Bonjour,

Si vous n'étiez pas inscrit, vous n'avez pas accès malheureusement à cette preview de DSM 7, je proposes donc les fichiers par uptobox :

DSM : https://uptobox.com/user_public?hash=98f8a3b403d37ba3&folder=2144403536

Packages : https://uptobox.com/user_public?hash=767752b343a8ee5b&folder=2144600144

Utilities : https://uptobox.com/user_public?hash=cdc4804748ffcc40&folder=2144796752

(Pour Utilities : windows 64 bits et ubuntu 64 bits, manifestez vous plus bas pour d'autres systèmes)

Active Insight : IOS : http://sy.to/activeinsightios - Android : http://sy.to/activeinsightandroid

Synology Photos : IOS : http://sy.to/synologyphotosios - Android : http://sy.to/synologyphotosandroid

Secure SignIn : IOS : http://sy.to/securesigninios - Android : http://sy.to/securesigninandroid

Il est possible que j'en oublie, dites le 🙂

Un petit merci pour le temps pris si vous prenez 😉

-----------------------------------------------------------------------------------------------------

DSM 7.0 Preview is not available on the following models. But don't worry, these models will join the upcoming DSM 7.0 Beta or DSM 7.0 Official.
FS6400, FS3600, SA3600, SA3200D, RC18015xs+, DS1520+, DS920+, DS720+, DS420+, DS220+, DS220j

Important Upgrade Notes

Before Update

1. DSM 7.0 can only be updated from DSM 6.2.
2. Reserve extra time to complete DSM 7.0 update. The DSM update takes 10 to 20 minutes, while package update may take more than an hour. The actual time depends on the computing power of your model, the number of media indexing files, and the number of packages installed.

DSM

1. USB devices (Wi-Fi dongle, Bluetooth dongle, 3G/4G dongle, USB DAC/speaker, and DTV dongle) are no longer supported. If your Synology NAS is currently connected via a wireless dongle, it will be disconnected after the update.
2. Creating SSD caches on block-level LUNs is no longer supported. Existing SSD cache for block LUNs will function normally after the update.
3. DDSM is incompatible with DSM 7.0. To continue using DDSM, you should retain the current DSM version. To update to DSM 7.0, please delete DDSM first.
4. To provide comprehensive TLS support and ensure compatibility, the TLS/SSL profile level in Modern compatibility will automatically change to Intermediate Compatibility after the update.
5. EZ-Internet is merged with Router Configuration in Control Panel. To set up port forwarding, go to Control Panel > External Access > Router Configuration.
6. Python3 is merged into DSM as a built-in service. The original Python3 package will be unavailable in Package Center and you can remove it manually.
7. The following DDNS providers are removed from the service provider list at Control Panel > External Access > DDNS:
   CloudNS, DNO-O-Matic, DNSEXIT, Dynamic DO!.jp, Joker.com, RU-CENTER, TwoDNS.de, Variomedia, Zoneedit.com

Packages

1. Synology Moments and Photo Station will be upgraded to and merged as Synology Photos. If you would like to use Synology Photos on your mobile devices, please install the iOS/Android app. See this page for more details.
2. Cloud Station Server and Cloud Station ShareSync will be upgraded to and merged with Synology Drive Server. If you are using any Cloud Station Suite applications (Cloud Station Server, Cloud Station Drive, Cloud Station Backup, Cloud Station ShareSync, or DS cloud), you must switch to their counterparts in the Synology Drive Suite to ensure compatibility. See this page for more details.
3. Active Backup for Business is incompatible with DSM 7.0 Preview. To continue using Active Backup for Business, you should retain the current DSM version.
4. Central Management System no longer supports managing Synology NAS with DSM version earlier than DSM 6.0. Managed servers that are unable to update to DSM 6.0 should be disjoined from Central Management System before the update.
5. DiXiM Media Server and sMedio DTCP Move are incompatible with DSM 7.0. To continue using these packages, you should retain the current DSM version. To update to DSM 7.0, please uninstall them in Package Center first.
6. MariaDB 5 is incompatible with DSM 7.0. To update to DSM 7.0, please install MariaDB 10, migrate the database, and uninstall MariaDB 5 in Package Center first.
7. Packages published by third-party developers are currently not supported. You can update the packages in Package Center when compatible versions are released.
8. The following packages are no longer supported:
   Cloud Station Server (replaced by Synology Drive Server), Cloud Station ShareSync (replaced by Synology Drive Server), Discourse, DokuWiki, Drupal, Drupal8, GitLab, GLPI, Java7, Java8, LimeSurvey, Logitech^® Media Server, LXQt, Magento, Magento2, MantisBT, Moments (replaced by Synology Photos), Mono, Moodle, Node.js 0.10, Node.js 0.12, Node.js v4, Node.js v6, Node.js v8, Odoo 8, OpenERP 6.1, OpenERP 7.0, OrangeHR, Orthanc, osCommerce, osTicket, PHP PEAR, Photo Station (replaced by Synology Photos), phpBB, Piwik, Podcast Generator, PrestaShop, PrestaShop1.7, Redmine, Ruby, Spree, SugarCRM, SVN, Synology File Manager, Tomcat6, Tomcat7, Webalizer

 

Release Notes

Before Update

1. DSM 7.0 can only be updated from DSM 6.2.
2. Reserve extra time to complete DSM 7.0 update. The DSM update takes 10 to 20 minutes, while package update may take more than an hour. The actual time depends on the computing power of your model, the number of media indexing files, and the number of packages installed.

DSM

1. USB devices (Wi-Fi dongle, Bluetooth dongle, 3G/4G dongle, USB DAC/speaker, and DTV dongle) are no longer supported. If your Synology NAS is currently connected via a wireless dongle, it will be disconnected after the update.
2. Creating SSD caches on block-level LUNs is no longer supported. Existing SSD cache for block LUNs will function normally after the update.
3. DDSM is incompatible with DSM 7.0. To continue using DDSM, you should retain the current DSM version. To update to DSM 7.0, please delete DDSM first.
4. To provide comprehensive TLS support and ensure compatibility, the TLS/SSL profile level in Modern compatibility will automatically change to Intermediate Compatibility after the update.
5. EZ-Internet is merged with Router Configuration in Control Panel. To set up port forwarding, go to Control Panel > External Access > Router Configuration.
6. Python3 is merged into DSM as a built-in service. The original Python3 package will be unavailable in Package Center and you can remove it manually.
7. The following DDNS providers are removed from the service provider list at Control Panel > External Access > DDNS:
   CloudNS, DNO-O-Matic, DNSEXIT, Dynamic DO!.jp, Joker.com, RU-CENTER, TwoDNS.de, Variomedia, Zoneedit.com

Packages

1. Synology Moments and Photo Station will be upgraded to and merged as Synology Photos. If you would like to use Synology Photos on your mobile devices, please install the iOS/Android app. See this page for more details.
2. Cloud Station Server and Cloud Station ShareSync will be upgraded to and merged with Synology Drive Server. If you are using any Cloud Station Suite applications (Cloud Station Server, Cloud Station Drive, Cloud Station Backup, Cloud Station ShareSync, or DS cloud), you must switch to their counterparts in the Synology Drive Suite to ensure compatibility. See this page for more details.
3. Active Backup for Business is incompatible with DSM 7.0 Preview. To continue using Active Backup for Business, you should retain the current DSM version.
4. Central Management System no longer supports managing Synology NAS with DSM version earlier than DSM 6.0. Managed servers that are unable to update to DSM 6.0 should be disjoined from Central Management System before the update.
5. DiXiM Media Server and sMedio DTCP Move are incompatible with DSM 7.0. To continue using these packages, you should retain the current DSM version. To update to DSM 7.0, please uninstall them in Package Center first.
6. MariaDB 5 is incompatible with DSM 7.0. To update to DSM 7.0, please install MariaDB 10, migrate the database, and uninstall MariaDB 5 in Package Center first.
7. Packages published by third-party developers are currently not supported. You can update the packages in Package Center when compatible versions are released.
8. The following packages are no longer supported:
   Cloud Station Server (replaced by Synology Drive Server), Cloud Station ShareSync (replaced by Synology Drive Server), Discourse, DokuWiki, Drupal, Drupal8, GitLab, GLPI, Java7, Java8, LimeSurvey, Logitech^® Media Server, LXQt, Magento, Magento2, MantisBT, Moments (replaced by Synology Photos), Mono, Moodle, Node.js 0.10, Node.js 0.12, Node.js v4, Node.js v6, Node.js v8, Odoo 8, OpenERP 6.1, OpenERP 7.0, OrangeHR, Orthanc, osCommerce, osTicket, PHP PEAR, Photo Station (replaced by Synology Photos), phpBB, Piwik, Podcast Generator, PrestaShop, PrestaShop1.7, Redmine, Ruby, Spree, SugarCRM, SVN, Synology File Manager, Tomcat6, Tomcat7, Webalizer

What’s New

1. Storage
   • A new revision of Storage Manager:
     • Added visuals of Synology NAS models with their drive slots, expansion units, and built-in M.2 slots to help users view drive status.
     • Enhanced usability with a clearer display of the relationship between storage pools, volumes, and SSD caches.
     • Enhanced the setup process of Hot Spare and Data Scrubbing.
     • Added a feature to guide users through configuring newly inserted drives.
   • New features for storage pools, volumes, and drives:
     • Enhanced the access performance of RAID 6 by 80% on Broadwellnk (FS1018, SA3400, RS1619xs+, DS3018xs) and Grantley (FS3017) CPUs.
     • Enhanced the access performance of degraded RAID 6 by 70%.
     • Added display of the storage usage of each category item on Btrfs volumes.
     • Added a new Fast Repair mechanism to reduce the time needed for RAID repair based on storage usage and thus reduce the time of RAID degradation.
     • Added the ability to replace a drive in a healthy storage pool with an unused one without interrupting services or causing storage pool degradation.
     • Added the ability to automatically replace “Critical” or “Failing” drives in protected storage pools with Hot Spare.
     • Added the Auto Repair feature to automatically run a RAID repair when a malfunctioned drive is replaced with a healthy one in the same drive slot.
     • Added the ability to eject a storage pool on an expansion unit to ensure the safe removal of drives without interrupting system services.
     • Added the ability to mount storage pools from drives that are inserted after the device has been powered on without interrupting system services.
     • Added support for Western Digital® Device Analytics™ (WDDA) health analytics service for compatible WD Purple™, Red™, and Red™ Pro drives.
   • New features for SSD Cache:
     • Added the ability to create and remove SSD caches without interrupting system services.
     • Added the new SSD Cache Advisor to monitor I/O accesses and provide more accurate capacity recommendations.
     • Added the ability to pin all Btrfs metadata to SSD caches to enhance the performance of accessing small files and shorten the response time when accessing files regularly.
     • Added the ability to activate automatic protection on SSD read-write caches with multi-drive fault tolerance.
     • Added support for the quick flush mechanism to speed up write-backs from SSD caches to HDDs when automatic protection is activated.
2. Resource Monitor
   • Revamped the display of recorded performance metrics with a finer granularity of data points and the ability to focus on certain time points.
   • Enhanced monitoring transparency of system services by separating larger, unrelated processes.
   • Added the ability to manage currently accessed files and their connected users to better handle locked files.
3. File System/File Services
   • Supports enabling/disabling file compression for shared folders created on DSM 7.0.
   • Enhanced file compression ratio and added display for the current ratio for each shared folder.
   • Added support for cross-protocol locking between SMB and AFP.
   • Supports accessing encrypted shared folders via NFS.
   • Enhanced Btrfs performance and lowered I/O latency.
   • Modularized the SMB file service into a package.
   • Allows users to enable/disable SMB transfer logs for permission changes, providing more flexible transfer logs.
4. User Management
   • Added the ability to delegate predefined administrator roles to non-administrator user accounts and allow them to manage certain services and system settings, offering more flexible permission management.
   • Added the ability to require imported users to change their passwords after their initial DSM logins.
   • Added the ability to assign user accounts from import lists to specific groups.
5. Domain/LDAP Integration
   • Enhanced LDAP client authentication performance by reducing the number of queries sent with a caching mechanism.
6. Security
   • Added the ability to block USB and console ports.
   • Enhanced QuickConnect connection process to strengthen security.
   • Provides only TLS 1.3 support for the Modern Compatibility option for TLS/SSL profile level.
   • Added the ability to set 2-factor authentication as mandatory for specific users or groups.
7. User Experience
   • Enhanced user experience for DSM first-time installation and Synology Account related service setup (e.g. QuickConnect).
   • Added information and usage tips about security, notification, and other recommended settings in DSM Help.
   • Added the ability to back up DSM system configuration to a connected Synology Account.
   • Added severity levels to notifications for better categorization of events.
   • Enhanced user interface responsiveness to launch installed packages and services faster.
   • Enhanced login performance when connecting from external networks.
   • Enhanced user experience for package update processes by displaying the update status with package icons on the DSM desktop.
   • Supports resetting the passwords of all user accounts in the administrators group by pressing the RESET button on Synology NAS for 4 seconds.
   • Enhanced Control Panel usability by reorganizing related functionality together:
     • Added a new Synology Account tab to consolidate future services provided through Synology Account.
     • Consolidated Domain/LDAP options to be configured in a new unified wizard.
     • Consolidated QuickConnect settings into the External Access tab.
     • Consolidated User and Groups settings.
     • Consolidated Theme and Application Portal options into Login Portal tab.
     • Consolidated email notification options into Notification > Email tab.
     • Consolidated WS-Discovery into File Services > SMB.
     • Consolidated Network > DSM Settings into Login Portal > Web Services.
     • Relocated the SMB Server Signing option to File Services > SMB > Advanced Settings.
     • Moved Shared Folder Sync into the File Services tab.
     • Moved the Enforce 2-factor authentication option into the Security tab.
     • Modularized DHCP Server into a package.

il y a 44 minutes, Einsteinium a dit :

Le dossier ce remplira d'ici ce soir

👍 Gros boulot.

Petites question tu les récupères comment les différents .pat? (car normalement lors de l'inscription on devait choisir certains modèles, mais il est possible de modifier l'url du téléchargement pour accéder aux autres modèles)

 

 

⚠️ Pour ceux et celles qui voudraient l'installer. Attention c'est une "preview" (Pour le moments les paquets tiers (Plex, ffmpeg...) ne sont pas compatibles par exemple).

Et il n'y a normalement pas de retour en arrière possible ⚠️

Modifié le 12 septembre 20205 a par maxou56

Merci @Einsteinium de poster les pat du DSM7
Question on peut le test comment ? VM  sur le nas ou un Vm avec ESxi ?

@maxou56 On peut aussi download pour tous les modèles, pas que ceux lier à son compte synology, j'ai tout récupérer un par un pour la communauté, c'était le plus lent à faire. l'envois sur uptobox lui va très vite quand on a 700mbits en upload x)

@firlin J'ai mis aussi la version VDSM

il y a 9 minutes, firlin a dit :

VM  sur le nas

Normalement sur tous les modèles disposant de Virtual Machine Manager. "Other :VirtualDSM"

(Je teste sur un DS3611xs)

il y a 7 minutes, Einsteinium a dit :

j'ai tout récupérer un par un pour la communauté

💪

Modifié le 12 septembre 20205 a par maxou56

Merci 👍

@maxou56 J'ai rajouté suite à ton premier message les changelog, et en bonus les utilities et appli mobile 😉

Une générosité remarquable, merci ;-)

ça me fait peur 😨

merci de bien tester tout cela !

 

Hello

Pour ma pars j'ai telecharger et installer DSM 7.0 un grand merci pour le travail fournis!!

Je vois des dl sur le pat du 916+, des retours ? Demain je migré mon nas dessus après quelques changements...

Bonjour,

j'ai une petite question : on parle " d'installation ", mais est-ce que quelqu'un a déjà tenté une migration DSM6 => DSM7

Merci

Bruno78

Il y a 10 heures, Einsteinium a dit :

Je vois des dl sur le pat du 916+, des retours ? Demain je migré mon nas dessus après quelques changements...

Dommage que le 212+ soit dans les choux: j'aurai également installé DSM7 en dur.

Je ne vois pas que des vdsm en téléchargement, donc je dirais oui sans hésitation 🙂

Update en cours pour ma part, après backup complet et quelques réglages pour ma part, afin d’avoir un update sans anicroche 🙂

il y a 12 minutes, pluton212+ a dit :

Dommage que le 212+ soit dans les choux: j'aurai également installé DSM7 en dur.

L’installation à pris -1 minutes, c’est du rapide, trop rapide à mon goût 🤔

La le monstre reboot, on va voir s’il revient à la vie 🤣

Édit : moins de 10 minutes après, le nas à reboot, ne fermer pas le navigateur après avoir lancer l’update, la j’ai un encart de mise de la base de donnée, suivis de l’update des paquets qui est apparu après le compteur de reboot.

Bonjour,

j'avoue être particulièrement intéressé par le résultat de la migration Photos / Moments DSM6 => Synology Photos DSM7 .....

Pour la migration je ne pourrais pas t'aider, même si la je vais utilisé synology photo pour faire un partage sous peu de temps 🙂

je vais faire un retour dans le topic dédier, ici étant le téléchargement 🙂

Le 26/09/2020 à 22:58, Einsteinium a dit :

Je vois des dl sur le pat du 916+, des retours ? Demain je migré mon nas dessus après quelques changements...

Tu as migré ton NAS principale 🥳😅

Oui oui 🙂

Pour information les prochaines preview, les liens seront mis à disposition par message privé au cas par cas.

Non car quand je vois qu'on est la communauté la moins active sur dsm 7 après toute la réclame qu'il y aura eu, un nombre de téléchargement conséquent des pat, je ne demande pas de venir dire merci ici, mais faire des retours dans la section concernée c'est le minimum syndicale.

Après on demandera pourquoi les demandes de la communauté française ne sont plus prises en comptes... voici déjà un élément de réponse.

Bonjour,
Pour ma part cela intéresserai  de participé mais je manque de temps et j'ai pas un nas de libre pour faire des tests.

Pas sur que cela focntionne en VM sur un vrai faux nas ( on c''est compris sur le mon de ce type de de nas 😉)

@firlin Pas de soucis pour toi, tu es un ancien 🙂

@EinsteiniumJe viens de découvrir ton post, alors que j'ai constaté hier que je n'étais pas inscrit pour la béta.

Un grand merci ; je suis en train de passer un 1513+ de prod qui sert aux sauvegardes, je donnerais les informations du résultat

Bonjour,

J'aimerai me lancer et passer mon DS214play en DSM7 mais comme c'est mon NAS de prod, j'aimerai valider 2/3 choses avant.

Déjà, est ce raisonnable de passer sur la preview sur un NAS principal ?

Ensuite j'ai quelques paquets tiers et je voudrais savoir s'ils tournent correctement sur DSM7:

• Jacquet
• Radarr
• Sonarr
• Rainloop (installé via SSH)

Enfin, je voudrais savoir si ce type d'installation aura un impact sur le paramétrage général du NAS notamment mon serveur mail (je veux pas tout me retaper juste parce que je suis pressé - Si il y a un risque j'attendrai la release officielle)

Merci d'avance pour vos conseils

Salut,

à la vu des questions je dirai qu'il te faut patienter...

 

Modifié le 19 octobre 20205 a par pluton212+

Bonjour,

Moi c'est mon nas principal est j'ai pas mal de chose dessus, mais aucun paquet tiers exotique, tout est dans des dockers (on ne subit pas les problèmes de maj)

Concernant le serveur mail, je ne vois pas spécialement de problème, le paquet étant de synology.