This site uses cookies! Learn More

Ce site utilise des cookies !

En continuant à utiliser ce site, vous vous engagez à nous permettre de stocker des cookies sur votre ordinateur.

 

Si nous utilisons des cookies et retenons des données anonymes, c’est pour nous aider à mieux gérer notre mesure d’audience, aider nos partenaires commerciaux à nous rémunérer et nos partenaires publicitaires à proposer des annonces qui vous correspondent.

 

Grâce à ces cookies, le forum est en mesure de savoir qui écrit un message et utile pour le système d'authentification.

 

En cliquant sur « J'accepte », vous acceptez l'utilisation par NAS-Forum de cookies publicitaires et de mesure d'audience fine.

cocolabombe0

augmentation espace

Messages recommandés

Ben chez moi suis a 15000 il me semble et je modifie la valeur qd je modifie le raid et que jytilise pas le nas pour aller plus vite

Mais retomber a 0 ça sent très mauvais

Fait un dmesg et un cat /var/log/messages pour voir si tu voit rien d'anormal

Partager ce message


Lien à poster
Partager sur d’autres sites
Dec 15 00:00:01 DiskStation synopkg: pkgcurltool.cpp:261 Failed to curl perform, code=28, err=Error
Dec 15 00:02:02 DiskStation synopkg: pkgcurltool.cpp:261 Failed to curl perform, code=28, err=Error
Dec 15 00:04:03 DiskStation synopkg: pkgcurltool.cpp:261 Failed to curl perform, code=28, err=Error
Dec 15 00:04:04 DiskStation synopkg: pkgcurltool.cpp:428 Failed to download https://payment.synology.com/api/getPackageList.php, code=28, err=Error
Dec 15 00:06:48 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[1]
Dec 15 00:10:18 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[2]
Dec 15 00:24:50 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[1]
Dec 15 00:39:20 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 15 00:41:51 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100]
Dec 15 00:41:51 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed
Dec 15 00:41:51 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology]
Dec 15 00:44:54 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll.
Dec 15 00:45:24 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100]
Dec 15 00:45:24 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed
Dec 15 00:45:24 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology]
Dec 15 00:51:59 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll.
Dec 15 00:52:29 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100]
Dec 15 00:52:29 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed
Dec 15 00:52:29 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology]
Dec 15 01:00:53 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll.
Dec 15 01:01:23 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100]
Dec 15 01:01:23 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed
Dec 15 01:01:23 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology]
Dec 15 01:13:52 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[1]
Dec 15 01:16:53 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll.
Dec 15 01:17:23 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100]
Dec 15 01:17:23 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed
Dec 15 01:17:23 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology]
Dec 15 01:31:23 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[1]
Dec 15 01:34:37 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll.
Dec 15 01:35:08 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100]
Dec 15 01:35:08 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed
Dec 15 01:35:08 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology]
Dec 15 01:51:52 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll.
Dec 15 01:52:22 DiskStation ddnsd: ddns_syno_hostname_api.c:134 failed to send https request to [ddns.synology.com], err=[0x8100]
Dec 15 01:52:22 DiskStation ddnsd: UpdateSynology(ddnsd.c:1776): Syno Update failed
Dec 15 01:52:22 DiskStation ddnsd: ddnsd.c:1973 Fail to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology]
Dec 15 01:58:21 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[1]
Dec 15 02:13:52 DiskStation ddnsd: ddnsd.c:2876 DDNS need retry. UpdateAll.
Dec 15 02:13:54 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology]
Dec 16 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 16 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [109.219.219.241] at [Synology]
Dec 16 03:32:05 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 16 03:32:32 DiskStation ddnsd: ddnsd.c:2862 DDNS got IP changed. UpdateAll.
Dec 16 03:32:35 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology]
Dec 16 17:05:33 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 16 21:06:50 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 17 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 17 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology]
Dec 18 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 18 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology]
Dec 18 17:07:06 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 19 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 19 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology]
Dec 19 19:43:34 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 20 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 20 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology]
Dec 20 03:25:28 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 20 17:08:56 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 20 21:10:12 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 21 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 21 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology]
Dec 21 17:06:03 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 22 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 22 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology]
Dec 22 14:51:08 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 22 17:02:39 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 23 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 23 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [81.49.214.128] at [Synology]
Dec 23 03:34:52 DiskStation ddnsd: ddnsd.c:2862 DDNS got IP changed. UpdateAll.
Dec 23 03:34:53 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [90.7.77.64] at [Synology]
Dec 23 21:10:42 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 24 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 24 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [90.7.77.64] at [Synology]
Dec 24 17:36:03 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 25 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 25 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [90.7.77.64] at [Synology]
Dec 25 04:19:11 DiskStation entry.cgi_SYNO.Core.PortForwarding.RouterConf[1].get[30420]: src/libsynoportmap.cpp:514 file=/etc/portforward/router.conf not exists
Dec 25 04:22:04 DiskStation entry.cgi_SYNO.Core.PortForwarding.RouterConf[1].get[32127]: src/libsynoportmap.cpp:514 file=/etc/portforward/router.conf not exists
Dec 25 04:40:06 DiskStation entry.cgi_SYNO.Core.EzInternet[1].get[3965]: SYNO.Core.EzInternet.cpp:39 Failed to get key[step] in file[/tmp/ezinternet.step].
Dec 25 04:40:21 DiskStation entry.cgi_SYNO.Core.EzInternet[1].get[4073]: SYNO.Core.EzInternet.cpp:39 Failed to get key[step] in file[/tmp/ezinternet.step].
Dec 25 04:43:30 DiskStation entry.cgi_SYNO.Core.EzInternet[1].get[4888]: SYNO.Core.EzInternet.cpp:39 Failed to get key[step] in file[/tmp/ezinternet.step].
killall: synolunbkp: no process killed
Dec 25 04:43:36 DiskStation [1655738.933709] init: dhcp-client (eth0) main process (9513) killed by TERM signal
Dec 25 04:43:36 DiskStation dhcp-client: stopped on eth0
Dec 25 04:43:36 DiskStation entry.cgi_SYNO.Core.Network.Ethernet[1].set[4988]: net_route_table_edit.c:72 eth3 ip route del failed, instead of route
Dec 25 04:43:37 DiskStation [1655739.712415] init: smbd main process (13846) killed by TERM signal
Dec 25 04:43:42 DiskStation synorelayd: src/libsynoportmap.cpp:514 file=/etc/portforward/router.conf not exists
Dec 25 04:43:42 DiskStation synorelayd: src/libsynoportmapHelper.cpp:151 SLibSynoPortMapRouterDetect() success: manual/non-support change port router
Dec 25 04:43:42 DiskStation entry.cgi_SYNO.Core.Network[1].set[4988]: common_setting.cpp:292 check dns_primary: 81.253.149.14 -> 81.253.149.14
Dec 25 04:43:47 DiskStation entry.cgi_SYNO.Core.PortForwarding[1].detect[5801]: lib/libsynonetcheck.cpp:359 Public IP level is 2
Dec 25 04:43:47 DiskStation entry.cgi_SYNO.Core.PortForwarding[1].detect[5801]: src/libsynoportmap.cpp:357 nPublicIPLevel=2 > 1, can not do portforwarding
Dec 25 04:43:49 DiskStation entry.cgi_SYNO.Core.PortForwarding[1].detect[5801]: src/libsynoportmap.cpp:379 All network env checks are pass
Dec 25 04:43:51 DiskStation entry.cgi_SYNO.Core.PortForwarding[1].detect[5801]: src/NatpmpDetector.cpp:92 remove SZF_AIRPORT_LIST=/tmp/airport.tcp.local failed
Dec 25 04:43:51 DiskStation entry.cgi_SYNO.Core.PortForwarding[1].detect[5896]: src/UpnpDetector.cpp:117 Detected brand=ASUSTeK Computer Inc. model=RT-AC68U version=3.0.0.4.378
Dec 25 04:49:17 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [90.7.77.64] at [Synology]
Dec 25 08:39:52 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 25 18:03:39 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 25 23:21:21 DiskStation cups-lpd[21388]: Unable to connect to server: Connection refused
Dec 26 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 26 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [90.7.77.64] at [Synology]
Dec 26 14:19:31 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 26 14:26:57 DiskStation entry.cgi_SYNO.Core.Share[1].delete[20713]: share.cpp:2258 [3D] Success to delete.
Dec 26 14:27:12 DiskStation entry.cgi_SYNO.Core.Share[1].delete[21144]: share.cpp:2258 [film] Success to delete.
Dec 26 14:27:21 DiskStation entry.cgi_SYNO.Core.Share[1].delete[21558]: share.cpp:2258 [games] Success to delete.
Dec 26 14:27:50 DiskStation entry.cgi_SYNO.Core.Share[1].delete[22028]: share.cpp:2258 [saga] Success to delete.
Dec 26 14:27:58 DiskStation entry.cgi_SYNO.Core.Share[1].delete[22430]: share.cpp:2258 [Serie TV] Success to delete.
Dec 26 14:28:18 DiskStation php: Failed to get VERSION
Dec 26 14:28:18 DiskStation php: In AddOtherKeyServer: OnlineUpdateSynoKey failed
Dec 26 16:41:43 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 26 17:02:20 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 26 17:21:08 DiskStation kernel: [1787536.866591] sd 9:0:0:0: [sdq] No Caching mode page found
Dec 26 17:21:08 DiskStation kernel: [1787536.872177] sd 9:0:0:0: [sdq] Assuming drive cache: write through
Dec 26 17:21:08 DiskStation kernel: [1787536.881616] sd 9:0:0:0: [sdq] No Caching mode page found
Dec 26 17:21:08 DiskStation kernel: [1787536.887153] sd 9:0:0:0: [sdq] Assuming drive cache: write through
Dec 26 17:21:08 DiskStation kernel: [1787536.942219] sd 9:0:0:0: [sdq] No Caching mode page found
Dec 26 17:21:08 DiskStation kernel: [1787536.947745] sd 9:0:0:0: [sdq] Assuming drive cache: write through
Dec 26 17:21:09 DiskStation hotplugd: hotplugd.c:1031 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/003, usbid=13fd:1240:57442D575831314435355058 [0x2200 file_get_section_value.c:53]
Dec 26 17:21:09 DiskStation hotplugd: hotplugd.c:1274 ##### ACTION:add
Dec 26 17:21:09 DiskStation hotplugd: DEVNAME:sdq
Dec 26 17:21:09 DiskStation hotplugd: DEVICE:/proc/bus/usb/006/003
Dec 26 17:21:09 DiskStation hotplugd: DEVGUID:57442D5758313144353550580
Dec 26 17:21:09 DiskStation hotplugd: DEVPATH:sdq
Dec 26 17:21:09 DiskStation hotplugd: SUBSYSTEM:block
Dec 26 17:21:09 DiskStation hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1d.7/usb6/6-2/6-2:1.0/host9/target9:0:0/9:0:0:0
Dec 26 17:21:10 DiskStation hotplugd: hotplugd.c:1440 ==== USB disk [sdq] plugged in ====
Dec 26 17:21:10 DiskStation hotplugd: hotplugd.c:1441 goto USB disk, szDeviceName=sdq
Dec 26 17:21:10 DiskStation hotplugd: volume_parts_info_get_by_dev.c:95 Dev:sdq cannot find PostfixNumber.
Dec 26 17:21:10 DiskStation kernel: [1787538.471489] CIFS VFS: Malformed UNC in devname.
Dec 26 17:21:10 DiskStation kernel: [1787538.897135] UDF-fs: warning (device sdq1): udf_fill_super: No partition found (1)
Dec 26 17:21:10 DiskStation hotplugd: volume_external_mount.c:276 mount USB disk sdq1 partition 1 failed. [0x2C00 volume_external_part_mount.c:288]
Dec 26 17:21:16 DiskStation synocheckshare: synocheckshare_vol_mount.c:47 Export Share [USB] [/dev/sdq2] [/volumeUSB1/usbshare1-2]
Dec 26 17:21:44 DiskStation synocheckshare: synocheckshare_vol_unmount.c:147 Unmount Share [USB] [/dev/sdq2] [/volumeUSB1/usbshare1-2]
Dec 26 17:22:07 DiskStation kernel: [1787596.001046] EXT3-fs (sdq1): Ignoring deprecated oldalloc option
Dec 26 17:22:07 DiskStation kernel: [1787596.007192] EXT3-fs (sdq1): error: couldn't mount because of unsupported optional features (2c0)
Dec 26 17:22:09 DiskStation synocheckshare: synocheckshare_vol_mount.c:47 Export Share [USB] [/dev/sdq1] [/volumeUSB1/usbshare]
Dec 26 17:23:03 DiskStation kernel: [1787651.159052] Result: hostbyte=0x01 driverbyte=0x00
Dec 26 17:23:03 DiskStation kernel: [1787651.167668] cdb[0]=0x2a: 2a 00 04 40 d5 c0 00 00 f0 00
Dec 26 17:23:03 DiskStation kernel: [1787651.173234] end_request: I/O error, dev sdq, sector 71357888
Dec 26 17:23:03 DiskStation kernel: [1787651.187525] Result: hostbyte=0x01 driverbyte=0x00
Dec 26 17:23:03 DiskStation kernel: [1787651.196086] cdb[0]=0x2a: 2a 00 04 40 d6 b0 00 00 f0 00
Dec 26 17:23:03 DiskStation kernel: [1787651.201656] end_request: I/O error, dev sdq, sector 71358128
Dec 26 17:23:03 DiskStation kernel: [1787651.207651] Aborting journal on device sdq1-8.
Dec 26 17:23:03 DiskStation kernel: [1787651.212294] JBD2: Error -5 detected when updating journal superblock for sdq1-8.
Dec 26 17:23:03 DiskStation kernel: [1787651.219929] journal commit I/O error
Dec 26 17:23:04 DiskStation hotplugd: usb_get_device_id.c:49 Get usb info failed, DEVICE=/proc/bus/usb/006/003
Dec 26 17:23:04 DiskStation hotplugd: hotplugd.c:1023 failed get usb device id from usb config, DEVICE=/proc/bus/usb/006/003
Dec 26 17:23:04 DiskStation hotplugd: hotplugd.c:1274 ##### ACTION:remove
Dec 26 17:23:04 DiskStation hotplugd: DEVNAME:sdq
Dec 26 17:23:04 DiskStation hotplugd: DEVICE:/proc/bus/usb/006/003
Dec 26 17:23:04 DiskStation hotplugd: DEVGUID:57442D5758313144353550580
Dec 26 17:23:04 DiskStation hotplugd: DEVPATH:sdq
Dec 26 17:23:04 DiskStation hotplugd: SUBSYSTEM:block
Dec 26 17:23:04 DiskStation hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:1d.7/usb6/6-2/6-2:1.0/host9/target9:0:0/9:0:0:0
Dec 26 17:23:04 DiskStation hotplugd: hotplugd.c:1449 ==== USB disk [sdq] plugged out====
Dec 26 17:23:04 DiskStation hotplugd: SYNOReadOneSectorFromDev(57): failed to open device [/dev/sdq] (errno = 2)
Dec 26 17:23:04 DiskStation hotplugd: disk_size_get.c:42 Failed to open /dev/sdq, errno=No such file or directory
Dec 26 17:23:04 DiskStation hotplugd: volume_parts_info_get_by_dev.c:301 failed to get disk '/dev/sdq' size
Dec 26 17:23:04 DiskStation synocheckshare: synocheckshare_vol_unmount.c:147 Unmount Share [USB] [/dev/sdq1] [/volumeUSB1/usbshare]
Dec 26 17:23:04 DiskStation kernel: [1787653.102087] EXT4-fs error (device sdq1): ext4_find_entry:1469: inode #2: comm BackupShareDele: reading directory lblock 0
Dec 26 17:23:04 DiskStation kernel: [1787653.113507] EXT4-fs error (device sdq1): ext4_read_inode_bitmap:175: comm BackupShareDele: Cannot read inode bitmap - block_group = 0, inode_bitmap = 1228
Dec 26 17:23:04 DiskStation BackupShareDelete: share_tmp_path_get.c:42 Failed to mkdir, path=/volumeUSB1/usbshare/@tmp
Dec 26 17:23:04 DiskStation BackupShareDelete: (32766) [err] share_backup_data.cpp:35 SYNOShareTmpPathGet: [0x0B00 share_tmp_path_get.c:43]
Dec 26 17:23:04 DiskStation BackupShareDelete: (32766) [err] share_delete.cpp:44 remove cache on [usbshare1]
Dec 26 17:23:05 DiskStation kernel: [1787653.621365] EXT4-fs error (device sdq1): ext4_put_super:840: Couldn't clean up the journal
Dec 26 17:23:05 DiskStation kernel: [1787653.629889] EXT4-fs (sdq1): Remounting filesystem read-only
Dec 26 18:00:26 DiskStation entry.cgi_SYNO.Core.Upgrade.Server[1].check[10210]: rssfile.cpp:90 failed to exec cmd=[wget --user-agent=synology_cedarview_1513+ DSM5.2-5644 Update 2 (dsmupdate) -O /var/run/autoupdate_tmp_file_RSS https://update.synology.com/autoupdate/genRSS.php?tz=Amsterdam&unique=synology_cedarview_1513%2B&major=5&minor=2&build_num=5644], ret=4, No such file or directory
Dec 26 18:00:26 DiskStation entry.cgi_SYNO.Core.Upgrade.Server[1].check[10210]: dsmupdate.cpp:231 Fail to get RSS file
Dec 26 18:00:26 DiskStation entry.cgi_SYNO.Core.Upgrade.Server[1].check[10210]: dsmupdate.cpp:392 Fail to get latest DSM info
Dec 26 18:03:44 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 26 18:03:52 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[10210]: pkgcurltool.cpp:261 Failed to curl perform, code=28, err=Error
Dec 26 18:03:55 DiskStation entry.cgi_SYNO.Core.Upgrade.Server[1].check[10859]: rssfile.cpp:90 failed to exec cmd=[wget --user-agent=synology_cedarview_1513+ DSM5.2-5644 Update 2 (dsmupdate) -O /var/run/autoupdate_tmp_file_RSS https://update.synology.com/autoupdate/genRSS.php?tz=Amsterdam&unique=synology_cedarview_1513%2B&major=5&minor=2&build_num=5644], ret=4, No such file or directory
Dec 26 18:03:55 DiskStation entry.cgi_SYNO.Core.Upgrade.Server[1].check[10859]: dsmupdate.cpp:231 Fail to get RSS file
Dec 26 18:03:55 DiskStation entry.cgi_SYNO.Core.Upgrade.Server[1].check[10859]: dsmupdate.cpp:392 Fail to get latest DSM info
Dec 26 18:04:23 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[10210]: pkgcurltool.cpp:261 Failed to curl perform, code=35, err=Error
Dec 26 18:04:23 DiskStation entry.cgi_SYNO.Core.Package.Server[1].check[10210]: pkgcurltool.cpp:423 Failed to download https://payment.synology.com/api/getPackageList.php, code=35, err=Error
Dec 26 19:41:58 DiskStation entry.cgi_SYNO.Core.Share[1].delete[12644]: share.cpp:2258 [wii] Success to delete.
Dec 26 19:42:12 DiskStation entry.cgi_SYNO.Core.Share[1].delete[13217]: share.cpp:2258 [autre] Success to delete.
Dec 26 20:04:54 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 26 20:28:06 DiskStation entry.cgi_SYNO.Core.PortForwarding.RouterConf[1].get[27327]: src/libsynoportmap.cpp:514 file=/etc/portforward/router.conf not exists
Dec 26 20:53:26 DiskStation PkgSynoMan.cgi: pkgcurltool.cpp:444 http://packages.synocommunity.com, Failed to request packages, httpResponseCode=502
Dec 26 20:53:26 DiskStation PkgSynoMan.cgi: pkgcurltool.cpp:444 http://packages.synocommunity.com, Failed to request packages, httpResponseCode=502
Dec 26 20:54:38 DiskStation PkgSynoMan.cgi: pkgserver.cpp:253 Failed to read data.
Dec 26 20:54:38 DiskStation PkgSynoMan.cgi: pkgserver.cpp:253 Failed to read data.
Dec 26 20:54:38 DiskStation PkgSynoMan.cgi: pkgserver.cpp:615 Failed to curl perform, code=42, err=Error, url=https://global.download.synology.com/download/spk/SurveillanceStation/7.1-4080/SurveillanceStation-cedarview-7.1-4080.spk
Dec 26 22:29:18 DiskStation synomediaparserd: mediapar_media.c (50) Failed to get misc info from file [/volume1/video/Bluray/Le Seigneur des anneaux  INTEGRAL  BLU RAY/LA COMMUNAUTE DE L'ANNEAU-FULL BLU-RAY/BDMV/STREAM/00003.m2ts].
Dec 26 22:29:22 DiskStation synomediaparserd: mediapar_media.c (50) Failed to get misc info from file [/volume1/video/Bluray/Le Seigneur des anneaux  INTEGRAL  BLU RAY/LA COMMUNAUTE DE L'ANNEAU-FULL BLU-RAY/BDMV/STREAM/00017.m2ts].
Dec 26 22:29:31 DiskStation synomediaparserd: mediapar_media.c (50) Failed to get misc info from file [/volume1/video/Bluray/Le Seigneur des anneaux  INTEGRAL  BLU RAY/LE RETOUR DU ROI-FULL BLU RAY/BDMV/STREAM/00003.m2ts].
Dec 26 22:29:36 DiskStation synomediaparserd: mediapar_media.c (50) Failed to get misc info from file [/volume1/video/Bluray/SNOWPIERCER/BDMV/STREAM/00066.m2ts].
Dec 26 22:29:40 DiskStation synomediaparserd: mediapar_media.c (50) Failed to get misc info from file [/volume1/video/Bluray/SNOWPIERCER/BDMV/STREAM/00067.m2ts].
Dec 26 22:29:52 DiskStation synomediaparserd: mediapar_media.c (50) Failed to get misc info from file [/volume1/video/Bluray/La Belle et La Bête 2014 1080p BluRay VC-1 DTS-HD MA 5.1-WiHD/LABELLEETLABETE/BDMV/STREAM/00006.m2ts].
Dec 26 22:52:06 DiskStation entry.cgi_SYNO.Core.Share[1].delete[9807]: share.cpp:2258 [logiciel] Success to delete.
Dec 27 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 27 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [cocolabombe0.synology.me] with IP [90.7.77.64] at [Synology]
Dec 27 13:09:58 DiskStation ddnsd: ddnsd.c:2891 DDNS get Ext-IP failed. Count[1]
Dec 27 16:41:36 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 27 21:14:37 DiskStation kernel: [1887904.264827] md: md2: current auto_remap = 0
Dec 27 21:14:37 DiskStation kernel: [1887904.269286] md: reshape of RAID array md2
Dec 27 22:14:44 DiskStation heartbeatd: ddns_syno_heartbeat_api.c:100 [Err] failed to send request[0][(null)]
Dec 27 22:58:43 DiskStation kernel: [1894148.282671] INFO: task jbd2/dm-0-8:11795 blocked for more than 120 seconds.
Dec 27 22:58:43 DiskStation kernel: [1894148.289837] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 27 22:58:43 DiskStation kernel: [1894148.305180]  ffff88007981fcd8 0000000000000046 0000000000000001 ffff88007acd0770
Dec 27 22:58:43 DiskStation kernel: [1894148.312866]  0000000000000286 ffff88007ec26a30 ffff88007981ffd8 ffff88007981ffd8
Dec 27 22:58:43 DiskStation kernel: [1894148.320659]  ffff88007981ffd8 ffff88007ec26a30 0000000000000246 ffff88007981fe08
Dec 27 22:58:43 DiskStation kernel: [1894148.328340] Call Trace:
Dec 27 22:58:43 DiskStation kernel: [1894148.330986]  [<ffffffff811d08c9>] ? jbd2_journal_commit_transaction+0x1e9/0x16c0
Dec 27 22:58:43 DiskStation kernel: [1894148.338593]  [<ffffffff810634de>] ? update_curr+0x8e/0xe0
Dec 27 22:58:43 DiskStation kernel: [1894148.344191]  [<ffffffff81065749>] ? dequeue_task_fair+0x1d9/0x6b0
Dec 27 22:58:43 DiskStation kernel: [1894148.350477]  [<ffffffff8105cabb>] ? update_rq_clock+0x2b/0x50
Dec 27 22:58:43 DiskStation kernel: [1894148.356405]  [<ffffffff8148a87b>] ? __schedule+0x27b/0x6a0
Dec 27 22:58:43 DiskStation kernel: [1894148.362092]  [<ffffffff810412d4>] ? lock_timer_base.isra.28+0x34/0x70
Dec 27 22:58:43 DiskStation kernel: [1894148.368725]  [<ffffffff81054560>] ? finish_wait+0xa0/0xa0
Dec 27 22:58:43 DiskStation kernel: [1894148.374341]  [<ffffffff811d4e94>] ? kjournald2+0xb4/0x240
Dec 27 22:58:43 DiskStation kernel: [1894148.379953]  [<ffffffff81054560>] ? finish_wait+0xa0/0xa0
Dec 27 22:58:43 DiskStation kernel: [1894148.385547]  [<ffffffff811d4de0>] ? jbd2_journal_release_jbd_inode+0x120/0x120
Dec 27 22:58:43 DiskStation kernel: [1894148.392961]  [<ffffffff81053f85>] ? kthread+0xb5/0xc0
Dec 27 22:58:43 DiskStation kernel: [1894148.398220]  [<ffffffff81053ed0>] ? kthread_create_on_node+0x120/0x120
Dec 27 22:58:43 DiskStation kernel: [1894148.404951]  [<ffffffff8148c42c>] ? ret_from_fork+0x7c/0xb0
Dec 27 22:58:43 DiskStation kernel: [1894148.410736]  [<ffffffff81053ed0>] ? kthread_create_on_node+0x120/0x120
Dec 27 22:58:43 DiskStation kernel: [1894148.417476] INFO: task mysqld:13876 blocked for more than 120 seconds.
Dec 27 22:58:43 DiskStation kernel: [1894148.424201] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 27 22:58:43 DiskStation kernel: [1894148.439538]  ffff8800686c3ba8 0000000000000086 ffff8800686c3b58 ffff88007acd0770
Dec 27 22:58:43 DiskStation kernel: [1894148.447247]  0000000000000001 ffff880075fa21c0 ffff8800686c3fd8 ffff8800686c3fd8
Dec 27 22:58:43 DiskStation kernel: [1894148.454940]  ffff8800686c3fd8 ffff880075fa21c0 0000000000000246 ffff88007a82f800
Dec 27 22:58:43 DiskStation kernel: [1894148.462641] Call Trace:
Dec 27 22:58:43 DiskStation kernel: [1894148.465297]  [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0
Dec 27 22:58:43 DiskStation kernel: [1894148.471580]  [<ffffffff81054560>] ? finish_wait+0xa0/0xa0
Dec 27 22:58:43 DiskStation kernel: [1894148.477187]  [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150
Dec 27 22:58:43 DiskStation kernel: [1894148.483566]  [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80
Dec 27 22:58:43 DiskStation kernel: [1894148.489611]  [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240
Dec 27 22:58:43 DiskStation kernel: [1894148.495897]  [<ffffffff8110d179>] ? update_time+0x79/0xc0
Dec 27 22:58:43 DiskStation kernel: [1894148.501496]  [<ffffffff81111d60>] ? __mnt_want_write+0x40/0x60
Dec 27 22:58:43 DiskStation kernel: [1894148.507527]  [<ffffffff8110d3ac>] ? touch_atime+0xfc/0x140
Dec 27 22:58:43 DiskStation kernel: [1894148.513249]  [<ffffffff810b34e4>] ? generic_file_aio_read+0x5c4/0x710
Dec 27 22:58:43 DiskStation kernel: [1894148.519892]  [<ffffffff810eee2b>] ? do_sync_read+0x6b/0xa0
Dec 27 22:58:44 DiskStation kernel: [1894148.525589]  [<ffffffff810f00b9>] ? vfs_read+0xa9/0x190
Dec 27 22:58:44 DiskStation kernel: [1894148.531030]  [<ffffffff810f068d>] ? SyS_pread64+0x9d/0xb0
Dec 27 22:58:44 DiskStation kernel: [1894148.536656]  [<ffffffff8108b73d>] ? compat_sys_clock_gettime+0x7d/0x90
Dec 27 22:58:44 DiskStation kernel: [1894148.543391]  [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e
Dec 27 22:58:44 DiskStation kernel: [1894148.549487] INFO: task mysqld:13877 blocked for more than 120 seconds.
Dec 27 22:58:44 DiskStation kernel: [1894148.556280] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 27 22:58:44 DiskStation kernel: [1894148.571598]  ffff88004548fba8 0000000000000086 ffff88004548fb58 ffff88007acd0770
Dec 27 22:58:44 DiskStation kernel: [1894148.579305]  0000000000000001 ffff88006b3704c0 ffff88004548ffd8 ffff88004548ffd8
Dec 27 22:58:44 DiskStation kernel: [1894148.587015]  ffff88004548ffd8 ffff88006b3704c0 0000000000000246 ffff88007a82f800
Dec 27 22:58:44 DiskStation kernel: [1894148.594726] Call Trace:
Dec 27 22:58:44 DiskStation kernel: [1894148.597381]  [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0
Dec 27 22:58:44 DiskStation kernel: [1894148.603674]  [<ffffffff81054560>] ? finish_wait+0xa0/0xa0
Dec 27 22:58:44 DiskStation kernel: [1894148.609271]  [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150
Dec 27 22:58:44 DiskStation kernel: [1894148.615651]  [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80
Dec 27 22:58:44 DiskStation kernel: [1894148.621667]  [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240
Dec 27 22:58:44 DiskStation kernel: [1894148.627976]  [<ffffffff8110d179>] ? update_time+0x79/0xc0
Dec 27 22:58:44 DiskStation kernel: [1894148.633577]  [<ffffffff81111d60>] ? __mnt_want_write+0x40/0x60
Dec 27 22:58:44 DiskStation kernel: [1894148.639614]  [<ffffffff8110d3ac>] ? touch_atime+0xfc/0x140
Dec 27 22:58:44 DiskStation kernel: [1894148.645306]  [<ffffffff810b34e4>] ? generic_file_aio_read+0x5c4/0x710
Dec 27 22:58:44 DiskStation kernel: [1894148.651945]  [<ffffffff810eee2b>] ? do_sync_read+0x6b/0xa0
Dec 27 22:58:44 DiskStation kernel: [1894148.657626]  [<ffffffff810f00b9>] ? vfs_read+0xa9/0x190
Dec 27 22:58:44 DiskStation kernel: [1894148.663052]  [<ffffffff810f068d>] ? SyS_pread64+0x9d/0xb0
Dec 27 22:58:44 DiskStation kernel: [1894148.668660]  [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e
Dec 27 22:58:44 DiskStation kernel: [1894148.674709] INFO: task Plex Media Serv:25260 blocked for more than 120 seconds.
Dec 27 22:58:44 DiskStation kernel: [1894148.682209] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 27 22:58:44 DiskStation kernel: [1894148.697514]  ffff88006136fae8 0000000000200086 0000000000000001 ffff88007acd00c0
Dec 27 22:58:44 DiskStation kernel: [1894148.705204]  ffff88006136fac8 ffff88005ef2f750 ffff88006136ffd8 ffff88006136ffd8
Dec 27 22:58:44 DiskStation kernel: [1894148.712915]  ffff88006136ffd8 ffff88005ef2f750 0000000000200246 ffff88007a82f800
Dec 27 22:58:44 DiskStation kernel: [1894148.720629] Call Trace:
Dec 27 22:58:44 DiskStation kernel: [1894148.723295]  [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0
Dec 27 22:58:44 DiskStation kernel: [1894148.729582]  [<ffffffff81054560>] ? finish_wait+0xa0/0xa0
Dec 27 22:58:44 DiskStation kernel: [1894148.735175]  [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150
Dec 27 22:58:44 DiskStation kernel: [1894148.741547]  [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80
Dec 27 22:58:44 DiskStation kernel: [1894148.747575]  [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240
Dec 27 22:58:44 DiskStation kernel: [1894148.753890]  [<ffffffff8110d179>] ? update_time+0x79/0xc0
Dec 27 22:58:44 DiskStation kernel: [1894148.759521]  [<ffffffff81110d19>] ? mnt_clone_write+0x9/0x30
Dec 27 22:58:44 DiskStation kernel: [1894148.765396]  [<ffffffff8110d257>] ? file_update_time+0x97/0xf0
Dec 27 22:58:44 DiskStation kernel: [1894148.771464]  [<ffffffff810b2bda>] ? __generic_file_aio_write+0x18a/0x3f0
Dec 27 22:58:44 DiskStation kernel: [1894148.778356]  [<ffffffff810b2eaa>] ? generic_file_aio_write+0x6a/0xe0
Dec 27 22:58:44 DiskStation kernel: [1894148.784921]  [<ffffffff8118a9c8>] ? ext4_file_write+0xc8/0x420
Dec 27 22:58:44 DiskStation kernel: [1894148.790978]  [<ffffffff810fec4c>] ? filename_lookup.isra.35+0x2c/0x80
Dec 27 22:58:44 DiskStation kernel: [1894148.797620]  [<ffffffff811033ad>] ? user_path_at_empty+0x6d/0xc0
Dec 27 22:58:44 DiskStation kernel: [1894148.803826]  [<ffffffff810eed8b>] ? do_sync_write+0x6b/0xa0
Dec 27 22:58:44 DiskStation kernel: [1894148.809592]  [<ffffffff810efd7b>] ? vfs_write+0xcb/0x360
Dec 27 22:58:44 DiskStation kernel: [1894148.815113]  [<ffffffff8102e3d1>] ? sys32_stat64+0x21/0x30
Dec 27 22:58:44 DiskStation kernel: [1894148.820813]  [<ffffffff810f059d>] ? SyS_write+0x6d/0xc0
Dec 27 22:58:44 DiskStation kernel: [1894148.826235]  [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e
Dec 27 22:58:44 DiskStation kernel: [1894148.832288] INFO: task python:13361 blocked for more than 120 seconds.
Dec 27 22:58:44 DiskStation kernel: [1894148.839005] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 27 22:58:44 DiskStation kernel: [1894148.854349]  ffff88005f2339e8 0000000000200086 0000000017f00901 ffff88007acd00c0
Dec 27 22:58:44 DiskStation kernel: [1894148.862048]  ffff8800502ae470 ffff88007ae6afe0 ffff88005f233fd8 ffff88005f233fd8
Dec 27 22:58:44 DiskStation kernel: [1894148.869758]  ffff88005f233fd8 ffff88007ae6afe0 0000000000000000 ffff88007ae6afe0
Dec 27 22:58:44 DiskStation kernel: [1894148.877497] Call Trace:
Dec 27 22:58:44 DiskStation kernel: [1894148.880151]  [<ffffffff81120980>] ? do_thaw_one+0x60/0x60
Dec 27 22:58:44 DiskStation kernel: [1894148.885750]  [<ffffffff8148ae1b>] ? io_schedule+0x8b/0xd0
Dec 27 22:58:44 DiskStation kernel: [1894148.891378]  [<ffffffff8112098a>] ? sleep_on_buffer+0xa/0x20
Dec 27 22:58:44 DiskStation kernel: [1894148.897221]  [<ffffffff81488711>] ? __wait_on_bit_lock+0x51/0xb0
Dec 27 22:58:44 DiskStation kernel: [1894148.903446]  [<ffffffff810b1b1a>] ? find_get_page+0x1a/0xa0
Dec 27 22:58:44 DiskStation kernel: [1894148.909201]  [<ffffffff81120980>] ? do_thaw_one+0x60/0x60
Dec 27 22:58:44 DiskStation kernel: [1894148.914813]  [<ffffffff814887ef>] ? out_of_line_wait_on_bit_lock+0x7f/0xa0
Dec 27 22:58:44 DiskStation kernel: [1894148.921981]  [<ffffffff81054590>] ? autoremove_wake_function+0x30/0x30
Dec 27 22:58:44 DiskStation kernel: [1894148.928727]  [<ffffffff811cfa3e>] ? do_get_write_access+0x7e/0x490
Dec 27 22:58:44 DiskStation kernel: [1894148.935121]  [<ffffffff811221bd>] ? __getblk+0x1d/0x2e0
Dec 27 22:58:44 DiskStation kernel: [1894148.940553]  [<ffffffff811cffaa>] ? jbd2_journal_get_write_access+0x2a/0x50
Dec 27 22:58:44 DiskStation kernel: [1894148.947713]  [<ffffffff811b0669>] ? __ext4_journal_get_write_access+0x39/0x90
Dec 27 22:58:44 DiskStation kernel: [1894148.955055]  [<ffffffff811b88f0>] ? ext4_free_blocks+0x330/0xa60
Dec 27 22:58:44 DiskStation kernel: [1894148.961258]  [<ffffffff81121799>] ? __find_get_block+0x99/0x1d0
Dec 27 22:58:44 DiskStation kernel: [1894148.967406]  [<ffffffff811ae1b7>] ? ext4_ext_remove_space+0xb17/0xd90
Dec 27 22:58:44 DiskStation kernel: [1894148.974054]  [<ffffffff811af8b1>] ? ext4_ext_truncate+0xa1/0xd0
Dec 27 22:58:44 DiskStation kernel: [1894148.980211]  [<ffffffff81192b9d>] ? ext4_truncate+0x2ad/0x2f0
Dec 27 22:58:44 DiskStation kernel: [1894148.986161]  [<ffffffff81195758>] ? ext4_evict_inode+0x3e8/0x420
Dec 27 22:58:44 DiskStation kernel: [1894148.992411]  [<ffffffff8110cf32>] ? evict+0xa2/0x190
Dec 27 22:58:44 DiskStation kernel: [1894148.997640]  [<ffffffff810ff4dd>] ? do_unlinkat+0x19d/0x1f0
Dec 27 22:58:44 DiskStation kernel: [1894149.003515]  [<ffffffff8102e3d1>] ? sys32_stat64+0x21/0x30
Dec 27 22:58:44 DiskStation kernel: [1894149.009235]  [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e
Dec 27 23:00:44 DiskStation kernel: [1894268.965280] INFO: task jbd2/dm-0-8:11795 blocked for more than 120 seconds.
Dec 27 23:00:44 DiskStation kernel: [1894268.972445] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 27 23:00:44 DiskStation kernel: [1894268.987783]  ffff88007981fcd8 0000000000000046 0000000000000001 ffff88007acd0770
Dec 27 23:00:44 DiskStation kernel: [1894268.995456]  0000000000000286 ffff88007ec26a30 ffff88007981ffd8 ffff88007981ffd8
Dec 27 23:00:44 DiskStation kernel: [1894269.003157]  ffff88007981ffd8 ffff88007ec26a30 0000000000000246 ffff88007981fe08
Dec 27 23:00:44 DiskStation kernel: [1894269.010859] Call Trace:
Dec 27 23:00:44 DiskStation kernel: [1894269.013505]  [<ffffffff811d08c9>] ? jbd2_journal_commit_transaction+0x1e9/0x16c0
Dec 27 23:00:44 DiskStation kernel: [1894269.021107]  [<ffffffff810634de>] ? update_curr+0x8e/0xe0
Dec 27 23:00:44 DiskStation kernel: [1894269.026712]  [<ffffffff81065749>] ? dequeue_task_fair+0x1d9/0x6b0
Dec 27 23:00:44 DiskStation kernel: [1894269.033030]  [<ffffffff8105cabb>] ? update_rq_clock+0x2b/0x50
Dec 27 23:00:44 DiskStation kernel: [1894269.039020]  [<ffffffff8148a87b>] ? __schedule+0x27b/0x6a0
Dec 27 23:00:44 DiskStation kernel: [1894269.044707]  [<ffffffff810412d4>] ? lock_timer_base.isra.28+0x34/0x70
Dec 27 23:00:44 DiskStation kernel: [1894269.051334]  [<ffffffff81054560>] ? finish_wait+0xa0/0xa0
Dec 27 23:00:44 DiskStation kernel: [1894269.056939]  [<ffffffff811d4e94>] ? kjournald2+0xb4/0x240
Dec 27 23:00:44 DiskStation kernel: [1894269.062523]  [<ffffffff81054560>] ? finish_wait+0xa0/0xa0
Dec 27 23:00:44 DiskStation kernel: [1894269.068131]  [<ffffffff811d4de0>] ? jbd2_journal_release_jbd_inode+0x120/0x120
Dec 27 23:00:44 DiskStation kernel: [1894269.075540]  [<ffffffff81053f85>] ? kthread+0xb5/0xc0
Dec 27 23:00:44 DiskStation kernel: [1894269.080800]  [<ffffffff81053ed0>] ? kthread_create_on_node+0x120/0x120
Dec 27 23:00:44 DiskStation kernel: [1894269.087516]  [<ffffffff8148c42c>] ? ret_from_fork+0x7c/0xb0
Dec 27 23:00:44 DiskStation kernel: [1894269.093293]  [<ffffffff81053ed0>] ? kthread_create_on_node+0x120/0x120
Dec 27 23:00:44 DiskStation kernel: [1894269.100082] INFO: task mysqld:13876 blocked for more than 120 seconds.
Dec 27 23:00:44 DiskStation kernel: [1894269.106792] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 27 23:00:44 DiskStation kernel: [1894269.122184]  ffff8800686c3ba8 0000000000000086 ffff8800686c3b58 ffff88007acd0770
Dec 27 23:00:44 DiskStation kernel: [1894269.129906]  0000000000000001 ffff880075fa21c0 ffff8800686c3fd8 ffff8800686c3fd8
Dec 27 23:00:44 DiskStation kernel: [1894269.137617]  ffff8800686c3fd8 ffff880075fa21c0 0000000000000246 ffff88007a82f800
Dec 27 23:00:44 DiskStation kernel: [1894269.145311] Call Trace:
Dec 27 23:00:44 DiskStation kernel: [1894269.147989]  [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0
Dec 27 23:00:44 DiskStation kernel: [1894269.154299]  [<ffffffff81054560>] ? finish_wait+0xa0/0xa0
Dec 27 23:00:44 DiskStation kernel: [1894269.159914]  [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150
Dec 27 23:00:44 DiskStation kernel: [1894269.166297]  [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80
Dec 27 23:00:44 DiskStation kernel: [1894269.172344]  [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240
Dec 27 23:00:44 DiskStation kernel: [1894269.178649]  [<ffffffff8110d179>] ? update_time+0x79/0xc0
Dec 27 23:00:44 DiskStation kernel: [1894269.184244]  [<ffffffff81111d60>] ? __mnt_want_write+0x40/0x60
Dec 27 23:00:44 DiskStation kernel: [1894269.190283]  [<ffffffff8110d3ac>] ? touch_atime+0xfc/0x140
Dec 27 23:00:44 DiskStation kernel: [1894269.195958]  [<ffffffff810b34e4>] ? generic_file_aio_read+0x5c4/0x710
Dec 27 23:00:44 DiskStation kernel: [1894269.202596]  [<ffffffff810eee2b>] ? do_sync_read+0x6b/0xa0
Dec 27 23:00:44 DiskStation kernel: [1894269.208315]  [<ffffffff810f00b9>] ? vfs_read+0xa9/0x190
Dec 27 23:00:44 DiskStation kernel: [1894269.213741]  [<ffffffff810f068d>] ? SyS_pread64+0x9d/0xb0
Dec 27 23:00:44 DiskStation kernel: [1894269.219344]  [<ffffffff8108b73d>] ? compat_sys_clock_gettime+0x7d/0x90
Dec 27 23:00:44 DiskStation kernel: [1894269.226063]  [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e
Dec 27 23:00:44 DiskStation kernel: [1894269.232118] INFO: task mysqld:13877 blocked for more than 120 seconds.
Dec 27 23:00:44 DiskStation kernel: [1894269.238843] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 27 23:00:44 DiskStation kernel: [1894269.254170]  ffff88004548fba8 0000000000000086 ffff88004548fb58 ffff88007acd0770
Dec 27 23:00:44 DiskStation kernel: [1894269.261860]  0000000000000001 ffff88006b3704c0 ffff88004548ffd8 ffff88004548ffd8
Dec 27 23:00:44 DiskStation kernel: [1894269.269563]  ffff88004548ffd8 ffff88006b3704c0 0000000000000246 ffff88007a82f800
Dec 27 23:00:44 DiskStation kernel: [1894269.277308] Call Trace:
Dec 27 23:00:44 DiskStation kernel: [1894269.279973]  [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0
Dec 27 23:00:44 DiskStation kernel: [1894269.286264]  [<ffffffff81054560>] ? finish_wait+0xa0/0xa0
Dec 27 23:00:44 DiskStation kernel: [1894269.291886]  [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150
Dec 27 23:00:44 DiskStation kernel: [1894269.298272]  [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80
Dec 27 23:00:44 DiskStation kernel: [1894269.304332]  [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240
Dec 27 23:00:44 DiskStation kernel: [1894269.310640]  [<ffffffff8110d179>] ? update_time+0x79/0xc0
Dec 27 23:00:44 DiskStation kernel: [1894269.316236]  [<ffffffff81111d60>] ? __mnt_want_write+0x40/0x60
Dec 27 23:00:44 DiskStation kernel: [1894269.322266]  [<ffffffff8110d3ac>] ? touch_atime+0xfc/0x140
Dec 27 23:00:44 DiskStation kernel: [1894269.327951]  [<ffffffff810b34e4>] ? generic_file_aio_read+0x5c4/0x710
Dec 27 23:00:44 DiskStation kernel: [1894269.334594]  [<ffffffff810eee2b>] ? do_sync_read+0x6b/0xa0
Dec 27 23:00:44 DiskStation kernel: [1894269.340286]  [<ffffffff810f00b9>] ? vfs_read+0xa9/0x190
Dec 27 23:00:44 DiskStation kernel: [1894269.345722]  [<ffffffff810f068d>] ? SyS_pread64+0x9d/0xb0
Dec 27 23:00:44 DiskStation kernel: [1894269.351306]  [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e
Dec 27 23:00:44 DiskStation kernel: [1894269.357438] INFO: task mysqld:14935 blocked for more than 120 seconds.
Dec 27 23:00:44 DiskStation kernel: [1894269.364219] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 27 23:00:44 DiskStation kernel: [1894269.379561]  ffff880068527ae8 0000000000000086 0000000000000000 ffffffff81812440
Dec 27 23:00:44 DiskStation kernel: [1894269.387267]  0000000000000000 ffff88006b23e380 ffff880068527fd8 ffff880068527fd8
Dec 27 23:00:44 DiskStation kernel: [1894269.394941]  ffff880068527fd8 ffff88006b23e380 0000000000000246 ffff88007a82f800
Dec 27 23:00:44 DiskStation kernel: [1894269.402634] Call Trace:
Dec 27 23:00:44 DiskStation kernel: [1894269.405281]  [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0
Dec 27 23:00:44 DiskStation kernel: [1894269.411566]  [<ffffffff81054560>] ? finish_wait+0xa0/0xa0
Dec 27 23:00:44 DiskStation kernel: [1894269.417159]  [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150
Dec 27 23:00:44 DiskStation kernel: [1894269.423529]  [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80
Dec 27 23:00:44 DiskStation kernel: [1894269.429555]  [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240
Dec 27 23:00:44 DiskStation kernel: [1894269.435835]  [<ffffffff8110d179>] ? update_time+0x79/0xc0
Dec 27 23:00:44 DiskStation kernel: [1894269.441441]  [<ffffffff81110d19>] ? mnt_clone_write+0x9/0x30
Dec 27 23:00:44 DiskStation kernel: [1894269.447281]  [<ffffffff8110d257>] ? file_update_time+0x97/0xf0
Dec 27 23:00:44 DiskStation kernel: [1894269.453328]  [<ffffffff810b2bda>] ? __generic_file_aio_write+0x18a/0x3f0
Dec 27 23:00:44 DiskStation kernel: [1894269.460242]  [<ffffffff810b2eaa>] ? generic_file_aio_write+0x6a/0xe0
Dec 27 23:00:44 DiskStation kernel: [1894269.466809]  [<ffffffff8118a9c8>] ? ext4_file_write+0xc8/0x420
Dec 27 23:00:44 DiskStation kernel: [1894269.472840]  [<ffffffff810d9a62>] ? page_add_new_anon_rmap+0x32/0xf0
Dec 27 23:00:45 DiskStation kernel: [1894269.479405]  [<ffffffff810d064c>] ? handle_pte_fault+0x8ac/0x920
Dec 27 23:00:45 DiskStation kernel: [1894269.485616]  [<ffffffff810eed8b>] ? do_sync_write+0x6b/0xa0
Dec 27 23:00:45 DiskStation kernel: [1894269.491375]  [<ffffffff810efd7b>] ? vfs_write+0xcb/0x360
Dec 27 23:00:45 DiskStation kernel: [1894269.496887]  [<ffffffff81075d6a>] ? getnstimeofday+0xa/0x30
Dec 27 23:00:45 DiskStation kernel: [1894269.502665]  [<ffffffff810f073d>] ? SyS_pwrite64+0x9d/0xb0
Dec 27 23:00:45 DiskStation kernel: [1894269.508371]  [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e
Dec 27 23:00:45 DiskStation kernel: [1894269.514406] INFO: task Plex Media Serv:25260 blocked for more than 120 seconds.
Dec 27 23:00:45 DiskStation kernel: [1894269.521898] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 27 23:00:45 DiskStation kernel: [1894269.537198]  ffff88006136fae8 0000000000200086 0000000000000001 ffff88007acd00c0
Dec 27 23:00:45 DiskStation kernel: [1894269.544865]  ffff88006136fac8 ffff88005ef2f750 ffff88006136ffd8 ffff88006136ffd8
Dec 27 23:00:45 DiskStation kernel: [1894269.552548]  ffff88006136ffd8 ffff88005ef2f750 0000000000200246 ffff88007a82f800
Dec 27 23:00:45 DiskStation kernel: [1894269.560231] Call Trace:
Dec 27 23:00:45 DiskStation kernel: [1894269.562887]  [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0
Dec 27 23:00:45 DiskStation kernel: [1894269.569198]  [<ffffffff81054560>] ? finish_wait+0xa0/0xa0
Dec 27 23:00:45 DiskStation kernel: [1894269.574816]  [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150
Dec 27 23:00:45 DiskStation kernel: [1894269.581178]  [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80
Dec 27 23:00:45 DiskStation kernel: [1894269.587216]  [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240
Dec 27 23:00:45 DiskStation kernel: [1894269.593519]  [<ffffffff8110d179>] ? update_time+0x79/0xc0
Dec 27 23:00:45 DiskStation kernel: [1894269.599131]  [<ffffffff81110d19>] ? mnt_clone_write+0x9/0x30
Dec 27 23:00:45 DiskStation kernel: [1894269.605005]  [<ffffffff8110d257>] ? file_update_time+0x97/0xf0
Dec 27 23:00:45 DiskStation kernel: [1894269.611049]  [<ffffffff810b2bda>] ? __generic_file_aio_write+0x18a/0x3f0
Dec 27 23:00:45 DiskStation kernel: [1894269.617959]  [<ffffffff810b2eaa>] ? generic_file_aio_write+0x6a/0xe0
Dec 27 23:00:45 DiskStation kernel: [1894269.624510]  [<ffffffff8118a9c8>] ? ext4_file_write+0xc8/0x420
Dec 27 23:00:45 DiskStation kernel: [1894269.630549]  [<ffffffff810fec4c>] ? filename_lookup.isra.35+0x2c/0x80
Dec 27 23:00:45 DiskStation kernel: [1894269.637183]  [<ffffffff811033ad>] ? user_path_at_empty+0x6d/0xc0
Dec 27 23:00:45 DiskStation kernel: [1894269.643386]  [<ffffffff810eed8b>] ? do_sync_write+0x6b/0xa0
Dec 27 23:00:45 DiskStation kernel: [1894269.649156]  [<ffffffff810efd7b>] ? vfs_write+0xcb/0x360
Dec 27 23:00:45 DiskStation kernel: [1894269.654676]  [<ffffffff8102e3d1>] ? sys32_stat64+0x21/0x30
Dec 27 23:00:45 DiskStation kernel: [1894269.660365]  [<ffffffff810f059d>] ? SyS_write+0x6d/0xc0
Dec 27 23:00:45 DiskStation kernel: [1894269.665806]  [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e
Dec 28 00:37:18 DiskStation ddnsd: ddnsd.c:2912 DDNS Expired. UpdateAll.
Dec 28 00:37:21 DiskStation ddnsd: ddnsd.c:1968 Success to update [xxx.synology.me] with IP [xx.x.xx.xx] at [Synology]

Voila mes derniers logues depuis le 15 decembre. Je vois surtout un problème de DDns car j'ai un soucis de réseau environnement (vu hier dans EZ-internet).

Je vais voir plus tard pour le réglé. Problème car j'ai deux routeurs (livebox + Asus).

 

Pour le usb externe, j'avais essayé d'installer un boitier pour lire mes 6to mais le boitier est trop vieux et ne pouvait pas lire autant donc je l'ai retirer. Je pensais faire une copie des données directement pour réduire mes temps de transfert.

 

Il me reste 2933.6 min avec 21860K/s

Modifié par cocolabombe0

Partager ce message


Lien à poster
Partager sur d’autres sites

Oh oui bien avancé

28 decembre 01h

DiskStation> cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md2 : active raid6 sda5[0] sde5[4] sdd5[3] sdc5[2] sdb5[1]
      11706850944 blocks super 1.2 level 6, 64k chunk, algorithm 2 [5/5] [UUUUU]
      [>....................]  reshape =  1.3% (54279860/3902283648) finish=2933.6min speed=21860K/sec

md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] sde2[4]
      2097088 blocks [5/5] [UUUUU]

md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] sde1[4]
      2490176 blocks [5/5] [UUUUU]

unused devices: <none>

29 Décembre 22h15

DiskStation> cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md2 : active raid6 sda5[0] sde5[4] sdd5[3] sdc5[2] sdb5[1]
      11706850944 blocks super 1.2 level 6, 64k chunk, algorithm 2 [5/5] [UUUUU]
      [=================>...]  reshape = 89.6% (3498124416/3902283648) finish=329.6min speed=20434K/sec

md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] sde2[4]
      2097088 blocks [5/5] [UUUUU]

md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] sde1[4]
      2490176 blocks [5/5] [UUUUU]

unused devices: <none>

 

Modifié par cocolabombe0

Partager ce message


Lien à poster
Partager sur d’autres sites

Bonsoir, je pense que c'est terminer.

DiskStation>  cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md2 : active raid6 sda5[0] sde5[4] sdd5[3] sdc5[2] sdb5[1]
      11706850944 blocks super 1.2 level 6, 64k chunk, algorithm 18 [5/5] [UUUUU]

md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] sde2[4]
      2097088 blocks [5/5] [UUUUU]

md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] sde1[4]
      2490176 blocks [5/5] [UUUUU]

unused devices: <none>

Mais j'ai un problème. 

Je n'avais plus accès à mon interface DSM depuis la mise à jour du raid et là, accès refusé

Edit: dans synology assistant, je suis en non configuré. Ca veut dire que je dois tout réinstallé? Si oui, j'ai perdu mon temps pour faire le changement de raid?

Modifié par cocolabombe0

Partager ce message


Lien à poster
Partager sur d’autres sites
Il y a 8 heures, cocolabombe0 a dit :

Edit: dans synology assistant, je suis en non configuré. Ca veut dire que je dois tout réinstallé? Si oui, j'ai perdu mon temps pour faire le changement de raid?

Si tu as encore accès au SSH non, tu n'as pas tout perdu, au pire il faudra réinstaller le système (pas d'impact sur les données), c'est peut être juste l'interface web du syno qui s'est vautrée (changer de type de raid c'est assez violent en terme de ressources).

Je n'ai pas la commande sous la main pour relancer l'interface, mais si tu as un backup de tes données, tu peux tenter de rebooter le nas, sauf si @gaetan.cambier a d'autres manip à te faire faire avant.

Partager ce message


Lien à poster
Partager sur d’autres sites

perso, qd on lis les log, c'est qd meme inquétant : des call trace sans arret, alors, les call trace, c'est un truc qui plante, une fois ca peux arriver, mais la, c'est loin d'etre normal !

si on essaye de savoir d'ou il vient :

Dec 27 23:00:44 DiskStation kernel: [1894269.402634] Call Trace:
Dec 27 23:00:44 DiskStation kernel: [1894269.405281]  [<ffffffff811ce47f>] ? start_this_handle+0x39f/0x4c0
Dec 27 23:00:44 DiskStation kernel: [1894269.411566]  [<ffffffff81054560>] ? finish_wait+0xa0/0xa0
Dec 27 23:00:44 DiskStation kernel: [1894269.417159]  [<ffffffff811ce7ba>] ? jbd2__journal_start+0xda/0x150
Dec 27 23:00:44 DiskStation kernel: [1894269.423529]  [<ffffffff811957ba>] ? ext4_dirty_inode+0x2a/0x80
Dec 27 23:00:44 DiskStation kernel: [1894269.429555]  [<ffffffff8111a8bb>] ? __mark_inode_dirty+0x3b/0x240
Dec 27 23:00:44 DiskStation kernel: [1894269.435835]  [<ffffffff8110d179>] ? update_time+0x79/0xc0
Dec 27 23:00:44 DiskStation kernel: [1894269.441441]  [<ffffffff81110d19>] ? mnt_clone_write+0x9/0x30
Dec 27 23:00:44 DiskStation kernel: [1894269.447281]  [<ffffffff8110d257>] ? file_update_time+0x97/0xf0
Dec 27 23:00:44 DiskStation kernel: [1894269.453328]  [<ffffffff810b2bda>] ? __generic_file_aio_write+0x18a/0x3f0
Dec 27 23:00:44 DiskStation kernel: [1894269.460242]  [<ffffffff810b2eaa>] ? generic_file_aio_write+0x6a/0xe0
Dec 27 23:00:44 DiskStation kernel: [1894269.466809]  [<ffffffff8118a9c8>] ? ext4_file_write+0xc8/0x420
Dec 27 23:00:44 DiskStation kernel: [1894269.472840]  [<ffffffff810d9a62>] ? page_add_new_anon_rmap+0x32/0xf0
Dec 27 23:00:45 DiskStation kernel: [1894269.479405]  [<ffffffff810d064c>] ? handle_pte_fault+0x8ac/0x920
Dec 27 23:00:45 DiskStation kernel: [1894269.485616]  [<ffffffff810eed8b>] ? do_sync_write+0x6b/0xa0
Dec 27 23:00:45 DiskStation kernel: [1894269.491375]  [<ffffffff810efd7b>] ? vfs_write+0xcb/0x360
Dec 27 23:00:45 DiskStation kernel: [1894269.496887]  [<ffffffff81075d6a>] ? getnstimeofday+0xa/0x30
Dec 27 23:00:45 DiskStation kernel: [1894269.502665]  [<ffffffff810f073d>] ? SyS_pwrite64+0x9d/0xb0
Dec 27 23:00:45 DiskStation kernel: [1894269.508371]  [<ffffffff8148d711>] ? sysenter_dispatch+0x7/0x1e

si on regarde, on voit les mot journal, ext4, inode, dirty  write --> totue des chose qui doivent faire reference au système de fichier :s

quand à la modification de ton raid ...

Il y a 17 heures, cocolabombe0 a dit :

md2 : active raid6 sda5[0] sde5[4] sdd5[3] sdc5[2] sdb5[1]

je m'en doutait dès le départ qd il y a eu le message suivant :

Le 27/12/2015 at 21:15, cocolabombe0 a dit :

DiskStation> mdadm: /dev/md2: could not set level to raid5

sans compter que le reshape devait noté raid5 et pas 6

bref, tu est resté en raid 6, mais toute facon, on ne pouvais rien faire, le raid, une fois la commande lancée, faut jamais essayé de l'arréte

 

pour le problème de l'interface graphique et du nas non initialisé, c pas normal non plus, comme je l'avais dis, au pire l'interface du gestionnaire de volume pouvais affiché quelque chose d'incohérent le temps de la migration (qui n'a en fait pas eu lieu pour finir) mais rien de plus, le nas devait resté accessible, fonctionnel (un peu plus lent vu la reconstruction), rien de plus

perso, j'ai fait l'inverse : passer de shr-1 à shr-2 (officiellement non supporté) et aucun problème, et c'est à la limite plus complique que passer de shr2 -> 1 

en plus, qd j'ai vu les tout de recontruction, je l'ai annoncé que j'aimais pas ca, car un nas comme le tient, ca tient un debit de 15000 sans problème, tu est passe à un moment à 2ko/sec, moi je ferait franchement un test smart approfondi de tous les disque, car meme si le dsm te mettait un statut normal, faut regardé le detail

pour commancer, poste deja l'etat smart actuel de tes disk grace à ses commandes :

 smartctl -d sat -a /dev/sda
 smartctl -d sat -a /dev/sdb
 smartctl -d sat -a /dev/sdc
 smartctl -d sat -a /dev/sdd
 smartctl -d sat -a /dev/sde

ensuite, tu lance le test smart approfondi sur tous les disques :

smartctl -d sat -t long /dev/sda
smartctl -d sat -t long /dev/sdb
smartctl -d sat -t long /dev/sdc
smartctl -d sat -t long /dev/sdd
smartctl -d sat -t long /dev/sde

commence par la, je suis presque certain qu'il y a un problème disque (et tous le reste sont les conséquences)

Partager ce message


Lien à poster
Partager sur d’autres sites
DiskStation>  smartctl -d sat -a /dev/sda
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1331PAK9U6US
LU WWN Device Id: 5 000cca 22beebc86
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 22:59:51 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 575) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -       82
  3 Spin_Up_Time            0x0007   141   141   024    Pre-fail  Always       -       527 (Average 565)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       149
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -       34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17217
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       34
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       821
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       821
194 Temperature_Celsius     0x0002   136   136   000    Old_age   Always       -       44 (Min/Max 21/55)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     17207         -
# 2  Short offline       Completed without error       00%     11750         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sdb
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1331PAK9WGTS
LU WWN Device Id: 5 000cca 22beec4ff
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 22:59:53 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 560) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -       78
  3 Spin_Up_Time            0x0007   137   137   024    Pre-fail  Always       -       532 (Average 595)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       153
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -       34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17217
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       39
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       831
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       831
194 Temperature_Celsius     0x0002   136   136   000    Old_age   Always       -       44 (Min/Max 19/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     17145         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sdc
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK2301PAK3162T
LU WWN Device Id: 5 000cca 22beba81d
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 22:59:55 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 566) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -       82
  3 Spin_Up_Time            0x0007   139   139   024    Pre-fail  Always       -       538 (Average 575)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       149
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   119   119   020    Pre-fail  Offline      -       35
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17215
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       35
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       824
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       824
194 Temperature_Celsius     0x0002   142   142   000    Old_age   Always       -       42 (Min/Max 20/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     17144         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sdd
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1301PAKNWLJS
LU WWN Device Id: 5 000cca 22bf3c588
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 22:59:57 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 559) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -       77
  3 Spin_Up_Time            0x0007   134   134   024    Pre-fail  Always       -       549 (Average 603)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       147
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -       34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17217
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       33
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       821
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       821
194 Temperature_Celsius     0x0002   146   146   000    Old_age   Always       -       41 (Min/Max 21/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     17146         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sdesmartctl -d sat -t long /dev/sda
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

ERROR: smartctl takes ONE device name as the final command-line argument.
You have provided 2 device names:
/dev/sdesmartctl
/dev/sda

Use smartctl -h to get a usage summary

DiskStation> smartctl -d sat -t long /dev/sdb
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 560 minutes for test to complete.
Test will complete after Thu Dec 31 08:20:41 2015

Use smartctl -X to abort test.
Smartctl: Failed to send email notify msg to scemd.
DiskStation> smartctl -d sat -t long /dev/sdc
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 566 minutes for test to complete.
Test will complete after Thu Dec 31 08:26:43 2015

Use smartctl -X to abort test.
Smartctl: Failed to send email notify msg to scemd.
DiskStation> smartctl -d sat -t long /dev/sdd
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 559 minutes for test to complete.
Test will complete after Thu Dec 31 08:19:46 2015

Use smartctl -X to abort test.
Smartctl: Failed to send email notify msg to scemd.
DiskStation> clear
DiskStation> smartctl -d sat -a /dev/sda
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1331PAK9U6US
LU WWN Device Id: 5 000cca 22beebc86
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 23:01:20 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 575) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -       82
  3 Spin_Up_Time            0x0007   141   141   024    Pre-fail  Always       -       527 (Average 565)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       149
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -       34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17217
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       34
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       821
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       821
194 Temperature_Celsius     0x0002   136   136   000    Old_age   Always       -       44 (Min/Max 21/55)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     17207         -
# 2  Short offline       Completed without error       00%     11750         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sdb
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1331PAK9WGTS
LU WWN Device Id: 5 000cca 22beec4ff
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 23:01:21 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                                        90% of test remaining.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 560) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -       78
  3 Spin_Up_Time            0x0007   137   137   024    Pre-fail  Always       -       532 (Average 595)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       153
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -       34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17217
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       39
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       831
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       831
194 Temperature_Celsius     0x0002   133   133   000    Old_age   Always       -       45 (Min/Max 19/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     17145         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sdc
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK2301PAK3162T
LU WWN Device Id: 5 000cca 22beba81d
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 23:01:23 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                                        90% of test remaining.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 566) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -       82
  3 Spin_Up_Time            0x0007   139   139   024    Pre-fail  Always       -       538 (Average 575)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       149
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   119   119   020    Pre-fail  Offline      -       35
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17215
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       35
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       824
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       824
194 Temperature_Celsius     0x0002   142   142   000    Old_age   Always       -       42 (Min/Max 20/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     17144         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sdd
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1301PAKNWLJS
LU WWN Device Id: 5 000cca 22bf3c588
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 23:01:25 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                                        90% of test remaining.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 559) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -       77
  3 Spin_Up_Time            0x0007   134   134   024    Pre-fail  Always       -       549 (Average 603)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       147
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -       34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17218
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       33
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       821
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       821
194 Temperature_Celsius     0x0002   142   142   000    Old_age   Always       -       42 (Min/Max 21/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     17146         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sde
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1331PAKA5V3S
LU WWN Device Id: 5 000cca 22beee827
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 23:01:28 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 568) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -       78
  3 Spin_Up_Time            0x0007   138   138   024    Pre-fail  Always       -       517 (Average 601)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       151
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   119   119   020    Pre-fail  Offline      -       35
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17216
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       36
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       824
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       824
194 Temperature_Celsius     0x0002   150   150   000    Old_age   Always       -       40 (Min/Max 15/55)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     17145         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Et la deuxième requète:

DiskStation> smartctl -d sat -t long /dev/sdb
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line                                                                                                                                                                                                                                           mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mod                                                                                                                                                                                                                                          e" successful.
Testing has begun.
Please wait 560 minutes for test to complete.
Test will complete after Thu Dec 31 08:20:41 2015

Use smartctl -X to abort test.
Smartctl: Failed to send email notify msg to scemd.
DiskStation> smartctl -d sat -t long /dev/sdc
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line                                                                                                                                                                                                                                           mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mod                                                                                                                                                                                                                                          e" successful.
Testing has begun.
Please wait 566 minutes for test to complete.
Test will complete after Thu Dec 31 08:26:43 2015

Use smartctl -X to abort test.
Smartctl: Failed to send email notify msg to scemd.
DiskStation> smartctl -d sat -t long /dev/sdd
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line                                                                                                                                                                                                                                           mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mod                                                                                                                                                                                                                                          e" successful.
Testing has begun.
Please wait 559 minutes for test to complete.
Test will complete after Thu Dec 31 08:19:46 2015

Use smartctl -X to abort test.
Smartctl: Failed to send email notify msg to scemd.
DiskStation> clear
DiskStation> smartctl -d sat -a /dev/sda
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1331PAK9U6US
LU WWN Device Id: 5 000cca 22beebc86
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 23:01:20 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support                                                                                                                                                                                                                                          .
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 575) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAI                                                                                                                                                                                                                                          LED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -                                                                                                                                                                                                                                                 82
  3 Spin_Up_Time            0x0007   141   141   024    Pre-fail  Always       -                                                                                                                                                                                                                                                 527 (Average 565)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 149
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -                                                                                                                                                                                                                                                 34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -                                                                                                                                                                                                                                                 17217
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 34
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 821
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 821
194 Temperature_Celsius     0x0002   136   136   000    Old_age   Always       -                                                                                                                                                                                                                                                 44 (Min/Max 21/55)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -                                                                                                                                                                                                                                                 0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -                                                                                                                                                                                                                                                 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of                                                                                                                                                                                                                                          _first_error
# 1  Extended offline    Completed without error       00%     17207         -
# 2  Short offline       Completed without error       00%     11750         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sdb
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1331PAK9WGTS
LU WWN Device Id: 5 000cca 22beec4ff
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 23:01:21 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                                        90% of test remaining.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support                                                                                                                                                                                                                                          .
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 560) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAI                                                                                                                                                                                                                                          LED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -                                                                                                                                                                                                                                                 78
  3 Spin_Up_Time            0x0007   137   137   024    Pre-fail  Always       -                                                                                                                                                                                                                                                 532 (Average 595)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 153
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -                                                                                                                                                                                                                                                 34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -                                                                                                                                                                                                                                                 17217
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 39
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 831
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 831
194 Temperature_Celsius     0x0002   133   133   000    Old_age   Always       -                                                                                                                                                                                                                                                 45 (Min/Max 19/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -                                                                                                                                                                                                                                                 0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -                                                                                                                                                                                                                                                 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of                                                                                                                                                                                                                                          _first_error
# 1  Short offline       Completed without error       00%     17145         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sdc
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK2301PAK3162T
LU WWN Device Id: 5 000cca 22beba81d
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 23:01:23 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                                        90% of test remaining.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support                                                                                                                                                                                                                                          .
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 566) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAI                                                                                                                                                                                                                                          LED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -                                                                                                                                                                                                                                                 82
  3 Spin_Up_Time            0x0007   139   139   024    Pre-fail  Always       -                                                                                                                                                                                                                                                 538 (Average 575)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 149
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  8 Seek_Time_Performance   0x0005   119   119   020    Pre-fail  Offline      -                                                                                                                                                                                                                                                 35
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -                                                                                                                                                                                                                                                 17215
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 35
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 824
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 824
194 Temperature_Celsius     0x0002   142   142   000    Old_age   Always       -                                                                                                                                                                                                                                                 42 (Min/Max 20/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -                                                                                                                                                                                                                                                 0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -                                                                                                                                                                                                                                                 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of                                                                                                                                                                                                                                          _first_error
# 1  Short offline       Completed without error       00%     17144         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sdd
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1301PAKNWLJS
LU WWN Device Id: 5 000cca 22bf3c588
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 23:01:25 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                                        90% of test remaining.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support                                                                                                                                                                                                                                          .
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 559) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAI                                                                                                                                                                                                                                          LED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -                                                                                                                                                                                                                                                 77
  3 Spin_Up_Time            0x0007   134   134   024    Pre-fail  Always       -                                                                                                                                                                                                                                                 549 (Average 603)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 147
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -                                                                                                                                                                                                                                                 34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -                                                                                                                                                                                                                                                 17218
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 33
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 821
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 821
194 Temperature_Celsius     0x0002   142   142   000    Old_age   Always       -                                                                                                                                                                                                                                                 42 (Min/Max 21/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -                                                                                                                                                                                                                                                 0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -                                                                                                                                                                                                                                                 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of                                                                                                                                                                                                                                          _first_error
# 1  Short offline       Completed without error       00%     17146         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sde
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1331PAKA5V3S
LU WWN Device Id: 5 000cca 22beee827
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 30 23:01:28 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support                                                                                                                                                                                                                                          .
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 568) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAI                                                                                                                                                                                                                                          LED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -                                                                                                                                                                                                                                                 78
  3 Spin_Up_Time            0x0007   138   138   024    Pre-fail  Always       -                                                                                                                                                                                                                                                 517 (Average 601)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 151
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
  8 Seek_Time_Performance   0x0005   119   119   020    Pre-fail  Offline      -                                                                                                                                                                                                                                                 35
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -                                                                                                                                                                                                                                                 17216
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -                                                                                                                                                                                                                                                 0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 36
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 824
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 824
194 Temperature_Celsius     0x0002   150   150   000    Old_age   Always       -                                                                                                                                                                                                                                                 40 (Min/Max 15/55)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -                                                                                                                                                                                                                                                 0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -                                                                                                                                                                                                                                                 0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -                                                                                                                                                                                                                                                 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of                                                                                                                                                                                                                                          _first_error
# 1  Short offline       Completed without error       00%     17145         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Quelques problèmes de copier coller 

Modifié par cocolabombe0

Partager ce message


Lien à poster
Partager sur d’autres sites
il y a 26 minutes, cocolabombe0 a dit :

Test will complete after Thu Dec 31 08:26:43 2015

la reponses des scan complet sera pour deman, pour l'instant tout est ok ;)

demain, c'est le reveillon, je serait pas trop dispo, enfin, comme tous le monde ;)

Partager ce message


Lien à poster
Partager sur d’autres sites

tu refait la première série commande que j'ai donné, elle te donne egalement l'etat d'avancement du test smart (par 10%). D'experience, les % ne sont pas très fiable pour en deduire le temps, c'est comme les barre d'install sous windows :p

Partager ce message


Lien à poster
Partager sur d’autres sites
DiskStation> smartctl -d sat -a /dev/sda
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1331PAK9U6US
LU WWN Device Id: 5 000cca 22beebc86
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Dec 31 11:35:30 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 575) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -       82
  3 Spin_Up_Time            0x0007   141   141   024    Pre-fail  Always       -       527 (Average 565)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       149
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -       34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17229
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       34
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       821
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       821
194 Temperature_Celsius     0x0002   136   136   000    Old_age   Always       -       44 (Min/Max 21/55)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     17226         -
# 2  Extended offline    Completed without error       00%     17207         -
# 3  Short offline       Completed without error       00%     11750         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
DiskStation> smartctl -d sat -a /dev/sdb
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1331PAK9WGTS
LU WWN Device Id: 5 000cca 22beec4ff
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Dec 31 11:39:18 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 560) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -       78
  3 Spin_Up_Time            0x0007   137   137   024    Pre-fail  Always       -       532 (Average 595)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       153
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -       34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17229
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       39
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       831
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       831
194 Temperature_Celsius     0x0002   133   133   000    Old_age   Always       -       45 (Min/Max 19/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     17225         -
# 2  Short offline       Completed without error       00%     17145         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sdc
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK2301PAK3162T
LU WWN Device Id: 5 000cca 22beba81d
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Dec 31 11:39:20 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 566) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -       82
  3 Spin_Up_Time            0x0007   139   139   024    Pre-fail  Always       -       538 (Average 575)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       149
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   119   119   020    Pre-fail  Offline      -       35
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17227
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       35
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       825
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       825
194 Temperature_Celsius     0x0002   139   139   000    Old_age   Always       -       43 (Min/Max 20/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     17224         -
# 2  Short offline       Completed without error       00%     17144         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sdd
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1301PAKNWLJS
LU WWN Device Id: 5 000cca 22bf3c588
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Dec 31 11:39:21 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 559) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -       77
  3 Spin_Up_Time            0x0007   134   134   024    Pre-fail  Always       -       549 (Average 603)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       147
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -       34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17230
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       33
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       822
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       822
194 Temperature_Celsius     0x0002   139   139   000    Old_age   Always       -       43 (Min/Max 21/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     17226         -
# 2  Short offline       Completed without error       00%     17146         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

DiskStation>  smartctl -d sat -a /dev/sde
smartctl 6.2 (build date Oct 28 2015) [x86_64-linux-3.10.35] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HGST HDS724040ALE640
Serial Number:    PK1331PAKA5V3S
LU WWN Device Id: 5 000cca 22beee827
Firmware Version: MJAOA580
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Dec 31 11:39:34 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   24) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 568) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -       78
  3 Spin_Up_Time            0x0007   138   138   024    Pre-fail  Always       -       517 (Average 601)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       151
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   119   119   020    Pre-fail  Offline      -       35
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17229
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       36
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       825
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       825
194 Temperature_Celsius     0x0002   146   146   000    Old_age   Always       -       41 (Min/Max 15/55)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     17225         -
# 2  Short offline       Completed without error       00%     17145         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Test doit être terminé. Aucun erreur je crois.

Partager ce message


Lien à poster
Partager sur d’autres sites

Pour le smart, à priori c'est ok (je n'ai regardé dans le détail).

il y a 55 minutes, cocolabombe0 a dit :

Je n'arrive pas à configurer depuis le logiciel. J'ai essayé en manuel et en DHCP mais erreur de configuration.

? tu parle de quoi (l’assistant, dsm, ...?)

Partager ce message


Lien à poster
Partager sur d’autres sites

Du logiciel Assistant . 

Erreur La Configuration rapide ne s'est pas terminée en raison d'une perte de connexion. Fermez le dialogue et réessayez ultérieusement.

Je n'ai plus accès au DSM. 

Je pense que cela peut venir de mon routeur (aucune règle de créée car je ne sais pas comment les faires). 

En faite, j'ai:

Livebox (192.168.1.1) -> Décodeur Orange
                                    -> Routeur Asus (RT-AC68U)
                                    -> Téléphone par internet
 

Sur le routeur, il y a tous mes périphérique TV, ordi, Hub, switch, box domotique, etc. Tout ce qu'il y a le réseau internet.

J'ai pris toutes les adresses attribué en DHCP vers une adresse Fixe.

J'avais essayé en désactivant le DHCP Orange et le wifi mais ça ne suffit pas.

Modifié par cocolabombe0

Partager ce message


Lien à poster
Partager sur d’autres sites

Je l'ai branché direct sur le pc. Même problème. 

J'ai redémarré le synology et tout refonctionne. 

J'ai supprimé mon volume des 5 disques, retirer les deux en trop et refait un volume en SHR 1 disque

Partager ce message


Lien à poster
Partager sur d’autres sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Invité
Répondre à ce sujet…

×   Collé en tant que texte enrichi.   Coller en tant que texte brut à la place

  Seulement 75 émoticônes maximum sont autorisées.

×   Votre lien a été automatiquement intégré.   Afficher plutôt comme un lien

×   Votre contenu précédent a été rétabli.   Vider l’éditeur

×   Vous ne pouvez pas directement coller des images. Envoyez-les depuis votre ordinateur ou insérez-les depuis une URL.