michel1

le 31 mai 2015

Bonjour tout le monde

Je voudrais installer moodle et lors de l'installation il me demande le port de la base de données.

Quelqu'un peut il m'aider; car je ne sais quoi mettre. Ou existe il un tutoriaux ?

Merci

le 31 mars 2014

Bonjour

Quelqu'un à t'il installé fengoffice, car j'ai toujours ce message d'erreur, fengoffice erreur de chargement.

Merci

le 24 mars 2014

Bonjour

J'ai les mêmes problèmes que toi. Mais moi je ne sais pas manipuler les commandes. J'ai créé un répertoire comme toi, mai moi j'ai cette réponse à l'ouverture de la page "Can't write into config directory!

This can usually be fixed by giving the webserver write access to the config directory." Je ne sais pas ce que je dois faire, par contre la base de données owncloud est créé mais il n'y a aucune table.

Merci de votre aide

le 23 mars 2014

Bonjour à tous

J'ai eu la réponse par la hot line synology. Il suffisait de faire un reset pour supprimer les mots de passe. Cela marche j'ai encore des petits problème avec roundcube et owncloud mais dans l'ensemble tout va bien.

J'espère que cela pourra aider d'autres personnes.

Merci

le 17 mars 2014

Bonsoir,

Depuis ma mise à jour vers DSM5 je n'ai plus accès à ma messagerie et tout mes sites Web. J'ai des messages important à récupérer. Le problème vient certainement de mariadb qui bloque l’Accès à phpadmin et je ne peux avoir accès aux bases de données. Quelqu'un aurait il une réponse et comment récupérer mes messages. Merci

le 16 février 2014

Bonsoir

Oui 'jy suis arrivé. J'ai crée une base de donnée dans phpadmin que j'ai nommée agora, ensuite j'ai copié agora dans le dossier web de mon syno. J'ai ouvert mon navigateur à l'adresse de mon syno/agora. Là il m'indique une erreur mysql je n'en tient pas compte. Je poursuit l'installation en indiquant mon nom administrateur et mot de passe de phpadmin en restant en localhost et la base de donnée se remplit toute seule. J'ai acces à agora sans problème.

J'espère avoir été assez clair car je suis novice.

Merci

le 24 janvier 2014

Bonjour Domlas

Merci pour ta réponse. Mais pour moi le problème est la base de donnée et je n'y connais rien. C'est pour cela que je demande l'aide pour la créer. De plus il faut deplacer un dossier dont le site pointeras dessus et je suppose sera là ou je sauvegarderais mes informations de genealogie.

Alors merci pour ceux qui peuvent m'aider

le 24 janvier 2014

bonjour tout le monde

Je voudrais installe phpgedview. Je l'ai copié dans mon dossier web mais après je ne sais pas comment faire. Il faudrait que je craie une base de donnée et que je déplace le fichier index mais je connais pas la procédure.

Quelqu'un peut il m'aider.

Merci

le 24 janvier 2014

Bonjour pluton

J'ai essayé mais je n'y comprends rien et je n'ai toujours pas de calendrier.

Tu n'as pas une explication en français

Merci

le 23 janvier 2014

Bonjour tous le monde

Comment fait on pour installer un plugin calendrier et filtre des messages sur roundcube. J'ai la version 0.95

Merci

le 22 janvier 2014

Bonjour tout le monde

J'ai ce message d'erreur sur owncloud: Votre dossier de données et vos fichiers sont probablement accessibles depuis internet. Le fichier .htaccess ne fonctionne pas. Nous vous recommandons vivement de configurer votre serveur web de façon à ce que ce dossier de données ne soit plus accessible, ou bien de le déplacer à l'extérieur de la racine du serveur web.

Quelqu'un peut me dire ce que je dois faire?

Merci

le 22 janvier 2014

Bonjour

Agora project est un espace ou tu peux partager avec ton equipe tes agendas, tes contacts, tes fichiers, forums, messagerie instantannée. Voici leur site: http://www.agora-project.net. Jaimerais bien le tester sur mon syno. mais je ne sais pas l'installer.

Merci

le 22 janvier 2014

Bonjour tout le monde

Je voudrais installer agora project sur mon ds713+ mais il faut crer une base de données mysql.

Ne touchant pas à cela car je n'y connais rien. Quelqu'un pourrait il me donner la méthode pour installer agora.

Merci

le 9 février 2013

Bonjour à tous,

J'aimerais savoir comment avoir acces aux site de chaque utilisateur et si je peux leur donner un nom

Merci

le 6 février 2013

Bonjour

Je n'ai plus acces non plus a mailstation et je pense que c'est dut à zarafa. Je l'ai désinstallé et toujours le même probleme.

Peux-tu me dire comment tu as solutionné ce problème en me donnant la marche à suivre, car je ne connais rien en commende et je ne sais ou il faut les taper.

Merci

le 1 février 2013

Bonjour,

Merci à tous ceux qui ont voulut m'aider. Mon problème est résolu. Je pense que cela venait du mot de passe. Celui de l'administrateur était avec plusieurs signe bizarre. Je l'ai changé par que des lettres et depuis j'ai acces à roundcube.

Merci pour votre aide

le 26 décembre 2012

bonsoir

merci pour la réponse, mais qu'elle serait la solution pour résoudre mon problème. Où aurais je fais une erreur dans l'installation?

Je sens que vais être obliger de tout réinstaller

le 20 décembre 2012

Bonjour,

Désolé de mon retard de réponse mais beaucoup d'occupation.

Voici la réponse de la premier commande:

tcp 0 0 0.0.0.0:49152 tcp 0 0 0.0.0.0:161 tcp 0 0 127.0.0.1:7330 tcp 0 0 0.0.0.0:3306 tcp 0 0 0.0.0.0:139 tcp 0 0 0.0.0.0:34668 tcp 0 0 0.0.0.0:236 tcp 0 0 0.0.0.0:9005 tcp 0 0 0.0.0.0:110 tcp 0 0 127.0.0.1:783 tcp 0 0 0.0.0.0:143 tcp 0 0 0.0.0.0:32400 tcp 0 0 0.0.0.0:8080 tcp 0 0 0.0.0.0:465 tcp 0 0 0.0.0.0:50001 tcp 0 0 0.0.0.0:50002 tcp 0 0 0.0.0.0:64179 tcp 0 0 0.0.0.0:32469 tcp 0 0 0.0.0.0:21 tcp 0 0 0.0.0.0:22 tcp 0 0 0.0.0.0:631 tcp 0 0 0.0.0.0:5432 tcp 0 0 0.0.0.0:25 tcp 0 0 127.0.0.1:4700 tcp 0 0 0.0.0.0:445 tcp 0 0 ::%135354538:161 tcp 0 0 ::%135354538:515 tcp 0 0 ::%135354538:548 tcp 0 0 ::%135354538:5000 tcp 0 0 ::%135354538:5001 tcp 0 0 ::%135354538:139 tcp 0 0 ::%135354538:5005 tcp 0 0 ::%135354538:5006 tcp 0 0 ::%135354538: 0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
src="emoticons/aqua_mega_shok.gif" alt="80"> ::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN

La deuxieme commande:

...tore/webconsole/app/wc_work> ps |grep dovecot

16497 root 2536 S sh -c ps |grep dovecot 2>&1
16499 root 2540 R grep dovecot

Petite question pour moi c'est quoi dovecot?

J'espere que cela va vous aider pour me donner une réponse a mon problème.

Merci

le 7 décembre 2012

Bonsoir Pluton

voici ce que cela donne

...tore/webconsole/app/wc_work> > var/log/messages
...tore/webconsole/app/wc_work> cat /var/log/messages
Dec 6 07:01:57 hotplugd: DEVPATH:2-1
Dec 6 07:01:57 hotplugd: SUBSYSTEM:usb
Dec 6 07:01:57 hotplugd: external_disk_port_check.c:280 device path should not be NULL
Dec 6 07:01:57 hotplugd: ##### ACTION:add
Dec 6 07:01:57 hotplugd: DEVICE:/proc/bus/usb/002/002
Dec 6 07:01:57 hotplugd: DEVPATH:2-1:1.0
Dec 6 07:01:57 hotplugd: SUBSYSTEM:usb
Dec 6 07:01:57 hotplugd: INTERFACE:8/6/80
Dec 6 07:01:57 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 6 07:01:57 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
Dec 6 07:02:10 root: Syslog Server updater start
Dec 6 07:02:55 root: Cloud Station updater: Upgrade database
Dec 6 07:02:55 root: Cloud Station updater: Upgrading user database
Dec 6 07:02:55 root: Cloud Station updater: Upgrading user database: successful
Dec 6 07:02:55 root: Cloud Station updater: start upgrade data db
Dec 6 07:02:55 root: Cloud Station updater: start upgrade server db
Dec 6 07:02:55 root: Cloud Station updater: start move db
Dec 6 07:02:55 root: moving old client DB for
Dec 6 07:02:55 root: all volume: /volume1
Dec 6 07:02:55 root: create /volume1/@tmp/@cstn-share.10797
Dec 6 07:02:55 root: moving old client OK
Dec 6 07:02:55 root: CS: [start.sh]: Cloud station start...
Dec 6 07:03:36 scheduler: scheduler.c:315 Failed to get value of download_schedule
Dec 6 07:03:36 scheduler: scheduler.c:322 Failed to get value of download_amule_schedule
Dec 6 07:03:48 scemd: scemd.c:413 stop manutild.
Dec 6 07:03:48 scemd: scemd.c:413 stop manutild.
Dec 6 23:00:01 scemd: scemd.c:287 receive SIGTERM
Dec 6 23:00:02 supervise/syslog-ng[8471]: Daemon exited gracefully, not restarting; exitcode='0'
Dec 6 23:00:32 root: CS: [start.sh]: Cloud station stop...
Dec 6 23:00:32 synoaudiod: synoaudiod.cpp:1078 synoaudiod exit
Dec 6 23:00:45 scheduler: scheduler.c (1744) Got signal. Die gracefully.
Dec 6 23:00:48 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Dec 6 23:00:49 synorelayd[6862]: request.cpp:79 curl_share_cleanup failed
Dec 6 23:00:49 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 6 23:00:49 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
Dec 6 23:00:51 synorelayd[6862]: request.cpp:79 curl_share_cleanup failed
Dec 6 23:00:51 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 6 23:00:51 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
killall: synolunbkp: no process killed
Dec 6 23:01:01 supervise/syslog-ng[7037]: Daemon exited gracefully, not restarting; exitcode='0'
Dec 6 23:01:06 synorelayd[6862]: synorelayd.cpp:909 get signal, logout
Dec 6 23:01:06 synorelayd[6862]: synorelayd.cpp:1148 stoped
Dec 6 23:01:09 dhcpcd[3086]: terminating on signal 15
Dec 6 23:01:09 syslogd exiting
Dec 7 07:01:37 syslogd started: BusyBox v1.16.1
Dec 7 07:01:38 spacetool: spacetool.c:2463 [info] Old vg path: [/dev/vg1000], New vg path: [/dev/vg1000], UUID: [1SgDjF-kFWN-SKcF-eU3q-15Cu-jKPm-ezKTOc]
Dec 7 07:01:38 spacetool: spacetool.c:2470 [info] Activate all VG
Dec 7 07:01:38 dhcpcd[3086]: dhcpReboot: do not want cache
Dec 7 07:01:38 spacetool: spacetool.c:2481 Activate LVM [/dev/vg1000]
Dec 7 07:01:39 synovspace: vspace_wrapper_load_all.c:75 [iNFO] The mount device path of space [/volume1] is [/dev/vg1000/lv]
Dec 7 07:01:41 synologset1: log_syslog_send.c:134 Error connecting to target server: Connection refused
Dec 7 07:01:41 synologset1: log_set1.c:332 Fail to send syslog to remote server.
Dec 7 07:01:46 scemd: scemd.c:154 fan_type=6, raid_type=1, led_type=1, thermal_type=1, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=1, fan_number=1, eunit_pwron_type=1, pis_type=1, rtc_type=3, lcm_type=2, wifi_wps_type=0
Dec 7 07:01:47 scemd: modules/fan_speed_adjust_common.c:118 Type: INTERNAL Fan Mode: LOW
Dec 7 07:01:48 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 2, designed disks 2
Dec 7 07:01:48 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 2, designed disks 2
Dec 7 07:01:48 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20
Dec 7 07:01:48 scemd: modules/disk_hibernation.c:1817 SATA Deep sleep timer 1
Dec 7 07:01:48 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0
Dec 7 07:01:48 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.
Dec 7 07:01:48 scemd: modules/scemd_connector.c:103 scemd connector thread start.
Dec 7 07:01:48 scemd: scemd.c:154 fan_type=6, raid_type=1, led_type=1, thermal_type=1, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=1, fan_number=1, eunit_pwron_type=1, pis_type=1, rtc_type=3, lcm_type=2, wifi_wps_type=0
Dec 7 07:01:48 scemd: scemd.c:353 WIFI/WPS button is not support on this model.
Dec 7 07:01:48 kernel: [ 63.356363] xhci_hcd 0000:04:00.0: Etron chip found.
Dec 7 07:01:48 kernel: [ 63.367251] xhci_hcd 0000:04:00.0: Failed to enable MSI-X
Dec 7 07:01:48 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Dec 7 07:01:49 syno_hdd_util: Model:[WD10EFRX-68JCSN0], Firmware:[01.01A01], S/N:[WD-WMC1U5310048] in [/dev/sdb] is not ssd
Dec 7 07:01:49 syno_hdd_util: Model:[WD10EFRX-68JCSN0], Firmware:[01.01A01], S/N:[WD-WMC1U5310411] in [/dev/sda] is not ssd
Dec 7 07:01:50 kernel: [ 64.826474] sd 7:0:0:0: [synoboot] Asking for cache data failed
Dec 7 07:01:50 kernel: [ 64.832579] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
Dec 7 07:01:50 kernel: [ 64.841091] sd 7:0:0:0: [synoboot] Asking for cache data failed
Dec 7 07:01:50 kernel: [ 64.847081] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
Dec 7 07:01:50 kernel: [ 64.984930] GPT:Primary header thinks Alt. header is not at the end of the disk.
Dec 7 07:01:50 kernel: [ 64.992342] GPT:225279 != 250879
Dec 7 07:01:50 kernel: [ 64.995577] GPT:Alternate GPT header not at the end of the disk.
Dec 7 07:01:50 kernel: [ 65.001623] GPT:225279 != 250879
Dec 7 07:01:50 kernel: [ 65.004855] GPT: Use GNU Parted to correct GPT errors.
Dec 7 07:01:50 kernel: [ 65.017383] sd 7:0:0:0: [synoboot] Asking for cache data failed
Dec 7 07:01:50 kernel: [ 65.023367] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
Dec 7 07:01:50 synocheckshare: Fix shares in smb.conf.
Dec 7 07:01:54 synousbdisk: RCClean succeeded
Dec 7 07:01:54 synosata: synosata.c:152 no external sata devices granted
Dec 7 07:01:56 ddnsd: main(ddnsd.c:3006): not enable DDNS, shutdown daemon
Dec 7 07:01:56 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1a.7
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/001/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb1
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1a.7
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/001/001
Dec 7 07:01:56 hotplugd: DEVPATH:1-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:1d.7
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/002/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb2
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb2
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb2, /proc/bus/usb/002/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:1d.7
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/002/001
Dec 7 07:01:56 hotplugd: DEVPATH:2-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:04:00.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/003/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb3
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb3
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb3, /proc/bus/usb/003/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:04:00.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/003/001
Dec 7 07:01:56 hotplugd: DEVPATH:3-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0003:0000:04:00.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/004/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb4
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb4
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb4, /proc/bus/usb/004/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0003:0000:04:00.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/004/001
Dec 7 07:01:56 hotplugd: DEVPATH:4-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:1a.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/005/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb5
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb5
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb5, /proc/bus/usb/005/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:1a.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/005/001
Dec 7 07:01:56 hotplugd: DEVPATH:5-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:1d.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/006/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb6
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb6
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb6, /proc/bus/usb/006/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:1d.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/006/001
Dec 7 07:01:56 hotplugd: DEVPATH:6-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:1d.1
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/007/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb7
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb7
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb7, /proc/bus/usb/007/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:1d.1
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/007/001
Dec 7 07:01:56 hotplugd: DEVPATH:7-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/008/001, usbid=1d6b:0001:0000:00:1d.2
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/008/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb8
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb8
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb8, /proc/bus/usb/008/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/008/001, usbid=1d6b:0001:0000:00:1d.2
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/008/001
Dec 7 07:01:56 hotplugd: DEVPATH:8-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/002/002
Dec 7 07:01:56 hotplugd: DEVPATH:2-1
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: external_disk_port_check.c:280 device path should not be NULL
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/002/002
Dec 7 07:01:56 hotplugd: DEVPATH:2-1:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:8/6/80
Dec 7 07:01:56 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 7 07:01:56 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
Dec 7 07:02:10 root: Syslog Server updater start
Dec 7 07:02:54 root: Cloud Station updater: Upgrade database
Dec 7 07:02:54 root: Cloud Station updater: Upgrading user database
Dec 7 07:02:54 root: Cloud Station updater: Upgrading user database: successful
Dec 7 07:02:54 root: Cloud Station updater: start upgrade data db
Dec 7 07:02:54 root: Cloud Station updater: start upgrade server db
Dec 7 07:02:54 root: Cloud Station updater: start move db
Dec 7 07:02:55 root: moving old client DB for
Dec 7 07:02:55 root: all volume: /volume1
Dec 7 07:02:55 root: create /volume1/@tmp/@cstn-share.10814
Dec 7 07:02:55 root: moving old client OK
Dec 7 07:02:55 root: CS: [start.sh]: Cloud station start...
Dec 7 07:03:37 scheduler: scheduler.c:315 Failed to get value of download_schedule
Dec 7 07:03:37 scheduler: scheduler.c:322 Failed to get value of download_amule_schedule
Dec 7 07:03:48 scemd: scemd.c:413 stop manutild.
Dec 7 07:03:48 scemd: scemd.c:413 stop manutild.
Dec 7 08:38:40 scemd: scemd.c:225 stop manutild.
Dec 7 09:02:48 synorelayd[6862]: synorelayd.cpp:942 get sigpipe
Dec 7 09:02:57 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 7 09:02:57 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
Dec 7 23:00:02 scemd: scemd.c:287 receive SIGTERM
Dec 7 23:00:02 supervise/syslog-ng[8781]: Daemon exited gracefully, not restarting; exitcode='0'
Dec 7 23:00:26 root: CS: [start.sh]: Cloud station stop...
Dec 7 23:00:26 synoaudiod: synoaudiod.cpp:1078 synoaudiod exit
Dec 7 23:00:38 scheduler: scheduler.c (1744) Got signal. Die gracefully.
Dec 7 23:00:40 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Dec 7 23:00:41 synorelayd[6862]: request.cpp:79 curl_share_cleanup failed
Dec 7 23:00:41 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 7 23:00:41 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
Dec 7 23:00:43 synorelayd[6862]: request.cpp:79 curl_share_cleanup failed
Dec 7 23:00:43 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 7 23:00:43 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
killall: synolunbkp: no process killed
Dec 7 23:00:53 supervise/syslog-ng[7034]: Daemon exited gracefully, not restarting; exitcode='0'
Dec 7 23:00:58 synorelayd[6862]: synorelayd.cpp:909 get signal, logout
Dec 7 23:00:58 synorelayd[6862]: synorelayd.cpp:1148 stoped
Dec 7 23:01:00 syslogd exiting
Dec 7 23:39:41 syslogd started: BusyBox v1.16.1
Dec 7 23:39:42 dhcpcd[3086]: dhcpReboot: do not want cache
Dec 7 23:39:42 spacetool: spacetool.c:2463 [info] Old vg path: [/dev/vg1000], New vg path: [/dev/vg1000], UUID: [1SgDjF-kFWN-SKcF-eU3q-15Cu-jKPm-ezKTOc]
Dec 7 23:39:42 spacetool: spacetool.c:2470 [info] Activate all VG
Dec 7 23:39:42 spacetool: spacetool.c:2481 Activate LVM [/dev/vg1000]
Dec 7 23:39:43 synovspace: vspace_wrapper_load_all.c:75 [iNFO] The mount device path of space [/volume1] is [/dev/vg1000/lv]
Dec 7 23:39:45 synologset1: log_syslog_send.c:134 Error connecting to target server: Connection refused
Dec 7 23:39:45 synologset1: log_set1.c:332 Fail to send syslog to remote server.
Dec 7 23:39:51 scemd: scemd.c:154 fan_type=6, raid_type=1, led_type=1, thermal_type=1, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=1, fan_number=1, eunit_pwron_type=1, pis_type=1, rtc_type=3, lcm_type=2, wifi_wps_type=0
Dec 7 23:39:51 scemd: modules/fan_speed_adjust_common.c:118 Type: INTERNAL Fan Mode: LOW
Dec 7 23:39:52 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 2, designed disks 2
Dec 7 23:39:52 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 2, designed disks 2
Dec 7 23:39:52 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20
Dec 7 23:39:52 scemd: modules/disk_hibernation.c:1817 SATA Deep sleep timer 1
Dec 7 23:39:52 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0
Dec 7 23:39:52 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.
Dec 7 23:39:52 scemd: modules/scemd_connector.c:103 scemd connector thread start.
Dec 7 23:39:52 scemd: scemd.c:154 fan_type=6, raid_type=1, led_type=1, thermal_type=1, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=1, fan_number=1, eunit_pwron_type=1, pis_type=1, rtc_type=3, lcm_type=2, wifi_wps_type=0
Dec 7 23:39:52 scemd: scemd.c:353 WIFI/WPS button is not support on this model.
Dec 7 23:39:52 kernel: [ 62.911896] xhci_hcd 0000:04:00.0: Etron chip found.
Dec 7 23:39:52 kernel: [ 62.922736] xhci_hcd 0000:04:00.0: Failed to enable MSI-X
Dec 7 23:39:53 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Dec 7 23:39:53 syno_hdd_util: Model:[WD10EFRX-68JCSN0], Firmware:[01.01A01], S/N:[WD-WMC1U5310048] in [/dev/sdb] is not ssd
Dec 7 23:39:53 syno_hdd_util: Model:[WD10EFRX-68JCSN0], Firmware:[01.01A01], S/N:[WD-WMC1U5310411] in [/dev/sda] is not ssd
Dec 7 23:39:54 kernel: [ 64.342379] sd 7:0:0:0: [synoboot] Asking for cache data failed
Dec 7 23:39:54 kernel: [ 64.348424] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
Dec 7 23:39:54 kernel: [ 64.357087] sd 7:0:0:0: [synoboot] Asking for cache data failed
Dec 7 23:39:54 kernel: [ 64.363051] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
Dec 7 23:39:54 kernel: [ 64.500933] GPT:Primary header thinks Alt. header is not at the end of the disk.
Dec 7 23:39:54 kernel: [ 64.508358] GPT:225279 != 250879
Dec 7 23:39:54 kernel: [ 64.511871] GPT:Alternate GPT header not at the end of the disk.
Dec 7 23:39:54 kernel: [ 64.517893] GPT:225279 != 250879
Dec 7 23:39:54 kernel: [ 64.522519] GPT: Use GNU Parted to correct GPT errors.
Dec 7 23:39:54 kernel: [ 64.535911] sd 7:0:0:0: [synoboot] Asking for cache data failed
Dec 7 23:39:54 kernel: [ 64.541889] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
Dec 7 23:39:55 synocheckshare: Fix shares in smb.conf.
Dec 7 23:39:59 synousbdisk: RCClean succeeded
Dec 7 23:39:59 synosata: synosata.c:152 no external sata devices granted
Dec 7 23:40:01 ddnsd: main(ddnsd.c:3006): not enable DDNS, shutdown daemon
Dec 7 23:40:01 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1a.7
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/001/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb1
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1a.7
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/001/001
Dec 7 23:40:01 hotplugd: DEVPATH:1-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:1d.7
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/002/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb2
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb2
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb2, /proc/bus/usb/002/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:1d.7
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/002/001
Dec 7 23:40:01 hotplugd: DEVPATH:2-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:04:00.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/003/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb3
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb3
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb3, /proc/bus/usb/003/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:04:00.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/003/001
Dec 7 23:40:01 hotplugd: DEVPATH:3-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0003:0000:04:00.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/004/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb4
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb4
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb4, /proc/bus/usb/004/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0003:0000:04:00.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/004/001
Dec 7 23:40:01 hotplugd: DEVPATH:4-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:1a.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/005/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb5
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb5
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb5, /proc/bus/usb/005/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:1a.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/005/001
Dec 7 23:40:01 hotplugd: DEVPATH:5-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:1d.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/006/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb6
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb6
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb6, /proc/bus/usb/006/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:1d.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/006/001
Dec 7 23:40:01 hotplugd: DEVPATH:6-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:1d.1
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/007/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb7
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb7
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb7, /proc/bus/usb/007/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:1d.1
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/007/001
Dec 7 23:40:01 hotplugd: DEVPATH:7-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/008/001, usbid=1d6b:0001:0000:00:1d.2
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/008/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb8
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb8
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb8, /proc/bus/usb/008/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/008/001, usbid=1d6b:0001:0000:00:1d.2
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/008/001
Dec 7 23:40:01 hotplugd: DEVPATH:8-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/002/002
Dec 7 23:40:01 hotplugd: DEVPATH:2-1
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: external_disk_port_check.c:280 device path should not be NULL
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/002/002
Dec 7 23:40:01 hotplugd: DEVPATH:2-1:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:8/6/80
Dec 7 23:40:02 synorelayd[6861]: request_alias.cpp:119 alias name is not string or empty
Dec 7 23:40:02 synorelayd[6861]: synorelayd.cpp:684 failed to get request for keep alive
Dec 7 23:40:14 root: Syslog Server updater start
Dec 7 23:40:58 root: Cloud Station updater: Upgrade database
Dec 7 23:40:58 root: Cloud Station updater: Upgrading user database
Dec 7 23:40:58 root: Cloud Station updater: Upgrading user database: successful
Dec 7 23:40:59 root: Cloud Station updater: start upgrade data db
Dec 7 23:40:59 root: Cloud Station updater: start upgrade server db
Dec 7 23:40:59 root: Cloud Station updater: start move db
Dec 7 23:40:59 root: moving old client DB for
Dec 7 23:40:59 root: all volume: /volume1
Dec 7 23:40:59 root: create /volume1/@tmp/@cstn-share.10805
Dec 7 23:40:59 root: moving old client OK
Dec 7 23:40:59 root: CS: [start.sh]: Cloud station start...
Dec 7 23:41:41 scheduler: scheduler.c:315 Failed to get value of download_schedule
Dec 7 23:41:41 scheduler: scheduler.c:322 Failed to get value of download_amule_schedule
Dec 7 23:41:52 scemd: scemd.c:413 stop manutild.
Dec 7 23:41:52 scemd: scemd.c:413 stop manutild.
Dec 7 23:54:02 PkgSynoMan.cgi: PkgSynoMan.cpp:893 Failed to mkdir pkglist.tmp, File exists
Dec 8 00:03:58 PkgSynoMan.cgi: PkgSynoMan.cpp:345 Failed to curl perform, code=18, err=Transferred a partial file
...tore/webconsole/app/wc_work>

le 7 décembre 2012

bonjour,

Désolé mais je ne sais pas comment faire. J'ai essaye de me connecter sur roundcube, puis j'ai ouvert à nouveau une console avec putty et j'ai la même réponse de la derniere fois.

Je ne suis pas connaisseur avec les consoles, alors soit vous abandonnez ou vous m'expliquez

Merci

le 4 décembre 2012

Dec 4 07:01:46 scemd: modules/fan_speed_adjust_common.c:118 Type: INTERNAL Fan Mode: LOW

Dec 4 07:01:48 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 2, designed disks 2

Dec 4 07:01:48 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 2, designed disks 2

Dec 4 07:01:48 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20

Dec 4 07:01:48 scemd: modules/disk_hibernation.c:1817 SATA Deep sleep timer 1

Dec 4 07:01:48 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0

Dec 4 07:01:48 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.

Dec 4 07:01:48 scemd: modules/scemd_connector.c:103 scemd connector thread start.

Dec 4 07:01:48 scemd: scemd.c:154 fan_type=6, raid_type=1, led_type=1, thermal_type=1, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=1, fan_number=1, eunit_pwron_type=1, pis_type=1, rtc_type=3, lcm_type=2, wifi_wps_type=0

Dec 4 07:01:48 scemd: scemd.c:353 WIFI/WPS button is not support on this model.

Dec 4 07:01:48 kernel: [ 63.625379] xhci_hcd 0000:04:00.0: Etron chip found.

Dec 4 07:01:48 kernel: [ 63.636411] xhci_hcd 0000:04:00.0: Failed to enable MSI-X

Dec 4 07:01:48 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id

Dec 4 07:01:48 syno_hdd_util: Model:[WD10EFRX-68JCSN0], Firmware:[01.01A01], S/N:[WD-WMC1U5310048] in [/dev/sdb] is not ssd

Dec 4 07:01:49 syno_hdd_util: Model:[WD10EFRX-68JCSN0], Firmware:[01.01A01], S/N:[WD-WMC1U5310411] in [/dev/sda] is not ssd

Dec 4 07:01:49 kernel: [ 65.059813] sd 7:0:0:0: [synoboot] Asking for cache data failed

Dec 4 07:01:49 kernel: [ 65.059821] sd 7:0:0:0: [synoboot] Assuming drive cache: write through

Dec 4 07:01:49 kernel: [ 65.063558] sd 7:0:0:0: [synoboot] Asking for cache data failed

Dec 4 07:01:49 kernel: [ 65.063564] sd 7:0:0:0: [synoboot] Assuming drive cache: write through

Dec 4 07:01:49 kernel: [ 65.194874] GPT:Primary header thinks Alt. header is not at the end of the disk.

Dec 4 07:01:49 kernel: [ 65.202287] GPT:225279 != 250879

Dec 4 07:01:49 kernel: [ 65.205526] GPT:Alternate GPT header not at the end of the disk.

Dec 4 07:01:49 kernel: [ 65.211556] GPT:225279 != 250879

Dec 4 07:01:49 kernel: [ 65.214809] GPT: Use GNU Parted to correct GPT errors.

Dec 4 07:01:49 kernel: [ 65.227470] sd 7:0:0:0: [synoboot] Asking for cache data failed

Dec 4 07:01:49 kernel: [ 65.233452] sd 7:0:0:0: [synoboot] Assuming drive cache: write through

Dec 4 07:01:50 synocheckshare: Fix shares in smb.conf.

Dec 4 07:01:54 synousbdisk: RCClean succeeded

Dec 4 07:01:54 synosata: synosata.c:152 no external sata devices granted

Dec 4 07:01:56 ddnsd: main(ddnsd.c:3006): not enable DDNS, shutdown daemon

Dec 4 07:01:56 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting

Dec 4 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1a.7

Dec 4 07:01:56 hotplugd: ##### ACTION:add

Dec 4 07:01:56 hotplugd: DEVICE:/proc/bus/usb/001/001

Dec 4 07:01:56 hotplugd: DEVPATH:usb1

Dec 4 07:01:56 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb1

Dec 4 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )

Dec 4 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1a.7

Dec 4 07:01:56 hotplugd: ##### ACTION:add

Dec 4 07:01:56 hotplugd: DEVICE:/proc/bus/usb/001/001

Dec 4 07:01:56 hotplugd: DEVPATH:1-0:1.0

Dec 4 07:01:56 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:56 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:1d.7

Dec 4 07:01:56 hotplugd: ##### ACTION:add

Dec 4 07:01:56 hotplugd: DEVICE:/proc/bus/usb/002/001

Dec 4 07:01:56 hotplugd: DEVPATH:usb2

Dec 4 07:01:56 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb2

Dec 4 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb2, /proc/bus/usb/002/001, add, , )

Dec 4 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:1d.7

Dec 4 07:01:56 hotplugd: ##### ACTION:add

Dec 4 07:01:56 hotplugd: DEVICE:/proc/bus/usb/002/001

Dec 4 07:01:56 hotplugd: DEVPATH:2-0:1.0

Dec 4 07:01:56 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:56 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:04:00.0

Dec 4 07:01:56 hotplugd: ##### ACTION:add

Dec 4 07:01:56 hotplugd: DEVICE:/proc/bus/usb/003/001

Dec 4 07:01:56 hotplugd: DEVPATH:usb3

Dec 4 07:01:56 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb3

Dec 4 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb3, /proc/bus/usb/003/001, add, , )

Dec 4 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:04:00.0

Dec 4 07:01:56 hotplugd: ##### ACTION:add

Dec 4 07:01:56 hotplugd: DEVICE:/proc/bus/usb/003/001

Dec 4 07:01:56 hotplugd: DEVPATH:3-0:1.0

Dec 4 07:01:56 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:56 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0003:0000:04:00.0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/004/001

Dec 4 07:01:57 hotplugd: DEVPATH:usb4

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb4

Dec 4 07:01:57 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb4, /proc/bus/usb/004/001, add, , )

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0003:0000:04:00.0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/004/001

Dec 4 07:01:57 hotplugd: DEVPATH:4-0:1.0

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:1a.0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/005/001

Dec 4 07:01:57 hotplugd: DEVPATH:usb5

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb5

Dec 4 07:01:57 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb5, /proc/bus/usb/005/001, add, , )

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:1a.0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/005/001

Dec 4 07:01:57 hotplugd: DEVPATH:5-0:1.0

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:1d.0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/006/001

Dec 4 07:01:57 hotplugd: DEVPATH:usb6

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb6

Dec 4 07:01:57 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb6, /proc/bus/usb/006/001, add, , )

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:1d.0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/006/001

Dec 4 07:01:57 hotplugd: DEVPATH:6-0:1.0

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:1d.1

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/007/001

Dec 4 07:01:57 hotplugd: DEVPATH:usb7

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb7

Dec 4 07:01:57 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb7, /proc/bus/usb/007/001, add, , )

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:1d.1

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/007/001

Dec 4 07:01:57 hotplugd: DEVPATH:7-0:1.0

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/008/001, usbid=1d6b:0001:0000:00:1d.2

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/008/001

Dec 4 07:01:57 hotplugd: DEVPATH:usb8

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb8

Dec 4 07:01:57 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb8, /proc/bus/usb/008/001, add, , )

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/008/001, usbid=1d6b:0001:0000:00:1d.2

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/008/001

Dec 4 07:01:57 hotplugd: DEVPATH:8-0:1.0

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/002/002

Dec 4 07:01:57 hotplugd: DEVPATH:2-1

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: external_disk_port_check.c:280 device path should not be NULL

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/002/002

Dec 4 07:01:57 hotplugd: DEVPATH:2-1:1.0

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: INTERFACE:8/6/80

Dec 4 07:01:57 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty

Dec 4 07:01:57 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive

Dec 4 07:02:09 root: Syslog Server updater start

Dec 4 07:02:53 root: Cloud Station updater: Upgrade database

Dec 4 07:02:53 root: Cloud Station updater: Upgrading user database

Dec 4 07:02:53 root: Cloud Station updater: Upgrading user database: successful

Dec 4 07:02:53 root: Cloud Station updater: start upgrade data db

Dec 4 07:02:53 root: Cloud Station updater: start upgrade server db

Dec 4 07:02:53 root: Cloud Station updater: start move db

Dec 4 07:02:53 root: moving old client DB for

Dec 4 07:02:53 root: all volume: /volume1

Dec 4 07:02:53 root: create /volume1/@tmp/@cstn-share.10814

Dec 4 07:02:53 root: moving old client OK

Dec 4 07:02:54 root: CS: [start.sh]: Cloud station start...

Dec 4 07:03:36 scheduler: scheduler.c:315 Failed to get value of download_schedule

Dec 4 07:03:36 scheduler: scheduler.c:322 Failed to get value of download_amule_schedule

Dec 4 07:03:48 scemd: scemd.c:413 stop manutild.

Dec 4 09:10:30 scemd: scemd.c:225 stop manutild.

Bonjour

Voici la réponse de la commande. J'espere avoir réussit à tout copier.

Merci

le 27 novembre 2012

bonjour,

Je veux bien faire ce que vous me demander mais comme dit catimini je suis novice et je ne sais pas le faire.

Alors où dois je taper cette commande.

Merci

le 27 novembre 2012

bonjour,

oui j'ai fait attention j'ai meme fait un reset du syno pour annuler les mots de passe et toujours impossible de se connecter sur roundcube. Je pense que j'ai fait un mauvais reglage dans le syno, certainnement dans le serveur messagerie. Si quelqu'un avait un tuto ce serait bien.

Merci pour ta réponse

le 27 novembre 2012

bonjour,

a ma part donner des leçons de morale il y a t'il quelqu'un pour m'aiguiller.

merci

le 25 novembre 2012

Bonjour,

Je ne m'énerve pas. Mon clavier m indique pas quand je suis en majuscule et dès fois il est trop tard quand je m'en aperçois.

oui j'ai activé le service d'accueil utilisateur. Je suis sur dsm4.1. Avant sur mon ancien syno j'avais dsm3.1 et je n'ai pas eu de souci avec roundcube. Sur celui-là je ne comprend pas seul roundcube n'accepte pas mon mot de passe. Sur photostation pas de soucis. Peut etre cela vient du serveur de messagerie que j'aurais mal parametre. Tout en sachant que je suis sur free et que j'utilise le reverse dnd de free.

Merci si quelqu'un peut m'aider

Connexion

michel1

Compteur de contenus

Inscription

Dernière visite

Type de contenu

Profils

Forums

Calendrier

Blogs

Messages posté(e)s par michel1

moodle 2.8.5

Fengoffice

Paquet Owncloud V6.0.1-2 - Installation

Dsm5+Mariadb

Dsm5+Mariadb

Installer Agora

Phpgedview

Phpgedview

Roundcube Et Plugin

Roundcube Et Plugin

Owncloud Message D'erreur

Installer Agora

Installer Agora

Comment Rederiger Ses Sites Sur Son Syno

Ds411J - Instabilit

Mailstation2

Mailstation2

Mailstation2

Mailstation2

Mailstation2

Mailstation2

Mailstation2

Mailstation2

Mailstation2

Mailstation2

Forum

Discussions

Articles

Information importante