000000000000001 ffff88007acd00c0 Dec 27 23:00:45 DiskStation kernel: [1894269.544865] ffff88006136fac8 ffff88005ef2f750 ffff88006136ffd8 ffff88006136ffd8 Dec 27 23:00:45 DiskStation kernel: [1894269.552548] ffff88006136ffd8 ffff88005ef2f750 0000000000200246 ffff88007a82f800 Dec 27 23:00:45 DiskStation kernel: [1894269.560231] Call Trace: Dec 27 23:00:45 DiskStation kernel: [1894269.562887] [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0 Dec 27 23:00:45 DiskStation kernel: [1894269.569198] [<ffffffff81054560>] ? finish_wait+0xa0/0xa0 Dec 27 23:00:45 DiskStation kernel: [1894269.574816] [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150 Dec 27 23:00:45 DiskStation kernel: [1894269.581178] [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80 Dec 27 23:00:45 DiskStation kernel: [1894269.587216] [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240 Dec 27 23:00:45 DiskStation kernel: [1894269.593519] [<ffffffff8110d179>] ? update_time+0x79/0xc0 Dec 27 23:00:45 DiskStation kernel: [1894269.599131] [<ffffffff81110d19>] ? mnt_clone_write+0x9/0x30 Dec 27 23:00:45 DiskStation kernel: [1894269.605005] [<ffffffff8110d257>] ? file_update_time+0x97/0xf0 Dec 27 23:00:45 DiskStation kernel: [1894269.611049] [<ffffffff810b2bda>] ? __generic_file_aio_write+0x18a/0x3f0 Dec 27 23:00:45 DiskStation kernel: [1894269.617959] [<ffffffff810b2eaa>] ? generic_file_aio_write+0x6a/0xe0 Dec 27 23:00:45 DiskStation kernel: [1894269.624510] [<ffffffff8118a9c8>] ? ext4_file_write+0xc8/0x420 Dec 27 23:00:45 DiskStation kernel: [1894269.630549] [<ffffffff810fec4c>] ? filename_lookup.isra.35+0x2c/0x80 Dec 27 23:00:45 DiskStation kernel: [1894269.637183] [<ffffffff811033ad>] ? user_path_at_empty+0x6d/0xc0 Dec 27 23:00:45 DiskStation kernel: [1894269.643386] [<ffffffff810eed8b>] ? do_sync_write+0x6b/0xa0 Dec 27 23:00:45 DiskStation kernel: [1894269.649156] [<ffffffff810efd7b>] ? vfs_write+0xcb/0x360 Dec 27 23:00:45 DiskStation kernel: [1894269.654676] [<ffffffff8102e3d1>] ? sys32_stat64+0x21/0x30 Dec 27 23:00:45 DiskStation kernel: [1894269.660365] [<ffffffff810f059d>] ? SyS_write+0x6d/0xc0 Dec 27 23:00:45 DiskStation kernel: [1894269.665806] [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e Dec 28 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll. Dec 28 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [xxx.synology.me] with IP [xx.x.xx.xx] at [Synology] Voila mes derniers logues depuis le 15 decembre. Je vois surtout un problème de DDns car j'ai un soucis de réseau environnement (vu hier dans EZ-internet). Je vais voir plus tard pour le réglé. Problème car j'ai deux routeurs (livebox + Asus). Pour le usb externe, j'avais essayé d'installer un boitier pour lire mes 6to mais le boitier est trop vieux et ne pouvait pas lire autant donc je l'ai retirer. Je pensais faire une copie des données directement pour réduire mes temps de transfert. Il me reste 2933.6 min avec 21860K/s

Ok ca a bien monté là. Je suis à 18555K/sec. Mon sync_max est repassé à max sur les 3 lignes

DiskStation> echo max > /sys/block/md2/md/sync_max DiskStation> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md2 : active raid6 sda5[0] sde5[4] sdd5[3] sdc5[2] sdb5[1] 11706850944 blocks super 1.2 level 6, 64k chunk, algorithm 2 [5/5] [UUUUU] [>....................] reshape = 0.0% (129524/3902283648) finish=5189873.9min speed=12K/sec md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] sde2[4] 2097088 blocks [5/5] [UUUUU] md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] sde1[4] 2490176 blocks [5/5] [UUUUU] unused devices: <none> Sur un xpenology de HP proliant 4 baies, j'ai fais le test sur le sync_max et j'ai tout en max.