Lao-tseu

Tout a fait patrickh et je rajouterais qu il faut savoir vivre avec le progres . La dsm 3 est mieux que la precedente il faut juste prendre le temps de se faire a la nouvelle interface et meme si quelques petits programmes ont un peu de mal a s adapter a la vers 3 Cela viendra avec le temps Alors un peu de courage et ne perd pas ton temps a downgrader

DSM 3.0 introduit Synology Hybrid RAID (SHR), un type de volume intelligent qui optimise la taille du volume lorsque l'on combine des disques durs de diff

En effet il n y a pas de switch incompatibles il faut cependant s assurer que les cables eux sont compatibles avec le giga donc soit du 5

En effet l usb station me parait sympa mais tu as raison ça na rien a voir avec le disque Iusb2 etc etc

Si j ai bien tout lu c est pas un disque externe usb hein mais plutot un nas usb simplifi

lol deja tu t es assur

C est faux faut pas forcement du 6 pour avoir du gigabit

** SYNOTWEAK V0.2 **7 9 2010, 18:38:7******************** /dev/sda: ATA device, with non-removable media Model Number: ST3500418AS Serial Number: 6VMD6VCV Firmware Revision: CC38 Transport: Serial Standards: Used: unknown (minor revision code 0x0029) Supported: 8 7 6 5 Likely used: 8 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 976773168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 476940 MBytes device size with M = 1000*1000: 500107 MBytes (500 GB) cache/buffer size = 16384 KBytes Nominal Media Rotation Rate: 7200 Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = ? Recommended acoustic management value: 254, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * DOWNLOAD_MICROCODE SET_MAX security extension * Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * WRITE_{DMA|MULTIPLE}_FUA_EXT * 64-bit World wide name Write-Read-Verify feature set * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Phy event counters Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) unknown 206[12] (vendor specific) Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count supported: enhanced erase 76min for SECURITY ERASE UNIT. 76min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 5000c5002247bfd6 NAA : 5 IEEE OUI : 000c50 Unique ID : 02247bfd6 Checksum: correct APM_level = not supported acoustic = 254 (128=quiet ... 254=fast) ******************** /dev/sdb: ATA device, with non-removable media Model Number: ST3500418AS Serial Number: 6VMD6VF6 Firmware Revision: CC38 Transport: Serial Standards: Used: unknown (minor revision code 0x0029) Supported: 8 7 6 5 Likely used: 8 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 976773168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 476940 MBytes device size with M = 1000*1000: 500107 MBytes (500 GB) cache/buffer size = 16384 KBytes Nominal Media Rotation Rate: 7200 Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = ? Recommended acoustic management value: 254, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * DOWNLOAD_MICROCODE SET_MAX security extension * Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * WRITE_{DMA|MULTIPLE}_FUA_EXT * 64-bit World wide name Write-Read-Verify feature set * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Phy event counters Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) unknown 206[12] (vendor specific) Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count supported: enhanced erase 78min for SECURITY ERASE UNIT. 78min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 5000c5002247c474 NAA : 5 IEEE OUI : 000c50 Unique ID : 02247c474 Checksum: correct APM_level = not supported acoustic = 254 (128=quiet ... 254=fast) ******************** ******************** ******************** ******************** ******************** ******************** ******************** ******************** ******************** /dev/sda: setting Advanced Power Management level to disabled APM_level = not supported ******************** /dev/sdb: setting Advanced Power Management level to disabled APM_level = not supported

Ton volume est mort car un de tes disques ta lach

Je pencherais plutot pour une questions de droits et d autorisation meme si j ai moi meme renoncé a comprendre le fonctionnement de ma livebox en achetant un wdlive

Ben moi j aurais plutot r

[ip_syno_interne : 192.168.1.2] c est une adresse fixe que tu as toi m

Un exemple : je clique sur l icône réseau de mon pc. Le nom de mon NAS apparait. Je clique dessus je rentre mon identifiant et mon mot de passe et la je vois tous les dossiers partagés. Si ça fonctionne pas c est soit un problème de groupe genre mshome au lieu de workgroup dans le syno soit un problème de IP Tu as pu mettre 192.168.1.100 pour le nas alors que ton réseau est dans le 192.168.0.XXXX Ton syno doit être accessible exactement au même titre qu un ordinateur voisin Ceci explique cela Si ton reseau est bancal vlc ou autre ne fonctionnera pas ps: par pitié arrête les " po "

tu clikes sur reseau ton nas apparait tu rentres dedans tes dossiers apparaissent et hop