Tostos94 Posté(e) le 2 avril 2019 Partager Posté(e) le 2 avril 2019 une mise à jour est disponible sur le site Synology (2019-03-21) Important Note The update is expected to be available for all regions within the next few weeks, although the time of release in each region may vary slightly. What's New Added support for IPv6 setup and DS-Lite options during first time installation. Fixed Issues Fixed an issue where the 5GHz-1 band might fail to work when the Wi-Fi system is setup to appoint Ethernet as uplink and tri-band auto selection is enabled. Fixed an issue where SRM might not be able to transfer data properly when there are multiple subnets in the local network. Fixed an issue where Guest Network might be enabled after system reboot, when it was originally disabled and the Wi-Fi system has been setup to appoint Ethernet as uplink. Fixed an issue where the primary Wi-Fi point might not display the device list properly when under Wireless AP mode. Fixed an issue where the wrong LED indicator might light up for LAN 1 on RT2600ac. Fixed an issue where SRM might not display the correct version after it was updated from a previous version. Fixed an issue where SRM might not save PPTP settings during first time installation. Fixed an issue where Synology Router might not be able to access the Internet when both IPTV and PPPoE Relay options are enabled. Fixed an issue where the System Database might not be able to update. Fixed an issue where WPS might not work properly in a Wi-Fi system. Known Issues and Limitations Additional Wi-Fi points must be connected directly to the primary Wi-Fi point via Ethernet cable if the Wi-Fi system is setup to appoint Ethernet as uplink. Lien vers le commentaire Partager sur d’autres sites More sharing options...
unPixel Posté(e) le 2 avril 2019 Partager Posté(e) le 2 avril 2019 Merci pour l'info, j'étais déjà au courant depuis deux jours mais je me précipite pas... Surtout que j'utilise mon ONT direct sur mon routeur sans le modem de chez SFR et que j'ai toujours la crainte de devoir rebranché leur boitier 😞 Une fois mon backup terminé, je la ferai certainement. Lien vers le commentaire Partager sur d’autres sites More sharing options...
Einsteinium Posté(e) le 2 avril 2019 Partager Posté(e) le 2 avril 2019 Je l’ai déjà depuis sa sortie pour ma part, aucun soucis... Part contre il y a un problème avec le compteur du pare feu, qui sera fixé au prochain update. Lien vers le commentaire Partager sur d’autres sites More sharing options...
unPixel Posté(e) le 2 avril 2019 Partager Posté(e) le 2 avril 2019 Il y a déjà des soucis avec ce compteur. Moi je le regarde même plus tellement c'est faussé ! Lien vers le commentaire Partager sur d’autres sites More sharing options...
Einsteinium Posté(e) le 2 avril 2019 Partager Posté(e) le 2 avril 2019 Non c’est réel, chaque requête sur ses ports, crédité de 1, un port scan est suffisant. Lien vers le commentaire Partager sur d’autres sites More sharing options...
unPixel Posté(e) le 3 avril 2019 Partager Posté(e) le 3 avril 2019 Et bien moi bizarrement, j'ai pas des bons chiffres. C'est surtout pour que ça que je fais pas attention à ces statistiques. Lien vers le commentaire Partager sur d’autres sites More sharing options...
Tostos94 Posté(e) le 3 avril 2019 Auteur Partager Posté(e) le 3 avril 2019 faudrait que je regarde si j'ai le souci sur le compteur aussi Lien vers le commentaire Partager sur d’autres sites More sharing options...
Messages recommandés
Archivé
Ce sujet est désormais archivé et ne peut plus recevoir de nouvelles réponses.