Kalilu Posté(e) le 18 février 2010 Posté(e) le 18 février 2010 Bonjour à tous, Nous avons eut la nuit dernière une panne importante de courant qui a durée toute la nuit... Bref ce matin un collègue essaye de redémarrer notre ds410j et là (c'est le drame). Volume en panne. Mon collègue qui a redémarrer la bête a eut le malheur d'essayer de débrancher et redémarrer sans les disques ou avec certains d'entre eux... Bref voici l'étendu des dégâts : Coté ssh /dev/md2: Version : 00.90 Creation Time : Fri Jan 22 14:50:41 2010 Raid Level : raid5 Array Size : 5851113600 (5580.06 GiB 5991.54 GB) Used Dev Size : 1950371200 (1860.02 GiB 1997.18 GB) Raid Devices : 4 Total Devices : 1 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Feb 18 23:38:42 2010 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K UUID : fa6f598f:01e3c275:e42ce2c6:30dc1389 Events : 0.284 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 2 8 35 2 active sync /dev/sdc3 3 0 0 3 removed Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4] md2 : active raid5 sdc3[2] 5851113600 blocks level 5, 64k chunk, algorithm 2 [4/1] [__U_] md1 : active raid1 sdc2[2] 522048 blocks [4/1] [__U_] md0 : active raid1 sdc1[2] 2489920 blocks [4/1] [__U_] unused devices: <none> isk /dev/sda: 243201 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sda1 0+ 309 310- 2490043+ fd Linux raid autodetect /dev/sda2 310 374 65 522112+ fd Linux raid autodetect /dev/sda3 391 243200 242810 1950371325 fd Linux raid autodetect /dev/sda4 0 - 0 0 0 Empty Disk /dev/sdb: 243201 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdb1 0+ 309 310- 2490043+ fd Linux raid autodetect /dev/sdb2 310 374 65 522112+ fd Linux raid autodetect /dev/sdb3 391 243200 242810 1950371325 fd Linux raid autodetect /dev/sdb4 0 - 0 0 0 Empty Disk /dev/sdc: 243201 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdc1 0+ 309 310- 2490043+ fd Linux raid autodetect /dev/sdc2 310 374 65 522112+ fd Linux raid autodetect /dev/sdc3 391 243200 242810 1950371325 fd Linux raid autodetect /dev/sdc4 0 - 0 0 0 Empty Disk /dev/sdd: 243201 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdd1 0+ 309 310- 2490043+ fd Linux raid autodetect /dev/sdd2 310 374 65 522112+ fd Linux raid autodetect /dev/sdd3 391 243200 242810 1950371325 fd Linux raid autodetect /dev/sdd4 0 - 0 0 0 Empty J'ai tenté mdadm -A /dev/md2 /dev/sda3 /dev/sdb3 /dev/sdc3 /dev/sdd3 --run mais ca me fait un : mdadm: /dev/md2 has been started with 1 drive (out of 4) and 1 spare. Pensez-vous que c'est rattrapable ? ou bien un cierge ? 0 Citer
ikeke Posté(e) le 18 février 2010 Posté(e) le 18 février 2010 Bonsoir, Personnellement, j'enverrais directement un mail au support synology. Ils sont assez r 0 Citer
Kalilu Posté(e) le 18 février 2010 Auteur Posté(e) le 18 février 2010 Bonsoir, Personnellement, j'enverrais directement un mail au support synology. Ils sont assez réactifs en général sur ce genre de problème. Ils te demanderont des infos puis se connecteront sur le NAS pour essayer de régler ca. Merci c'est en cours depuis ce matin, mais c'est visiblement le nouvel an chinois, il indique sur le ticket qu'il sont off depuis jusqu'au 21/02. On va donc bruler un cierge :-) et être patient, très patient :-) ++ 0 Citer
romain74960 Posté(e) le 19 février 2010 Posté(e) le 19 février 2010 salut cela ressemble a mon crash sur mon Dx5 nefait rien et attend le support Syno tu peut deja preparer un compte avec tous les droits afin qu ils puisse se connecter et regarde pour ouvrir les ports sur ta box ils vont te dire lequel (je ne sait plus) @+ Romain 0 Citer
Messages recommandés
Rejoindre la conversation
Vous pouvez publier maintenant et vous inscrire plus tard. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.